SatelliteSale UR3-SR3S Universal Remote Control Instruction Manual

Introduction

This manual provides comprehensive instructions for the SatelliteSale UR3-SR3S Universal Remote Control. This remote is designed to control up to three devices: a Cable Set-top Box, a Television, and a DVD player. It features large, easy-to-read, glow-in-the-dark buttons for enhanced usability.

Setup and Programming

1. Battery Installation

The SatelliteSale UR3-SR3S remote requires two AAA batteries (included). To install the batteries:

1. Open the battery compartment cover located on the back of the remote control.
2. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
3. Replace the battery compartment cover until it clicks securely into place.

Image: Rear view of the SatelliteSale UR3-SR3S remote control, showing the open battery compartment and two AAA batteries ready for insertion. This illustrates the correct orientation for battery placement.

2. Programming Your Remote

The UR3-SR3S remote can be programmed using several methods to control your Cable Box, TV, and DVD player. Choose the method that best suits your needs.

Image: A banner titled 'Programming Your Remote' highlighting various programming methods including Auto-Search, Three-Digit Code, Quick Setup, and Factory Reset.

2.1. Auto-Search Method

This method automatically searches for the correct code for your device.

Image: Visual guide for the auto-search programming method, detailing four steps with corresponding icons.

1. Turn on the equipment you want to program (Cable Box, TV, or DVD).
2. Press the device button (i.e., CBL, TV, or DVD button) and the OK/SEL button simultaneously for 3 seconds. The device LED will turn on for 20 seconds. While the LED is on, press the CH+ or CH- button one at a time or keep it pressed. The remote will give off a series of power ON/OFF code signals. Release the CH+ or CH- button as soon as the equipment turns off.
3. To make sure you've entered the correct code, press the MUTE button. The device will turn on or off.
4. Press the same device button (i.e., CBL, TV, or DVD button) to store the code. The device LED will blink twice.

2.2. Three-Digit Code Method

This method requires you to enter a specific three-digit code for your device brand. Refer to the code list provided with your remote or contact customer support for a list of codes.

Image: Visual guide for the three-digit code programming method, detailing five steps with corresponding icons.

1. Turn on the device you want to program (i.e., Cable Box, TV, and DVD).
2. Press the device button and the OK/SEL button simultaneously for three seconds. The device LED will turn on for 20 seconds. Point the remote toward the equipment and enter the three-digit code assigned to your brand while the LED is on.
3. To make sure you've entered the correct code, press the MUTE button. The device should turn off.
4. To store the three-digit code, press the device button once. The device LED will blink twice.
5. Test out the remote buttons (MUTE, VOLUME, etc.). If the buttons don't work as they should, repeat step #2 using the next three-digit code from the brand list.

2.3. Quick Setup Method

This method offers a simplified approach for programming your TV.

Image: Visual guide for the quick setup programming method, detailing four steps with corresponding icons.

1. Turn on the device (i.e., TV) you want to program.
2. Press and hold the device button (CBL, TV or DVD button) for five seconds until the LED blinks once and stays on. Continue to hold the device button and enter the code for your brand. The device LED will blink twice.
3. Point the remote at the device.
4. Press the device button. If it turns off, you're all set. If not, then try another code assigned to your brand, or try another method.

2.4. Factory Reset

If you need to clear all programmed settings and return the remote to its original factory state, follow these steps:

Image: Visual guide for performing a factory reset, detailing two steps with corresponding icons.

1. Press and hold the CBL + REC buttons simultaneously until the remote lights move from right to left three times. (This should take approximately 10 seconds).
2. The remote should now be reset.

Operating Your Remote Control

The SatelliteSale UR3-SR3S remote is designed for intuitive operation with clearly labeled, large buttons. Below is an overview of key functions.

Image: Front view of the SatelliteSale UR3-SR3S universal remote control, showcasing its large, glow-in-the-dark buttons and ergonomic design.

Button Functions Overview

• Device Buttons (TV, DVD, CBL): Select the device you wish to control. Press the corresponding button to switch modes.
• GUIDE: Access the program guide for your cable box.
• MENU/SETTINGS: Open the menu or settings for the selected device.
• INFO: Display information about the current program or selection.
• EXIT: Exit menus or program guides.
• LIST: Access recorded programs (DVR functionality).
• OK/SEL (Select): Confirm selections or enter menus.
• Directional Arrows (Up, Down, Left, Right): Navigate through menus and program guides.
• PAGE +/-: Scroll through pages in guides or lists.
• A, B, C, D Buttons: Multi-functional buttons, often used for specific features within menus or interactive services.
• REW (Rewind), PLAY, FF (Fast Forward), REC (Record), STOP, PAUSE: Control media playback and recording functions.
• ON Demand: Access On Demand content from your cable provider.
• VOL +/- (Volume Up/Down): Adjust the volume.
• MUTE: Mute or unmute audio.
• CH +/- (Channel Up/Down): Change channels.
• LAST: Return to the previously viewed channel.
• Numeric Keypad (0-9): Directly enter channel numbers or codes. These keys are glow-in-the-dark for visibility.
• FAV (Favorite): Access favorite channels.
• Macro Buttons: The UR3-SR3S series features custom programmable Macro buttons that can be used to store favorite channels or sequences of commands.

Maintenance

Battery Replacement

Replace batteries when the remote's response becomes sluggish or the LED indicator does not light up during button presses. Refer to the 'Battery Installation' section for instructions.

Cleaning

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the remote's surface or internal components.

Troubleshooting

• Remote is not responding:
  • Ensure fresh batteries are correctly installed.
  • Check for any obstructions between the remote and the device.
  • Make sure you are pointing the remote directly at the device's sensor.
  • Verify that the correct device button (TV, DVD, or CBL) is selected.
• Remote does not program correctly:
  • Re-attempt the programming steps carefully, ensuring all timing and button presses are accurate.
  • If using the Three-Digit Code Method, try the next code listed for your brand.
  • Try a different programming method (Auto-Search or Quick Setup).
  • Ensure the device you are trying to program is turned on during the programming process.
• Only some functions work after programming:
  • This may indicate a partial code match. Try re-programming using a different code for your device.
  • Ensure the remote is in the correct device mode (TV, DVD, or CBL) for the function you are trying to use.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official SatelliteSale website. You may also contact SatelliteSale customer service directly for assistance with programming or troubleshooting.