Advwin Black LED Gaming Desk User Manual

Introduction

Thank you for purchasing the Advwin Black LED Gaming Desk. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your new gaming desk. Please read this manual thoroughly before assembly and use, and keep it for future reference.

Important Safety Information

• Ensure all parts are present and undamaged before assembly. Do not proceed with assembly if any parts are missing or damaged.
• Assemble the desk on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly, as this may damage the material.
• Keep small parts and packaging materials away from children and pets to prevent choking hazards.
• Do not exceed the maximum load capacity of 80kg (176 lbs) to prevent damage or injury.
• Ensure the desk is placed on a stable, level surface to prevent tipping.
• Keep electrical components (LED lights, power cables) away from water and moisture.

Package Contents

Please verify that all the following components are included in your package:

• 1 x Advwin Gaming Desk (Desktop and Frame Components)
• 1 x Manual Instruction
• 1 x RGB LED Strip with Remote Control
• Assembly Hardware (Screws, Allen Key, etc.)
• Adjustable Headphone Hook
• Cup Holder

Setup and Assembly Instructions

Follow these steps carefully to assemble your Advwin Gaming Desk. It is recommended to have two people for assembly.

Step 1: Unpack and Identify Parts

Carefully unpack all components and lay them out on a clean, soft surface. Refer to the included parts list in your manual to identify each piece.

Figure 1: Overview of desk dimensions (120cm x 60cm x 72.5cm) and maximum load capacity (80kg).

Step 2: Assemble the Frame

Attach the desk legs to the main support beams using the provided screws. Ensure all connections are secure but do not fully tighten until the entire frame is assembled.

Figure 2: Illustration of the desk's durable steel frame and stable support structure.

Step 3: Attach the Desktop

Carefully place the carbon fiber desktop onto the assembled frame. Align the pre-drilled holes on the desktop with the holes on the frame. Secure the desktop using the appropriate screws. Once the desktop is in place, fully tighten all screws on the frame and desktop.

Figure 3: Detail of the carbon fiber textured desktop surface, designed for a comfortable gaming experience.

Step 4: Install Accessories

Attach the adjustable headphone hook and cup holder to the desired locations on the desk. The desk also features adjustable feet to ensure stability on uneven surfaces.

Figure 4: Close-up view of the earphone hook, cup holder, and adjustable foot for enhanced usability.

Step 5: Connect LED Lighting

Carefully attach the RGB LED strip to the designated areas on the desk. Connect the LED strip to the power source as instructed in the separate LED light manual (if provided) or directly to a USB port/power adapter. Ensure all connections are secure.

Operating Instructions

RGB LED Lighting System

The Advwin Gaming Desk features a built-in 6-color RGB LED strip with 358 lighting modes. The lighting system is controlled via the included remote control.

Figure 5: The desk illuminated by RGB LED lights, showing the remote control for customization.

• Power On/Off: Press the power button on the remote to turn the lights on or off.
• Color Selection: Use the color buttons on the remote to select one of the 6 available colors.
• Mode Selection: Cycle through the 358 lighting modes using the "MODE" or arrow buttons.
• Brightness Adjustment: Use the brightness up/down buttons to adjust the intensity of the lights.
• Speed Adjustment: For dynamic modes, use the speed up/down buttons to control the transition speed.

Ensure the remote control has working batteries and is pointed towards the LED receiver for optimal functionality.

Maintenance

• Cleaning: Wipe the desk surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the carbon fiber finish.
• Dusting: Regularly dust the desk and LED strip to maintain optimal appearance and light performance.
• Tightening Screws: Periodically check all screws and connections to ensure they remain tight and secure. Retighten if necessary to maintain desk stability.
• LED Care: Do not bend or forcefully pull the LED strip. If the remote control stops working, check and replace its batteries.

Troubleshooting

Specifications

Warranty and Support

Advwin products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Advwin website.

If you encounter any issues during assembly or operation, or if you have questions about your product, please contact Advwin customer service for assistance. Our team is committed to providing professional and friendly after-sales service.

Contact Information:

• Brand: ADVWIN
• Website: Visit the ADVWIN Store on Amazon
• Customer Service: Refer to your purchase documentation for specific contact details.