Vente-unique CAMALETI Mid-Sleeper Bed

1. Introduction

Thank you for choosing the Vente-unique CAMALETI Mid-Sleeper Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Warnings

• Always assemble the bed on a soft, clean surface to prevent damage to components.
• Ensure all fittings are securely tightened before use. Periodically check and re-tighten as necessary.
• This bed is designed for a mattress size of 90 x 190 cm. Do not use a mattress that is too thick or too thin, as this may compromise safety.
• Keep small parts out of reach of children during assembly.
• Assembly should ideally be performed by two adults.

2. Package Contents

Before starting assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact Vente-unique customer support.

• Bed frame panels (headboard, footboard, side rails)
• Slatted bed base
• Drawer components (fronts, sides, backs, bottoms)
• Drawer runners/slides
• Hardware pack (screws, dowels, cam locks, Allen keys, etc.)
• Shelf components for integrated shelving unit

3. Setup and Assembly Instructions

Follow these steps carefully for proper assembly. It is recommended to have two people for this process.

Step 1: Unpack and Organize

Carefully unpack all components and lay them out on a clean, soft surface. Group similar parts and hardware together to simplify the assembly process.

Step 2: Assemble the Main Bed Frame

Begin by connecting the headboard and footboard to the side rails using the provided hardware. Ensure all connections are firm and stable. Refer to the detailed diagrams in your physical manual for specific joint types.

Image 1: The CAMALETI mid-sleeper bed with all drawers closed, showcasing its compact design in a child's bedroom setting.

Step 3: Install the Slatted Bed Base

Once the main frame is assembled, carefully place and secure the slatted bed base within the frame. Ensure the slats are evenly spaced and firmly attached to the side rails according to the instructions.

Step 4: Assemble the Drawers

Assemble each of the six drawers individually. Attach the drawer sides, back, and bottom to the drawer front. Install the drawer runners onto the sides of each drawer.

Image 2: The CAMALETI mid-sleeper bed with several drawers open, illustrating the ample storage space available beneath the bed.

Step 5: Install the Drawers and Shelving Unit

Attach the corresponding drawer runners to the bed frame structure. Carefully slide each assembled drawer onto its runners. Finally, assemble and integrate the shelving unit into the designated area of the bed frame, securing it with the provided hardware.

Image 3: An angled perspective of the CAMALETI bed, highlighting the open drawers and the integrated shelving unit.

4. Operating Instructions

Using the Bed

• Place a standard 90 x 190 cm mattress on the slatted base. Ensure the mattress fits snugly within the frame.
• The bed is designed for sleeping and resting. Avoid excessive jumping or rough play on the bed to prevent damage and ensure safety.

Using the Drawers

• The six integrated drawers provide convenient storage. Pull the drawer fronts gently to open and push to close.
• Do not overload the drawers. Distribute weight evenly to ensure smooth operation and prevent damage to the runners.
• Avoid forcing drawers open or closed if they encounter resistance. Check for obstructions.

5. Maintenance

Cleaning

• Wipe the bed frame and drawers with a soft, damp cloth.
• For stubborn marks, use a mild, non-abrasive cleaner specifically designed for engineered wood surfaces.
• Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
• Dry immediately with a clean, soft cloth.

Regular Checks

• Periodically (e.g., every 3-6 months) check all screws, bolts, and fittings to ensure they are tight. Re-tighten if necessary to maintain stability and safety.
• Inspect drawer runners for any signs of wear or damage.

6. Troubleshooting

Drawers are difficult to open/close:

• Check for obstructions: Ensure nothing is blocking the drawer's path or caught in the runners.
• Even weight distribution: Make sure the drawer is not overloaded or unevenly weighted.
• Runner alignment: Verify that the drawer runners are correctly installed and aligned on both the drawer and the bed frame.
• Lubrication: A small amount of silicone spray on the runners can improve smoothness.

Bed feels unstable or wobbly:

• Tighten all fittings: Go through all assembly points and re-tighten screws and bolts. Do not overtighten.
• Level surface: Ensure the bed is placed on a flat, level floor. Use shims if necessary to stabilize.
• Correct assembly: Double-check that all components are assembled according to the instructions.

Missing or damaged parts:

• If you discover any missing or damaged parts upon unpacking, do not proceed with assembly. Contact Vente-unique customer support immediately for assistance.

7. Specifications

8. Warranty and Support

Your Vente-unique CAMALETI Mid-Sleeper Bed comes with a manufacturer's warranty. Please refer to your purchase documentation or the Vente-unique website for specific warranty terms and conditions.

For technical assistance, missing parts, or any other inquiries, please contact Vente-unique customer support:

• Website: www.vente-unique.com (or your regional Vente-unique website)
• Customer Service: Refer to the contact information provided with your purchase or on the official Vente-unique website.