1. Product Overview
The CREWORKS B0D312RZSV Ultrasonic Cleaner Kit includes a 2L Professional Ultrasonic Cleaner Machine with Heater and Timer, and a 200ml Ultrasonic Retainer Cleaner Machine. These devices utilize ultrasonic cavitation to provide thorough and professional cleaning for a wide range of items, from delicate jewelry to household items and dental appliances. The cavitation effect generates microscopic bubbles that implode, creating a scrubbing action that effectively removes dirt, grime, tarnish, and other contaminants without harsh chemicals or radiation.
Figure 1: CREWORKS 2L Professional Ultrasonic Cleaner Machine.
Figure 2: Explanation of Powerful Ultrasonic Cavitation.
Figure 3: Visible Cleaning Effect on various items.
2. Components of the 2L Ultrasonic Cleaner
The 2L Professional Ultrasonic Cleaner Machine comes with the following components:
- Stainless Steel Tank (2L capacity)
- Stainless Steel Basket
- Lid
- Power Cord
- Drain Valve (located on the side)
Figure 4: 2L Ultrasonic Cleaner with its accessories.
3. Control Panel and Features (2L Cleaner)
The control panel, located on the front of the unit, features digital displays for temperature and time, along with buttons for adjustment and operation.
- Temperature Display: Shows both the set temperature and the actual temperature of the water. Temperature can be adjusted using the up/down arrows. The unit heats up once turned on.
- Time Display: Shows the set cleaning time. Time can be adjusted using the up/down arrows, typically in 15-minute increments, up to a maximum of 30 minutes.
- Heating On/Off Button: Controls the heating function. Note that the unit does not automatically turn off heating; it must be manually switched off.
- Oscillator On/Off Button: Activates or deactivates the ultrasonic cleaning function. The device will stop cleaning automatically once the set countdown time is reached.
Video 1: Demonstration of the CREWORKS 2L Ultrasonic Cleaner's control panel and operation.
4. Setup and Operation (2L Cleaner)
- Prepare the Unit: Remove the lid and the basket from the tank.
- Fill the Tank: Fill the tank with water and an appropriate cleaning solution (e.g., regular dish detergent for general cleaning, or a specialized ultrasonic cleaning fluid for enhanced cleaning). Ensure the water level does not exceed the maximum fill line indicated inside the tank.
- Place Items: Gently place the items to be cleaned into the basket. Ensure items are not overloaded and do not directly touch the bottom of the tank.
- Replace Lid: Carefully place the lid back onto the unit.
- Power On: Plug the power cord into an outlet and turn on the main power switch located at the back of the unit.
- Adjust Settings: Use the control panel to set the desired temperature and cleaning time according to the cleaning guidelines below.
- Start Cleaning: Press the oscillator button to begin the ultrasonic cleaning process.
- Monitor and Stop: The unit will automatically stop the ultrasonic cleaning when the timer counts down to zero. To stop heating, manually press the heating on/off button.
- Cool Down and Drain: Allow the water to cool down before draining. Use the drain valve on the side of the unit to easily empty the liquid into a sink or appropriate container.
5. Cleaning Guidelines (2L Cleaner)
Optimal cleaning results depend on the type of item and the level of dirt. Refer to the following guidelines:
- General Cleaning (Lightly Soiled Items): For items with light dirt or tarnish, use water with a regular detergent. Set the temperature to approximately 120°F (49°C).
- Enhanced Cleaning (Deeper Cleaning): For items requiring a more thorough clean, use a fluid specifically designed for ultrasonic cleaners. Set the temperature to approximately 140°F (60°C).
- Extensive Cleaning (Heavy Deposits): For items with rust, fuel residues, or hard carbon deposits, pre-soak the item before cleaning. Use a specialized ultrasonic cleaning fluid and set the temperature to the maximum of 176°F (80°C).
6. Mini Ultrasonic Retainer Cleaner (200ml)
The kit also includes a compact 200ml ultrasonic cleaner, ideal for delicate items like dental appliances and small jewelry. It features 24W ultrasonic power and operates at a 46 kHz frequency, ensuring gentle yet thorough cleaning. This mini cleaner also incorporates UVC cleaning for enhanced sanitization.
Figure 5: 200ml Mini Ultrasonic Cleaner with UVC Cleaning.
Figure 6: UVC Lights for Revitalized Oral Health in the 200ml cleaner.
Figure 7: Versatile Use of the 200ml Mini Ultrasonic Cleaner.
7. Maintenance
To ensure the longevity and optimal performance of your ultrasonic cleaner, follow these maintenance tips:
- Always turn off the power and allow the water to cool before draining or handling the unit.
- Regularly clean the tank and basket after each use to prevent residue buildup.
- Store the unit in a dry, cool place when not in use.
- Do not use abrasive cleaners or harsh chemicals on the exterior of the unit.
8. Troubleshooting
If you encounter any issues with your CREWORKS Ultrasonic Cleaner, consider the following:
- Unit Not Powering On: Ensure the power cord is securely plugged into both the unit and a working electrical outlet. Check the main power switch at the back of the unit.
- No Ultrasonic Action: Verify that the oscillator button has been pressed to activate the cleaning function.
- Insufficient Cleaning: Adjust the temperature and cleaning time according to the cleaning guidelines. Ensure the correct cleaning solution is used for the type of item and level of dirt. Avoid overloading the basket.
- Noise During Operation: A slight buzzing sound is normal during ultrasonic operation. If the noise is excessive, ensure the unit is on a stable surface and items in the basket are not directly touching the tank walls.
For further assistance, please contact CREWORKS customer support.
9. Specifications
- Model: B0D312RZSV
- Brand: CREWORKS
- 2L Cleaner Capacity: 2 Liters (approx. 0.5 Gallons)
- 2L Cleaner Ultrasonic Power: 60W
- 2L Cleaner Heating Power: Up to 50W
- 200ml Cleaner Capacity: 200 mL (approx. 6.7 fl. oz.)
- 200ml Cleaner Ultrasonic Power: 24W
- 200ml Cleaner Ultrasonic Frequency: 46 kHz
- 200ml Cleaner Additional Feature: UVC Cleaning
- Date First Available: April 30, 2024
10. Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the documentation included with your purchase or visit the official CREWORKS website. Contact details for customer service are typically provided in the product packaging or on the manufacturer's website.
