Introduction
Thank you for choosing the VASAGLE Adjustable Dressing Chair, model LJB100W01. This manual provides essential information for the safe assembly, proper operation, and effective maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.
Product Features
The VASAGLE LJB100W01 chair is designed with user comfort and style in mind:
- Comfortable Seating: Features a spacious seat, soft fleece upholstery, and a 5.5 cm thick, well-padded seat cushion for a comfortable sitting experience.
- Supportive Backrest: A 50 cm wide backrest provides optimal support.
- Stylish Design: The cream white fleece front and coordinated PU back offer a unique and elegant look.
- Adjustable Height: Easily adjust the seat height to your preference.
- 360° Swivel: Enjoy full rotational movement for convenience.
- High Stability: Equipped with a robust 45 cm diameter base and a high-quality gas pressure cylinder for reliable support.
Figure 1: Comfort and design details of the chair. This image highlights the plush fabric, the ergonomic backrest, and the overall comfortable design of the seat.
Safety Information
- Maximum Weight Capacity: Do not exceed the maximum weight of 110 kg (242 lbs). Exceeding this limit may cause damage to the chair or personal injury.
- Stability: Ensure the chair is stable on a flat, even surface before sitting. Avoid leaning excessively to one side.
- Assembly: Follow all assembly instructions carefully. Ensure all screws are tightened securely before use.
- Children: Keep children away from the chair during assembly. Do not allow children to play on or with the chair unsupervised.
Parts List
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Seat with backrest (1)
- Gas lift cylinder (1)
- Base (1)
- Screws (4)
- Cushion (1) - already attached to seat
Figure 2: Dimensions of the VASAGLE LJB100W01 Adjustable Dressing Chair. This diagram illustrates the overall height (66.5-78.5 cm), seat width (50 cm), seat depth (42 cm), and base diameter (45 cm).
Setup and Assembly
Assembly of the VASAGLE LJB100W01 chair is straightforward. Please follow these steps:
- Carefully unpack all components and ensure they are free from damage.
- Place the base on a flat, stable surface.
- Insert the gas lift cylinder into the central hole of the base.
- Align the seat assembly with the top of the gas lift cylinder.
- Connect the seat to the gas lift cylinder and base using the provided 4 screws. Tighten all screws securely.
- Once assembled, test the chair's stability and functionality before regular use.
Figure 3: The fully assembled VASAGLE LJB100W01 chair, ready for use. This image shows the chair's aesthetic and how it fits into a typical dressing room or office setting.
Operating Instructions
Your VASAGLE LJB100W01 chair is designed for comfort and versatility.
- Height Adjustment: To adjust the seat height, locate the lever under the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at your desired height.
- Swivel Function: The chair features a 360° swivel function, allowing for easy rotation without moving the base.
Figure 4: Proper usage and stability. This image illustrates a user sitting comfortably and correctly on the chair, emphasizing the importance of the 45 cm diameter base for stability. It also contrasts with an unstable chair base.
Maintenance and Care
Proper care will extend the life and appearance of your chair.
- Cushion Cover Cleaning: The removable cushion cover should be hand washed only. Do not machine wash, bleach, tumble dry, iron, or dry clean.
- General Cleaning: For the chair frame and non-fabric parts, wipe with a soft, damp cloth. Avoid abrasive cleaners.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Figure 5: Detail of the chair's fabric and construction. This close-up shows the soft fleece material of the seat and the coordinated PU leather back, illustrating the quality of materials that require specific care.
Troubleshooting
This section addresses common issues you might encounter with your chair.
- Chair feels wobbly: Ensure all assembly screws are securely tightened. Check that the chair is on a flat, even surface.
- Height adjustment not working: Verify that the gas lift cylinder is correctly installed and not obstructed. Ensure the lever mechanism is functioning freely.
- Squeaking noises: Apply a small amount of silicone lubricant to moving parts, such as the gas lift cylinder or swivel mechanism, if necessary.
If you experience issues not covered here, please contact customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | LJB100W01 |
| Brand | VASAGLE |
| Color | Cream White |
| Material | Fleece (Seat), Alloy Steel (Frame), Polyester (Fill) |
| Item Dimensions (LxWxH) | 51.5 x 50 x 78.5 Centimeters (Max Height) |
| Adjustable Height Range | 66.5 - 78.5 cm (approximate) |
| Chair Backrest Width | 50 Centimetres |
| Maximum Weight Recommendation | 110 Kilograms |
| Special Features | Adjustable Height, Swivel, Removable Cushion Cover |
| Leg Style | Sled Base |
| Net Quantity | 1.0 Count |
| Item Weight | 6.8 Kilograms |
Warranty and Support
Specific warranty information for the VASAGLE LJB100W01 chair is not provided in the product details. For warranty claims or technical support, please refer to the retailer where the product was purchased or visit the official VASAGLE website for customer service contact information.
