Introduction
This manual provides instructions for the replacement of the Simply Conserve 1000 Series Tabletop Air Purifier 3-Stage Replacement Filter (Model: AM-AP1115-FLTR). This filter is designed for use with the Simply Conserve AM-AP1115-WH air purifier. It features a 3-stage composite filtration system engineered to remove 99.97% of airborne contaminants down to 0.3 microns. Regular filter replacement ensures optimal performance of your air purifier.
Product Overview
The Simply Conserve 1000 Series replacement filter is a cylindrical unit comprising three distinct filtration layers:
- Pre-Filter: Captures larger particles such as dust, lint, fibers, hair, and pet fur.
- True HEPA H13 Filter: Traps microscopic contaminants including bacteria, viruses, pet dander, smoke, pollen, and other fine pollutants.
- Super Absorbent Carbon Filter: Eliminates airborne toxins, odors, smoke-smell, fumes, Volatile Organic Compounds (VOCs), cooking smells, and pet odors.
Image: The Simply Conserve 1000 Series 3-Stage Replacement Filter, showing its pleated structure.
Image: The Simply Conserve 1000 Series Tabletop Air Purifier shown alongside its replacement filter.
Setup and Installation
Follow these steps to replace the filter in your Simply Conserve 1000 Series Tabletop Air Purifier (AM-AP1115-WH):
- Power Off and Unplug: Before beginning, ensure the air purifier is turned off and unplugged from the power outlet.
- Access Filter Compartment: Carefully turn the air purifier upside down. Locate the filter compartment cover, typically at the base of the unit.
- Remove Cover: Twist the filter compartment cover counter-clockwise to unlock it, then lift it off.
- Remove Old Filter: Grasp the old filter and pull it gently upwards to remove it from the air purifier. Dispose of the used filter responsibly.
- Insert New Filter: Unpack the new Simply Conserve 1000 Series replacement filter. Insert the new filter into the air purifier, ensuring it is seated correctly and snugly. The filter should fit without excessive force.
- Replace Cover: Place the filter compartment cover back onto the base of the air purifier. Twist it clockwise until it locks securely into place.
- Restore Power and Reset: Turn the air purifier upright and plug it back into the power outlet. Refer to your air purifier's main instruction manual for specific steps on how to reset the filter replacement indicator light, if applicable.
Image: Top view of the replacement filter, showing the inner carbon layer.
Image: Bottom view of the replacement filter, showing the base structure.
Operating Principles
The 3-stage filtration system works synergistically to purify the air:
- Air first passes through the Pre-Filter, which acts as the initial barrier against larger airborne particles.
- Next, the air flows through the True HEPA H13 Filter, capturing fine particulate matter, allergens, and microorganisms.
- Finally, the Super Absorbent Carbon Filter neutralizes odors and harmful gases, releasing cleaner, fresher air into your environment.
This comprehensive filtration process contributes to improved indoor air quality.
Image: Diagram illustrating the three stages of the composite filter: Pre-Filter, True HEPA H13 Filter, and Super Absorbent Carbon Filter.
Maintenance
The Simply Conserve 1000 Series replacement filter has a rated life of 1,500 hours of operation. The actual lifespan may vary depending on air quality and usage frequency. It is recommended to replace the filter when the filter indicator light on your air purifier illuminates, or approximately every 2-3 months with continuous use.
This filter is not washable and should not be cleaned. Attempting to clean the filter may damage its structure and reduce its effectiveness. Always replace with a genuine Simply Conserve AM-AP1115-FLTR replacement filter to maintain optimal performance and warranty.
Troubleshooting
- Reduced Airflow: If you notice a decrease in airflow from your air purifier, the filter may be clogged. Check the filter indicator light and replace the filter if it has reached its end of life.
- Persistent Odors: If odors persist despite the air purifier running, the carbon filter may be saturated. Replace the filter.
- Filter Indicator Light Remains On After Replacement: Ensure the filter is installed correctly and the filter compartment cover is securely closed. Refer to your air purifier's manual for specific instructions on how to reset the filter life indicator. This often involves pressing and holding a button for a few seconds.
Specifications
| Brand | Simply Conserve |
| Model Number | AM-AP1115-FLTR |
| Compatible Air Purifier | Simply Conserve 1000 Series Tabletop Air Purifier (AM-AP1115-WH) |
| Material | Carbon Fiber |
| Product Dimensions (L x W x Th) | 8" x 8.2" x 8.2" |
| Air Filter Construction | Pleated, 3-Stage Composite |
| Filtration Efficiency | Removes 99.97% of contaminants down to 0.3 microns |
| Filter Life | 1,500 hours |
| CADR (Smoke) | 116 ft³/min |
| CADR (Dust) | 147 ft³/min |
| CADR (Pollen) | 164 ft³/min |
| CADR (PM2.5) | 131 ft³/min |
| UPC | 810105221589 |
Image: Product packaging displaying the CADR performance table and filter breakdown.
Warranty Information
This Simply Conserve replacement filter is covered by a 1 Year Limited Warranty. For detailed terms and conditions, please refer to the warranty documentation provided with your original Simply Conserve 1000 Series Tabletop Air Purifier or visit the official Simply Conserve website.
Customer Support
For further assistance, questions regarding your Simply Conserve 1000 Series Air Purifier or its replacement filter, or to purchase additional filters, please visit the Simply Conserve Store or contact Simply Conserve customer service directly.