CHGeek CB6005 15W Wireless Car Charger Phone Holder Mount User Manual

1. Introduction

Thank you for choosing the CHGeek CB6005 Wireless Car Charger Phone Holder Mount. This device is designed to provide a secure and convenient solution for holding and wirelessly charging your smartphone in your vehicle. It features intelligent auto-clamping, 15W fast charging capabilities, and versatile mounting options for your dashboard, windshield, or air vent.

Image: The CHGeek Wireless Car Charger Phone Holder Mount securely holding a smartphone in a car, demonstrating its use while driving.

2. What's in the Box

• Wireless Car Charger Unit
• Strong Suction Cup Mount
• Air Vent Clip
• USB C Power Cable
• User Manual

3. Product Features

• 15W Qi Fast Wireless Charger: Supports various charging speeds including 15W for LG V50/V40/V30+, 10W for Samsung Galaxy S24/Ultra/S23/S22 Ultra/S21/S20/Note 10+, 7.5W for iPhone 15/14/13/12 Pro Max/11/XS Max/XS, and 5W for other Qi-enabled phones.
• Intelligent Identification Auto Clamping: Automatically recognizes and secures your phone in 0.5 seconds upon placement, with a three-claw design for stable grip.
• Enhanced Suction Cups: Features super suction and viscous gel pads for secure attachment to dashboards, windshields, or other flat surfaces, maintaining strong suction even at high temperatures.
• 4-in-1 Car Phone Holder: Includes both a suction cup and an air vent clip for flexible installation on the windshield, dashboard, office table, or car air vent.

Image: Visual representation of the fast charging capabilities for various phone brands and compatible phone sizes.

4. Setup and Installation

4.1 General Assembly

1. Unscrew the nut on the back of the wireless charger unit.
2. Place the nut over the ball joint of your chosen mount (suction cup or air vent clip).
3. Insert the ball joint into the socket on the back of the wireless charger unit.
4. Tighten the nut securely to fix the charger unit to the mount.

4.2 Suction Cup Mount Installation (Dashboard/Windshield)

1. Choose a clean, flat surface on your dashboard or windshield. Ensure the surface is free of dust and debris.
2. Pull up the latch on the suction cup.
3. Remove the protective film from the suction cup.
4. Press the suction cup firmly onto the chosen surface.
5. Push down the latch to create a strong vacuum seal.
6. Adjust the arm and angle of the holder as desired using the adjustment knobs.

Image: The wireless car charger mounted on a car dashboard, holding a phone that is actively charging.

4.3 Air Vent Clip Installation

1. Attach the air vent clip to the wireless charger unit as described in Section 4.1.
2. Locate a suitable air vent in your vehicle.
3. Gently push the air vent clip onto one of the vent blades until it is securely fastened. The clip features a stable triangle structure for enhanced grip.
4. Ensure the holder is stable and does not obstruct airflow or vehicle controls.

Image: A detailed view of the stable air vent clip, illustrating its secure triangular locking design.

4.4 Power Connection

1. Connect the provided USB-C cable to the charging port on the bottom of the wireless car charger unit.
2. Plug the other end of the USB-C cable into a QC 3.0 car charger adapter (not included). A QC 3.0 adapter is required to enable fast charging mode.
3. Ensure the power supply is active. The LED indicator on the charger will illuminate.

Video: This video demonstrates the assembly and installation of the CHGeek wireless car charger, showing how to attach the phone holder to the mount and connect the power cable.

5. Operating Instructions

5.1 Placing Your Phone

1. With the charger powered on, the clamping arms will be open.
2. Gently place your smartphone into the holder. The intelligent sensor will detect the phone.
3. The clamping arms will automatically close and secure your phone.

5.2 Removing Your Phone

1. To remove your phone, press the release button located on the side of the charger unit.
2. The clamping arms will automatically open, allowing you to safely retrieve your phone.

5.3 Wireless Charging

Once your phone is securely placed in the holder and the charger is powered by a QC 3.0 adapter, wireless charging will begin automatically. The charger is designed to switch to a low-power trickle mode when your phone's battery level reaches 80% to protect battery life.

Image: An internal view of the charger's coil and chip, demonstrating its safe and fast charging capabilities with a battery charge graph.

Video: This video showcases the automatic clamping and wireless charging features of the CHGeek car charger, demonstrating how a phone is secured and begins charging upon placement.

6. Compatibility

The CHGeek CB6005 Wireless Car Charger is compatible with a wide range of Qi-enabled smartphones, including but not limited to:

• iPhone: 15 Pro Max, 15 Pro, 15 Plus, 15, 14 Pro Max, 14 Pro, 14 Plus, 14, 13, 13 Pro, 13 Pro Max, 13 Mini, 12, 12 Pro, 12 Pro Max, 12 Mini, 11, 11 Pro, 11 Pro Max, XS, XS MAX, X, XR, 8, 8 Plus.
• Samsung: S24 S23 Ultra, S22 Ultra, S22+, S22, S21 Ultra 5G, S21+, S21, S21 FE, S20, S10, S9, S9+, S8, S8+, S7, S7 Edge, S6 Edge Plus, Note 10 10+, Note 9, Note 8, Note 7, Note 5, Note FE, W2017(SM-W2017), Kelly(SM-W2018), [Galaxy] S Lite(SM-G8750).
• LG: G7 V30 V35 V40; G2, G3, G6, Lucid2(VS870), Optimus F5(AS870), Vu 3, Spectrum 2, Optimus G Pro, Optimus Vu II, Optimus LTE 2.
• Google: Pixel 7, Pixel 7 Pro, Pixel 6 Pro, Pixel 6.

7. Important Notes and Safety

• A QC 3.0 car charger adapter is required for fast charging (not included).
• The thickness of your phone case must be less than 0.16 inches (4mm) for optimal charging performance.
• This charger is not compatible with Otterbox cases due to their thickness.
• The charging function may not be suitable for phones with significantly protruding cameras, as the phone may not directly contact the charging board.
• The charger features an intelligent system that transitions to a slow charging mode when the phone reaches 80% battery to protect its lifespan.

Image: A warning illustrating that phones with protruding cameras may not charge correctly if they cannot make direct contact with the charging surface.

8. Maintenance

• To maintain the strong suction of the suction cup, rinse it with warm water and allow it to air dry. This will restore its adhesive properties.
• Keep the charging surface and clamping arms clean and free of dust or debris to ensure optimal performance.

9. Troubleshooting

• Charger not powering on: Ensure the USB-C cable is securely connected to both the charger unit and a functional QC 3.0 car charger adapter. Check the vehicle's power outlet.
• Phone not charging wirelessly: Verify that your phone is Qi-enabled. Ensure the phone case thickness is within the 0.16-inch limit and that there are no metal objects or cards between the phone and the charger. Confirm the charger is receiving power from a QC 3.0 adapter.
• Auto-clamping not working: Ensure the charger is powered on. The intelligent sensor requires power to operate the clamping mechanism.
• Mount is unstable/wobbling: For suction cup mounts, ensure the surface is clean, flat, and the latch is fully engaged. For air vent clips, ensure it is securely attached to a sturdy vent blade. Adjust the tightening knobs on the mount for maximum stability.

10. Specifications

11. Warranty and Support

The CHGeek CB6005 Wireless Car Charger comes with a 2-year warranty service. If you encounter any issues or have suggestions regarding this product, please do not hesitate to contact our customer service team.

Our professional customer service team is available 24 hours a day to provide high-quality support, including assistance with free returns and exchanges.

Contact Email: service@chgeekdirect.com

Image: Customer service representatives ready to provide timely and patient 24-hour support.