KEMIMOTO Lithium Powersports Battery User Manual

Introduction

This manual provides essential information for the safe and effective use of your KEMIMOTO LiFePO4 Lithium Powersports Battery, Model MCB-600012H01. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of your battery.

Image: KEMIMOTO Lithium Powersports Battery, highlighting its compact design.

Safety Information

• Always wear appropriate personal protective equipment, including safety glasses and gloves, when handling batteries.
• Do not short-circuit the battery terminals. This can cause severe damage to the battery and pose a fire hazard.
• Keep the battery away from open flames, sparks, and heat sources.
• Ensure proper ventilation during charging and operation.
• Use only chargers specifically designed for LiFePO4 batteries. Using an incompatible charger can damage the battery and create a safety risk.
• Do not disassemble, puncture, or modify the battery.
• If the battery is damaged or leaking, avoid contact with the contents and dispose of it properly according to local regulations.
• Keep out of reach of children.

Package Contents

Your KEMIMOTO Lithium Powersports Battery package includes:

• 1 x KEMIMOTO LiFePO4 Lithium Powersports Battery (Model MCB-600012H01)
• 2 x Terminal Screws
• 5 x Universal-Fit EVA Spacers
• 1 x User Manual

Product Features

The KEMIMOTO LiFePO4 Lithium Powersports Battery offers advanced features for enhanced performance and durability:

• Pre-Charged & Power Display: The battery comes pre-charged and includes a power display for immediate use and easy monitoring of charge status. Pure copper terminals ensure high current discharge and superior conductivity.
• Adjustable Spacers & Threaded Terminals: Equipped with 2 threaded-lug posts, eliminating the need for nuts during installation. Five adjustable universal-fit EVA spacers are included to ensure compatibility with various battery compartments, including those designed for YTX14-BS, YTX9-BS, YTX12-BS, YT12A-B2, YTZ10S-BS, YTZ12S-BS, YTZ14S-BS, YTX16-BS, YTX14S, YTZ10S, and YT12A-B2 models.
• Long-Lasting LiFePO4 Technology: As a LiFePO4 battery, it is approximately 3 times lighter, provides 2 times more power, offers 8-10 times longer service life, and charges 5 times faster than traditional lead-acid batteries. It boasts a 4 times longer cycle life, reaching over 3000 cycles with 100% depth of discharge (DOD).
• Integrated Battery Management System (BMS): The advanced BMS protects the battery from over-charge, over-discharge, short-circuit, over-temperature (cuts out above 172°F), and under-temperature (cuts out below -2°F for 6 hours).
• Universal Mounting: Designed for broad compatibility, suitable for ATVs, motorcycles, tractors, trailers, electric scooters, riding lawn mowers, jet skis, quads, go-karts, UTVs, snowmobiles, and PWC.

Image: Detailed view of the battery's power level indicator and threaded terminals.

Image: Illustration of the battery with included EVA spacers for universal fit.

Image: Comparison table highlighting the advantages of LiFePO4 over lead-acid batteries.

Specifications

Image: Visual representation of battery dimensions and key specifications.

Setup and Installation

Follow these steps for proper installation of your KEMIMOTO Lithium Powersports Battery:

1. Preparation: Ensure your vehicle's ignition is off and remove the old battery. Clean the battery tray and terminals if necessary.
2. Fitment: Place the KEMIMOTO battery in the battery compartment. If the battery is smaller than the original, use the provided EVA spacers to secure it snugly. The spacers can be stacked or cut to achieve the correct height and width.
3. Connection: Connect the positive (+) terminal (red cable) first, then the negative (-) terminal (black cable). The battery features threaded-lug posts, so simply insert the terminal screws and tighten them securely. Ensure connections are firm to prevent vibration and poor contact.
4. Verify: Double-check all connections for correct polarity and tightness.

Image: Diagram illustrating different connection methods for the threaded terminals.

Installation Videos

Operating Instructions

Your KEMIMOTO LiFePO4 battery is designed for reliable performance. Here are some operational considerations:

• Initial Start-up: The battery is pre-charged and ready for use upon installation.
• Power Display: Monitor the battery's charge level using the integrated power display. An orange light indicates a full charge.
• Cold Weather Operation: In very cold temperatures (below -2°F), the battery's performance may be temporarily reduced. To optimize starting power, turn on your vehicle's ignition (without cranking the engine) and allow the battery to warm up for approximately one minute. Then, turn the ignition off and proceed to crank the engine. The BMS will protect the battery from discharge below -2°F.

Image: A hand pressing a motorcycle start button, symbolizing quick and powerful performance.

Maintenance

The KEMIMOTO LiFePO4 Lithium Powersports Battery is designed to be maintenance-free. Unlike lead-acid batteries, it does not require activation, acid, water, or regular charging during storage under normal conditions.

• Charging: If extended storage or specific applications require charging, use only a charger that is compatible with LiFePO4 batteries. Using a standard lead-acid battery charger can damage the battery.
• Cleaning: Keep the battery terminals clean and free of corrosion. Use a dry cloth to wipe down the battery casing as needed.
• Storage: For long-term storage, ensure the battery is adequately charged and stored in a cool, dry place within its specified temperature range.

Troubleshooting

If you encounter issues with your KEMIMOTO Lithium Powersports Battery, consider the following:

• Vehicle Not Starting:
  • Check all battery connections to ensure they are secure and free from corrosion.
  • Verify the battery's charge level using the power display. If low, charge with a LiFePO4 compatible charger.
  • In cold conditions, perform the cold weather warm-up procedure described in the Operating Instructions.
• Battery Not Holding Charge:
  • Ensure your vehicle's charging system (alternator/stator and regulator) is functioning correctly. A faulty charging system can prevent the battery from recharging.
  • Confirm that no parasitic drains are present in your vehicle's electrical system when the ignition is off.
  • If using a battery tender, ensure it is specifically designed for LiFePO4 batteries.
• CCA (Cold Cranking Amps) Appears Lower Than Advertised: While the battery is rated for 480A CCA, slight variations may occur. If your vehicle starts reliably, this may not indicate a fault. If starting issues persist, refer to the 'Vehicle Not Starting' steps.
• Battery Health Decreasing Rapidly: If you observe a significant and rapid decrease in battery health or performance, contact KEMIMOTO customer support for assistance.

Warranty and Support

Your KEMIMOTO Lithium Powersports Battery (Model MCB-600012H01) comes with a 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your battery, please contact KEMIMOTO customer service through the retailer where you purchased the product or visit the official KEMIMOTO website for contact information.

Please retain your proof of purchase for warranty validation.