Fastrack Pulse Quartz Analog Watch NT1474QM02 User Manual

1. Introduction

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Fastrack Pulse Quartz Analog Watch, model NT1474QM02. Please read this guide carefully to ensure proper use and longevity of your timepiece.

Image 1.1: Front view of the Fastrack Pulse Quartz Analog Watch (NT1474QM02). This image displays the watch face with its beige textured dial, square case, and brown stainless steel strap.

2. Setup

2.1 Setting the Time

1. Pull out the crown: Gently pull the crown (the small knob on the side of the watch case) to the outermost position. You may feel a slight click.
2. Adjust the time: Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
3. Push in the crown: Once the time is set, push the crown back into its original position against the watch case. This will start the watch movement.

Image 2.1: Side view of the Fastrack Pulse Quartz Analog Watch, highlighting the crown used for time adjustment.

2.2 Adjusting the Bracelet

The stainless steel bracelet may require adjustment to fit your wrist comfortably. It is recommended to have this adjustment performed by a professional watchmaker or an authorized Fastrack service center to prevent damage to the links or clasp mechanism.

3. Operation

3.1 Reading the Time

Your Fastrack Pulse watch features an analog display with hour, minute, and second hands. The orange-accented second hand provides a clear indication of seconds.

3.2 Water Resistance

This watch is rated for 50 meters (5 ATM) water resistance. This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water. It is not suitable for swimming, diving, or showering with hot water, as steam and temperature changes can compromise the seals.

• Do not operate the crown while the watch is wet or submerged.
• Ensure the crown is fully pushed in before any contact with water.

4. Maintenance

4.1 Cleaning Your Watch

To maintain the appearance of your watch:

• Wipe the case and strap with a soft, dry cloth regularly.
• For stainless steel, a slightly damp cloth can be used, followed by immediate drying.
• Avoid using chemical cleaners, solvents, or abrasive materials, as these can damage the finish.

4.2 Battery Replacement

Your Fastrack Pulse watch is powered by a quartz movement, which requires a battery. The battery life typically ranges from 2 to 3 years. When the watch stops or the second hand begins to skip, it is an indication that the battery needs replacement. It is recommended to have the battery replaced by an authorized service center to ensure proper sealing and prevent damage to the movement.

4.3 Storage

When not wearing your watch, store it in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. The original packaging or a watch box is ideal for storage.

5. Troubleshooting

5.1 Watch Not Running

• Check the crown: Ensure the crown is fully pushed in against the watch case. If it is pulled out, the watch will not run.
• Battery: If the crown is correctly positioned and the watch still does not run, the battery may need replacement. Refer to section 4.2.

5.2 Inaccurate Time

• Battery: A weak battery can cause the watch to run slowly or erratically.
• Magnetic fields: Exposure to strong magnetic fields (e.g., from speakers, refrigerators, or certain electronic devices) can temporarily affect the watch's accuracy. Move the watch away from the source of magnetism.
• Impact: A severe impact can affect the internal mechanism. If the issue persists, contact customer support.

5.3 Water Ingress

If you notice moisture or condensation inside the watch, immediately take it to an authorized service center. Do not attempt to open the watch yourself, as this can void the warranty and cause further damage.

6. Specifications

7. Warranty Information

Your Fastrack Pulse watch comes with a 12-month manufacturer warranty covering manufacturing defects. To avail warranty services, you must present your original purchase invoice at any authorized Titan Service Center.

Note: A physical warranty card is not required. The invoice serves as proof of purchase for warranty claims.

8. Customer Support

For further details or service-related inquiries, please contact Fastrack/Titan customer support:

• Toll-Free Number: 1800-266-0123 (available 10 AM to 7 PM, all days of the week)
• Email: customercare@titan.co.in
• Manufacturer Address: 3, Sipcot Industrial Complex, Hosur - 635126, Titan Company Limited, Sipcot Industrial Complex, Hosur, Tamil Nadu - 635129