Introduction
Welcome to the ATTACK SHARK X11 Lightweight Tri-Mode Wireless Gaming Mouse manual. This guide provides essential information for setting up, operating, and maintaining your new gaming mouse. Please read this manual thoroughly to ensure optimal performance and longevity of your device.
Package Contents
- ATTACK SHARK X11 Wireless Gaming Mouse
- RGB Charging Dock
- USB-C to USB-A Cable
- 2.4G USB Receiver (often stored in the mouse or dock)
- Anti-slip Grip Tape
- User Manual (this document)
Image: The ATTACK SHARK X11 mouse and its RGB charging dock, showcasing the complete package.
Product Overview
Familiarize yourself with the components of your ATTACK SHARK X11 mouse.
Image: An exploded diagram illustrating the internal components of the ATTACK SHARK X11 mouse, including the lightweight material case, engineering curved keys, lithium battery, PCB, TTC encoder, HUYU switches, and PAW3311 sensor.
Image: A top-down view of the ATTACK SHARK X11 mouse, highlighting its ergonomic shape and button layout.
Setup
1. Charging the Mouse
The ATTACK SHARK X11 mouse can be charged using the included RGB charging dock or directly via the USB-C cable.
- Connect the USB-C cable to the charging dock and a power source (e.g., computer USB port, USB wall adapter).
- Gently place the mouse onto the charging dock. The magnetic connection will secure it, and the RGB lighting on the dock will indicate charging status.
- Alternatively, connect the USB-C cable directly to the mouse for charging.
Image: The ATTACK SHARK X11 mouse magnetically attached to its RGB charging dock, illustrating the charging process.
2. Connecting via 2.4G Wireless Mode
For optimal gaming performance, use the 2.4G wireless connection.
- Locate the 2.4G USB receiver. It is typically stored in a compartment on the underside of the mouse or within the charging dock.
- Plug the USB receiver into an available USB port on your computer.
- On the underside of the mouse, slide the mode switch to the "2.4G" position.
- The mouse should automatically connect.
Image: A diagram showing the three connectivity modes: 2.4GHz wireless, Bluetooth, and USB-C wired, with the 2.4GHz receiver plugged into a laptop.
3. Connecting via Bluetooth Mode
The mouse supports two Bluetooth channels (BT1, BT2).
- On the underside of the mouse, slide the mode switch to the "BT" position.
- Press and hold the "Mode Switch" button (usually located near the DPI switch) for 3 seconds to enter pairing mode. The indicator light will flash.
- On your device (PC, laptop, tablet), go to Bluetooth settings and select "ATTACK SHARK X11" to pair.
- Repeat for the second Bluetooth channel if desired.
Image: The underside of the ATTACK SHARK X11 mouse, highlighting the mode switch and DPI switch buttons.
4. Connecting via USB-C Wired Mode
- Connect the USB-C end of the cable to the mouse and the USB-A end to your computer.
- The mouse will automatically switch to wired mode and begin charging.
Operation
DPI Adjustment
The mouse features 6 adjustable DPI levels (800-1600-2400-3200-5000-22000).
- Press the "DPI Switch" button on the underside of the mouse to cycle through DPI settings.
- Each DPI level is indicated by a different color light inside the mouse.
Image: The ATTACK SHARK X11 mouse highlighting the PAW3311 sensor and its high DPI capabilities.
Programmable Buttons
The ATTACK SHARK X11 has 5 programmable buttons.
- Download the official ATTACK SHARK driver software from the manufacturer's website.
- Use the software to customize button functions, set macros, adjust polling rate, LOD (Lift-Off Distance), and other settings.
Image: A screenshot of the ATTACK SHARK X11 driver software interface, showing options for button remapping, DPI settings, polling rate, and macro management.
RGB Lighting Control
The RGB charging dock features customizable backlight effects.
- Use the dedicated button on the charging dock to cycle through different RGB lighting effects.
- Further customization may be available through the driver software.
Image: The RGB charging dock displaying its customizable lighting effects.
Using Grip Tape
The included anti-slip grip tape can be applied to the mouse for enhanced grip and sweat absorption, improving control during intense gaming sessions.
- Ensure the mouse surface is clean and dry.
- Carefully peel the backing from the grip tape and apply it to the desired areas on the mouse.
- Press firmly to secure.
Maintenance
Cleaning
- Disconnect the mouse from all power sources.
- Use a soft, dry cloth to wipe the surface of the mouse and charging dock.
- For stubborn dirt, slightly dampen the cloth with water. Avoid harsh chemicals.
- Use a cotton swab or compressed air to clean around buttons and the optical sensor.
Battery Care
- To prolong battery life, avoid fully discharging the mouse frequently.
- Store the mouse in a cool, dry place when not in use for extended periods.
Troubleshooting
Mouse Not Responding
- Ensure the mouse is charged.
- Check the mode switch on the underside of the mouse to ensure it's set to the correct connection type (2.4G, BT, or Wired).
- For 2.4G, ensure the USB receiver is securely plugged in.
- For Bluetooth, ensure the mouse is paired correctly and your device's Bluetooth is enabled. Try re-pairing.
- Try connecting via USB-C wired mode to rule out wireless issues.
Lag or Disconnections
- Ensure the mouse is fully charged.
- Reduce interference by moving other wireless devices away from the receiver.
- For 2.4G, ensure the receiver is in line of sight with the mouse. Using the charging dock's USB port for the receiver can improve signal.
- Update mouse firmware via the ATTACK SHARK driver software.
DPI/Button Settings Not Working
- Ensure the ATTACK SHARK driver software is installed and running.
- Check that your custom profiles are active in the software.
- Restart the software and/or your computer.
Specifications
| Feature | Detail |
|---|---|
| Model | X11 |
| Brand | ATTACK SHARK |
| Connectivity | Tri-Mode (2.4G Wireless, Bluetooth, USB-C Wired) |
| Sensor | PAW3311 Optical Sensor |
| DPI | 800-22000 (6 adjustable levels) |
| Tracking Speed | 300 IPS |
| Response Rate | 1000Hz |
| Acceleration | 35G |
| Weight | Approx. 62g |
| Switches | HUYU Switch, TTC Encoder |
| Click Lifespan | 20 Million Clicks |
| Buttons | 5 Programmable Buttons |
| Compatibility | Windows XP / VISTA / 7 / 8 / 10 / MAC |
| Special Features | RGB Charging Dock, Ergonomic Design, Anti-slip Grip Tape |
Image: An illustration of the Broadcom's main control chip integrated into the ATTACK SHARK X11 mouse, emphasizing its advanced processing capabilities.
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official ATTACK SHARK website or contact their customer service. Keep your proof of purchase for warranty claims.
Official Product Videos
Watch these official videos for visual guides and demonstrations of the ATTACK SHARK X11 mouse features.
Video: An overview of the ATTACK SHARK X11 Lightweight Wireless Gaming Mouse with RGB Charging Dock, demonstrating its features and functionality.
Video: A detailed look at the ATTACK SHARK X11 Lightweight Wireless Gaming Mouse, showcasing its design and performance.
