1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your TEEHO TE003 Keyless Entry Keypad Door Lock with Handle. Please read this manual thoroughly before installation and use to ensure proper function and security.
Image: TEEHO Keyless Entry Keypad Door Lock with Handle in Matte Black, shown with two physical backup keys.
2. Product Overview and Components
The TEEHO TE003 is an electronic digital smart lock designed for keyless entry. It features a keypad for code entry and a traditional handle for manual operation. The package includes all necessary components for installation.
Key Features:
- Multiple Unlock Methods: Up to 20 user passwords, two physical keys, one-time codes, and passage mode.
- Automatic Locking: Configurable auto-lock feature (10-99 seconds) or manual one-touch locking.
- Enhanced Security: Anti-peeping password function, wrong code entry limit, ANSI Grade 3 certified, IP54 weather resistance.
- Easy Installation: Designed for quick installation with a single screwdriver, no drilling required for standard door preparations.
Included Components:
- Keypad Door Knob (Exterior Assembly)
- Interior Door Knob Assembly
- Mounting Plate
- Latch
- Strike Plate
- Screws
- 2 Backup Keys
- Instructions Manual
3. Setup and Installation
Before beginning installation, ensure your door meets the compatibility requirements. The lock is designed for easy installation, typically within 10 minutes, using only a screwdriver.
Door Compatibility Requirements:
Image: Diagram illustrating critical door measurements for compatibility, including door thickness, backset, latchbolt throw, and hole diameter.
- Door Thickness: 1-3/8" to 2" (35mm-50mm)
- Backset: 2-3/8" (60mm) or 2-3/4" (70mm)
- Latchbolt Throw: 3/4" (20mm)
- Hole Diameter: 2-1/8" (54mm)
The lock automatically identifies left and right door orientations during installation, simplifying the setup process.
Image: Illustration of the lock's ability to automatically identify and adapt to both left and right-handed door installations.
Installation Steps (Summary):
- Prepare the door: Ensure the door meets the specified dimensions and has a 2-1/8" (54mm) hole.
- Install the latch: Insert the latch into the door edge and secure it with screws.
- Install the exterior assembly: Place the keypad door knob assembly through the door hole.
- Install the interior assembly: Connect the interior door knob assembly to the exterior assembly, ensuring proper cable routing.
- Secure the lock: Fasten the mounting plate and interior assembly with screws.
- Install batteries: Insert 4 AA alkaline batteries (not included) into the interior assembly.
- Test the lock: Verify that the lock operates correctly using the default code or a physical key.
Image: A person installing the TEEHO keypad door lock using a screwdriver, highlighting the ease of installation.
4. Operating Instructions
The TEEHO TE003 offers multiple convenient ways to secure and access your property.
Unlocking Methods:
Image: Visual representation of the five available unlocking methods for the TEEHO keypad door lock.
- User Passwords: Store up to 20 unique user codes for regular access.
- Physical Keys: Two backup keys are provided for traditional manual unlocking.
- One-Time Code: Generate a temporary code that automatically deletes after a single use, ideal for guests or service personnel.
- Passage Mode: Disable automatic locking for continuous access, useful for high-traffic periods.
- Anti-Peeping Password: Enter random digits before or after your actual code to prevent others from guessing your password.
Image: Demonstration of the anti-peeping password feature, where random digits can be used to obscure the actual code.
Locking Methods:
- Automatic Locking: The lock can be configured to automatically lock within 10-99 seconds after the door closes.
- One-Touch Lock: From the outside, hold any key on the keypad for 2 seconds to manually lock the door.
- Manual Locking (Interior): Use the thumb turn on the interior knob to lock the door.
Image: A visual explanation of the auto-lock feature and the one-touch manual locking function.
Special Modes:
- Vacation Mode: A security feature to disable all user codes for extended periods, enhancing security when away.
- Mute Mode: Silence keypad beeps for quiet operation.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your TEEHO TE003 lock.
Battery Management:
- The lock requires 4 AA alkaline batteries. Rechargeable batteries are not recommended.
- A low battery alert will illuminate on the keypad when battery power is at approximately 15%. Replace batteries promptly when this alert appears.
Image: Illustration of the low battery alert indicator and a reminder against using rechargeable batteries.
Cleaning and Care:
- Clean the lock's exterior with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
- Do not expose the lock to excessive moisture or direct water spray, despite its IP54 rating, to prevent potential damage.
Environmental Considerations:
- The lock is IP54 weather resistant, offering protection against dust and splashing water.
- It is designed to operate within a temperature range of -22°F to 158°F (-30°C to 70°C).
Image: Visual representation of the lock's weather resistance and temperature tolerance.
6. Troubleshooting
If you encounter issues with your TEEHO TE003 lock, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lock does not respond to keypad entry. | Low batteries; incorrect code; keypad malfunction. | Replace batteries; re-enter code carefully; use backup key. |
| Auto-lock feature not working. | Auto-lock disabled; incorrect time setting. | Ensure auto-lock is enabled and set to desired delay. |
| Lock beeps continuously or flashes. | Low battery warning; error code. | Replace batteries; consult the full manual for specific error codes. |
| Physical key does not work. | Incorrect key; obstruction in keyway. | Ensure you are using the correct key; check for debris in the keyway. |
| Lock feels loose after installation. | Screws not tightened sufficiently. | Retighten all mounting screws. Do not overtighten. |
For more complex issues or if troubleshooting steps do not resolve the problem, please contact TEEHO customer support.
7. Specifications
Detailed technical specifications for the TEEHO TE003 Keyless Entry Keypad Door Lock with Handle.
| Feature | Detail |
|---|---|
| Brand | TEEHO |
| Model Name | TE003 |
| Lock Type | Keypad, Combination Lock |
| Material | Aluminum |
| Color | Matte Black |
| Product Dimensions (L x W x H) | 5.43 x 3 x 3.5 inches (137 x 76 x 89 mm) |
| Item Weight | 2.71 pounds (1.23 kg) |
| Power Source | 4 x AA Batteries (not included) |
| Special Features | Passage Mode, Back-Lit Keypad, 20 Individual User Codes, One-time Access, Auto Lock, One-touch Lock, Anti-peeping Password, Vacation Mode, Mute Mode, Wrong Entry Limit, IP54 Waterproof |
| Certifications | ANSI Grade 3, IP54 Weather Resistance |
| Durability Tests | 200,000 Times Keypad life test, 5337 N Fastening screw pull test, 100J Face plate impact test, 240 Hour Salt Spray Test |
Image: Detailed dimensional drawing of the TEEHO TE003 lock, showing height, width, and depth of both interior and exterior components.
8. Warranty and Support
TEEHO is committed to providing reliable products and customer service.
Warranty Information:
- Customer Commitment: 30-day satisfaction guarantee.
- Product Support: 1-year warranty on all parts.
Customer Service:
TEEHO offers lifetime after-sales customer service to assist with any questions or issues you may encounter.
- Online Phone Support: Available Monday to Friday, 9 AM to 5 PM PST.
- Online Email Service: Available 24/7.
Please refer to the contact information provided with your product packaging or visit the official TEEHO website for support details.
