Best Choice Products 3-Piece Mid-Century Modern Round Dining Set (Model: SKY7313) Instruction Manual

Introduction

Thank you for choosing the Best Choice Products 3-Piece Mid-Century Modern Round Dining Set. This set is designed to provide a functional and stylish dining solution for small spaces, kitchens, dinettes, or breakfast nooks. It features a round table and two chairs with a mid-century modern aesthetic, combining engineered wood panels with sturdy metal legs. This manual provides detailed instructions for safe assembly, proper use, and maintenance to ensure the longevity of your dining set.

Image: The Best Choice Products 3-Piece Mid-Century Modern Round Dining Set, featuring a grey round table and two matching chairs with black metal legs, placed in a contemporary room.

Safety Information

Please read and understand all safety warnings and instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Always assemble according to the provided instructions.
• Do not exceed the weight capacity of the tabletop (220 lbs) and chairs (275 lbs each).
• Keep the area around the dining set clear to prevent tip-over risks.
• Keep small children and pets away from the dining set during assembly and use.
• Ensure all connections are secure and tightened before use. Periodically check and re-tighten fasteners.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Round Tabletop (1)
• Table Legs (4)
• Chair Seats (2)
• Chair Backrests (2)
• Chair Frames/Legs (2 sets)
• Assembly Hardware (screws, washers, Allen wrench, etc.)

Setup and Assembly Instructions

Assembly typically requires two adults and approximately 25-45 minutes. Ensure you have adequate space and a soft, clean surface to prevent scratching components during assembly.

Tools Required (Not Included):

• Phillips Head Screwdriver

Table Assembly:

1. Carefully unbox all components and lay them out on a soft, clean surface. Identify the tabletop and the four table legs.
2. Attach each table leg to the underside of the tabletop using the provided screws and an Allen wrench. Ensure the legs are securely fastened but do not overtighten initially.
3. Once all legs are attached, gently flip the table upright. Check for stability and tighten all screws completely.

Chair Assembly:

1. Identify the chair seats, backrests, and metal chair frames.
2. Attach the chair seat to the main chair frame using the designated screws. Ensure the seat is oriented correctly.
3. Connect the backrest to the chair frame. Align the holes carefully and secure with screws.
4. Repeat for the second chair.
5. After assembling both chairs, place them on a flat surface. If they wobble, loosen the screws slightly, apply pressure to level the chair, and then re-tighten all screws. This helps ensure even weight distribution and stability.

Image: A diagram illustrating the dimensions of the round dining table (31.5" diameter, 30" height) and a chair (19.25" L x 19.75" W x 33.5" H).

Operating Instructions

This dining set is designed for indoor use in kitchens, dining rooms, or small living areas. It comfortably accommodates two individuals.

• Placement: Position the dining set on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent material degradation.
• Weight Capacity: The table has a maximum weight capacity of 220 lbs. Each chair has a maximum weight capacity of 275 lbs. Do not exceed these limits.
• Space Saving: The chairs are designed to tuck neatly under the 31.5-inch round tabletop when not in use, optimizing space in smaller rooms.

Image: The dining set with chairs neatly tucked under the table, demonstrating its space-saving design in a living area.

Image: Two individuals seated comfortably at the Best Choice Products dining set, enjoying a meal, highlighting its suitability for two people.

Maintenance

Proper care will help maintain the appearance and extend the life of your dining set.

• Cleaning: Wipe surfaces with a dry cloth. For spills, use a slightly damp cloth immediately and then dry thoroughly. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Inspection: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Protection: Use coasters or placemats to protect the tabletop from hot items, spills, and scratches.

Image: A close-up view of the dining table and chair, showcasing the engineered wood tabletop and sturdy metal legs, emphasizing the quality construction.

Troubleshooting

Specifications

Customer Support

For assistance with assembly, missing parts, or any other inquiries regarding your Best Choice Products dining set, please contact our customer support team. Refer to the product model number (SKY7313) when contacting support to expedite assistance.

Visit the Best Choice Products Store on Amazon for more information or to find contact details.