Introduction
Thank you for choosing the addlon 52 Inch Flush Mount Ceiling Fan with Lights. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new ceiling fan. This fan features a noiseless DC motor, reversible blades for year-round comfort, a 3-color temperature dimmable LED light, and convenient remote control options.
Image: The addlon 52-inch flush mount ceiling fan with lights, showcasing its modern design and integrated lighting.
Safety Information
- Always turn off the power at the circuit breaker before installation or maintenance.
- Ensure all electrical connections comply with local codes and ordinances.
- Consult a qualified electrician if you are unfamiliar with electrical wiring.
- Mount the fan to a ceiling outlet box marked "Acceptable for Fan Support of 35 lbs (15.9 kg) or less."
- Do not connect the fan to a dimmer switch or a fan gear switch, as this may damage the motor or light.
- Ensure fan blades are installed at least 7 feet (2.1 meters) from the floor.
Setup and Installation
The addlon ceiling fan is designed for easy installation. Please follow the detailed instructions provided in the separate installation guide included with your product. A video tutorial is also available to assist you.
Package Contents:
- Ceiling Fan Unit
- Mounting Hardware
- Remote Control
- Wall Remote Control
Pre-Installation Considerations:
- Verify that your ceiling junction box is suitable for fan support.
- Ensure sufficient clearance for blade rotation (at least 7 feet from the floor).
- Select the desired blade color (nickel or oak grain) before assembly, as blades are double-sided.
Installation Video:
Video: Official addlon Ceiling Fans with Lights installation guide. This video demonstrates the assembly and mounting process for the ceiling fan.
Image: Visual representation of the easy installation process, highlighting reduced installation time and potential electrician fees.
Operating Instructions
Remote Control Functions:
Your addlon ceiling fan comes with a handheld remote control and a wall-mounted remote control for convenient operation. Both remotes offer the following functions:
- Power On/Off: Turns the fan and light on or off.
- Fan Speed Adjustment: Select from 6 wind speeds (Levels 1-2 for comfortable wind, 3-4 for natural wind, 5-6 for strong cooling wind).
- Timer Settings: Set the fan to turn off automatically after 1, 2, or 4 hours.
- Reversible DC Motor: Change the direction of blade rotation for summer (downward airflow) or winter (upward airflow to circulate warm air).
- Light On/Off: Control the light independently from the fan.
- Light Dimming: Adjust light brightness from 10% to 100%.
- Color Temperature Selection: Choose between 3000K (warm white), 4000K (neutral white), and 6500K (cool white). This setting is typically adjusted on the LED light board itself during installation or by removing the light cover.
Image: The handheld remote control for the addlon ceiling fan, showing buttons for power, fan speed, light control, timer, and reverse function.
Wall Switch Control:
The included wall switch remote can be mounted next to your existing light switch for easy access. It provides basic on/off control for the fan and light. Ensure your main wall switch is in the ON position for the remote controls to function.
Image: Illustration of the wall switch control, showing how it can be fixed near a standard wall switch for convenient access.
Memory Function:
The fan and light feature a memory function. When turned off and then back on, they will resume their last operating settings (fan speed, light brightness, and color temperature) without needing to be reset.
Image: Diagram illustrating the memory function, showing the fan and light retaining their previous settings after being powered off and on.
Maintenance
- Cleaning: To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- Blade Care: Periodically check the blade screws for tightness. Loose blades can cause wobbling and noise.
- Light Kit: The LED light kit is replaceable. If replacement is needed, contact customer support for guidance.
- General Inspection: Regularly inspect the fan for any signs of damage or wear. If any issues are found, discontinue use and contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections; Remote control not paired or batteries dead. | Check circuit breaker; Ensure all wires are securely connected; Replace remote batteries or re-pair remote. |
| Light does not work | Loose wire connections; LED light kit failure; Remote control issue. | Check light wiring; Contact customer support for LED kit replacement; Check remote batteries. |
| Fan wobbles | Loose blade screws; Unbalanced blades; Improper mounting. | Tighten all blade screws; Use balancing kit (not included) if necessary; Re-check mounting bracket security. |
| Remote control not responding | Dead batteries; Remote not paired; Interference. | Replace batteries; Re-pair the remote control according to instructions; Ensure no strong interference sources nearby. |
| Fan is noisy | Loose screws; Motor issue; Blades hitting an obstruction. | Check and tighten all screws; Ensure no obstructions; If noise persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | addlon |
| Model Name | KFM52PLY5B02R1-1 |
| Size | 52 Inch |
| Color | Nickel |
| Product Dimensions | 52"D x 52"W x 11"H |
| Power Source | AC |
| Motor Type | DC Motor |
| Number of Blades | 5 |
| Blade Material | Engineered Wood (Reversible: Nickel/Oak Grain) |
| Number of Speeds | 6 |
| Noise Level | 35 Decibels |
| Air Flow Capacity | 4793 Cubic Feet Per Minute |
| Light Type | LED |
| Color Temperature | 3000K/4000K/6500K (Selectable) |
| Dimmable | 10%-100% |
| Control Method | Remote Control (Handheld & Wall Remote) |
| Indoor/Outdoor Usage | Indoor, Outdoor (Not to be exposed directly to rain) |
| Special Features | Reversible, Timer, Memory Function |
Warranty Information
addlon offers a comprehensive warranty for your peace of mind:
- Motor Warranty: Up to 120 months (10 years) warranty on the motor.
- Other Parts Warranty: 2 years warranty on all other fan components.
This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Image: Graphic detailing the 10-year motor warranty and 2-year warranty for other parts, emphasizing customer satisfaction.
Customer Support
For any questions regarding installation, operation, maintenance, or warranty claims, please do not hesitate to contact our customer support team. We are available 24 hours a day to assist you.
Please refer to the contact information provided with your product packaging or visit the official addlon website for support details.
Image: Illustration of customer service representatives, highlighting the availability of a 24-hour support team.
