BLANCO 527561 Alta II Low Arc Pull-Out Kitchen Faucet User Manual

1. Product Overview

The BLANCO Alta II Low Arc Pull-Out Kitchen Faucet, model 527561, in Satin Gold finish, is designed for modern kitchen environments. This faucet combines ergonomic design with practical features for daily use, offering both aesthetic appeal and functional efficiency.

Key Features:

• Ergonomic Pull-Out Hand Spray: Designed for comfortable grip and smooth operation, extending reach for various tasks.
• Dual-Spray Toggle: Easily switch between a powerful spray for vigorous cleaning and a gentle stream for delicate rinsing.
• 140° Swivel Spout: Provides an optimal extended range of motion, enhancing flexibility and convenience in the sink area.
• Durable Construction: Crafted from solid brass with a premium PVD metal finish, ensuring resistance to tarnishing and corrosion for long-lasting performance.
• Complete Installation Kit: Includes all necessary parts for a straightforward and stress-free setup.

2. Safety Information

Please read all instructions carefully before installation and use to ensure safe operation and prevent damage. Retain this manual for future reference.

• Always turn off the main water supply before beginning any installation or maintenance.
• Wear appropriate personal protective equipment, such as safety glasses, during installation.
• Ensure all connections are secure and watertight to prevent leaks.
• Do not overtighten connections, as this can damage the faucet or plumbing.
• If you are unsure about any part of the installation process, consult a qualified plumber.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).

3. Package Contents

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact BLANCO customer service.

• Faucet Body with Pull-Out Spray
• Handle
• Installation Hardware (mounting nut, washers, hot/cold supply lines)
• Instruction Manual

4. Installation Instructions

4.1 Before You Begin

• Tools Required: Adjustable wrench, Phillips screwdriver, plumber's putty or silicone sealant, flashlight, bucket, safety glasses.
• Check Local Codes: Ensure your installation complies with all local plumbing and building codes.
• Clear Workspace: Ensure the area under the sink is clear and accessible.
• Turn Off Water Supply: Locate and turn off the hot and cold water supply valves under the sink, or the main water supply to your home.
• Remove Old Faucet: If replacing an existing faucet, follow the manufacturer's instructions for removal.

4.2 Step-by-Step Installation

1. Prepare the Faucet: Unpack the new faucet and inspect all components. Ensure the O-ring is properly seated in the base of the faucet.
2. Install Faucet into Sink Hole: Insert the faucet body through the mounting hole in the sink or countertop. Ensure the faucet is oriented correctly.
3. Secure Faucet from Below: From underneath the sink, slide the rubber washer, metal washer, and mounting nut onto the threaded shank of the faucet. Hand-tighten the mounting nut, then use an adjustable wrench to firmly secure the faucet, ensuring it is straight and stable.
4. Connect Water Supply Lines: Connect the hot and cold water supply lines from the faucet to the corresponding shut-off valves. Use an adjustable wrench to tighten connections, but do not overtighten.
5. Connect Spray Hose: Attach the pull-out spray hose to the quick-connect fitting or threaded connection under the faucet body. Ensure a secure connection.
6. Install Weight (if applicable): Attach the hose weight to the pull-out spray hose at the indicated position (usually 6-8 inches from the bottom of the loop) to ensure the spray head retracts smoothly.
7. Test for Leaks: Slowly turn on the hot and cold water supply valves. Check all connections for leaks. Run the faucet for a few minutes, checking for any drips or leaks.

5. Operation

5.1 Water Flow and Temperature Control

The single lever handle controls both water flow and temperature. Lift the handle to increase water flow. Move the handle left for hot water and right for cold water. The 140° swivel spout allows for flexible positioning over the sink.

5.2 Pull-Out Spray Function

To use the pull-out spray, simply grasp the spray head and pull it away from the spout. The hose will extend, providing greater reach. The spray head features a dual-spray toggle button. Press the button to switch between a steady stream and a powerful spray. When finished, guide the spray head back into the spout, and the hose weight will assist in smooth retraction.

6. Maintenance and Care

Proper care will ensure the longevity and appearance of your BLANCO faucet.

6.1 Cleaning the Faucet

• Clean the faucet regularly with a soft cloth and mild soap and water.
• Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the Satin Gold finish.
• Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.

6.2 Aerator Maintenance

If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the tip of the spray head, clean any debris or mineral deposits, and rinse thoroughly before reattaching.

7. Troubleshooting

Refer to the table below for common issues and their solutions.

8. Specifications

Detailed technical specifications for the BLANCO 527561 Alta II Faucet.

9. Warranty and Support

9.1 Warranty Information

This BLANCO faucet is covered by a limited warranty. Please refer to the warranty card included with your product or visit the official BLANCO website for specific terms and conditions regarding coverage and duration.

9.2 Customer Support

For technical assistance, replacement parts, or warranty claims, please contact BLANCO customer service. Contact information can typically be found on the BLANCO website or on your purchase documentation.

BLANCO Official Website: www.blancoamerica.com