1. Introduction
This manual provides detailed instructions for the safe and effective use of your SNOW Diamond Wired LED Teeth Whitening Kit. This kit is designed to deliver professional-grade teeth whitening results from the comfort of your home, utilizing an advanced LED mouthpiece and a specially formulated whitening serum.
Please read this manual thoroughly before first use and retain it for future reference.
2. Safety Information
- For oral use only. Do not swallow.
- If sensitivity or irritation occurs, discontinue use. Consult a dental professional if needed.
- Keep out of reach of children.
- Do not use if pregnant or breastfeeding without consulting a doctor.
- Avoid contact with eyes. In case of contact, rinse thoroughly with water.
- Store in a cool, dry place away from direct sunlight.
3. Product Components
Your SNOW Diamond Wired LED Teeth Whitening Kit includes the following items:
- Wired LED Mouthpiece
- Diamond Whitening Serum Wand(s)
- Shade Guide
- User Manual (this document)
Figure 3.1: SNOW Diamond Wired LED Teeth Whitening Kit components, including the LED mouthpiece and a whitening serum wand.
4. Setup
Before your first whitening session, please follow these setup steps:
- Unpack Components: Carefully remove all items from the packaging.
- Inspect Device: Check the LED mouthpiece and serum wand for any visible damage. Do not use if damaged.
- Clean Mouthpiece: Rinse the LED mouthpiece with cool water and dry thoroughly before initial use. Do not submerge the wired connection in water.
- Connect Mouthpiece: The wired LED mouthpiece connects to a compatible power source (e.g., smartphone, USB wall adapter) using the provided cable. Ensure a secure connection.
5. Operating Instructions
Follow these steps for each teeth whitening session. For optimal results, use for 9 minutes daily.
- Brush Your Teeth: Thoroughly brush your teeth to remove any food particles or plaque. This ensures the whitening serum can effectively contact your tooth surface.
- Apply Whitening Serum: Twist the bottom of the Diamond Serum Wand until a small drop of serum appears on the brush tip. Apply a thin, even layer of the serum directly to the front surfaces of your teeth, avoiding gums.
- Insert LED Mouthpiece: Place the LED mouthpiece into your mouth, ensuring it covers all teeth you wish to whiten. Bite down gently to hold it in place.
- Activate LED: Connect the wired mouthpiece to your power source. The LED light will activate automatically. Keep the mouthpiece in for the recommended duration (e.g., 9 minutes).
- Rinse After Use: After the session, remove the mouthpiece and rinse your mouth thoroughly with water. Rinse the mouthpiece with cool water and dry it.
- Track Progress: Use the included shade guide to monitor your whitening progress over time.
Figure 5.1: Visual guide to the four steps of the whitening process.
6. Ingredients
The SNOW Diamond Whitening Serum contains the following ingredients:
Active Ingredients: Potassium Nitrate 5%.
Inactive Ingredients: Glycerin, Carbamide Peroxide, Water (Aqua), Propylene Glycol, Sorbitol, Hydrogen Peroxide, Carbomer, Stevia Rebaudiana Leaf Extract, Mentha Piperita (Peppermint) Oil, Mentha Arvensis Leaf Oil, Sucralose, Hydroxyapatite, Sodium Stannate, Sodium Tripolyphosphate.
7. Maintenance
- Cleaning the Mouthpiece: After each use, rinse the LED mouthpiece with cool water. Do not use hot water. Gently wipe with a soft cloth. Ensure the wired connection area remains dry.
- Storing the Serum: Keep the whitening serum wand capped tightly when not in use. Store in a cool, dry place, away from direct sunlight and extreme temperatures.
- General Storage: Store the entire kit in its original packaging or a clean, dry place when not in use.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No whitening results | Inconsistent use, insufficient application time, improper serum application, or heavy staining. | Ensure daily use for recommended duration. Apply a thin, even layer of serum. Brush teeth thoroughly before application. Allow more time for results with heavy staining. |
| Increased tooth sensitivity | Overuse of serum, pre-existing sensitivity, or gum contact. | Reduce application time or frequency. Ensure serum is applied only to teeth, avoiding gums. If sensitivity persists, discontinue use and consult a dental professional. |
| LED mouthpiece not turning on | Loose connection, faulty power source, or device malfunction. | Check that the wired connection is secure. Try a different USB port or power adapter. If the issue persists, contact customer support. |
9. Specifications
- Brand: SNOW
- Model: Diamond Wired LED Teeth Whitening Kit
- ASIN: B0D3J8TSC3
- Product Dimensions: 4.69 x 2.56 x 5.69 inches
- Item Weight: 7.36 ounces
- Item Form: Gel
- Active Ingredients: Hydrogen Peroxide, Potassium Nitrate 5%
- Product Benefits: Whitening
10. Warranty & Support
For information regarding warranty coverage, product support, or to purchase replacement parts and serum, please visit the official SNOW website or contact their customer service department. Contact details can typically be found on the product packaging or the brand's official online store.
SNOW Official Store: Visit the SNOW Store on Amazon
11. Legal Disclaimer
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
