Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your VASAGLE 5-Tier Wooden Blanket Ladder, model ULLS022W01. Please read these instructions carefully before assembly and use to ensure safe and correct operation of the product. Keep this manual for future reference.
Safety Information
Important Safety Warnings:
- Always attach the ladder to the wall using the included anti-tip kit to prevent accidental tipping.
- Do not exceed the maximum weight capacity of each rung or the bottom bag to prevent accidents and damage to the product.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Keep small parts away from children during assembly to avoid choking hazards.
- Place the ladder on a flat, stable surface.

Image: Anti-tip strap for securing the ladder to the wall.
Package Contents
Before beginning assembly, ensure all parts listed below are present and undamaged:
- 1 x Blanket Ladder (pre-assembled frames)
- 1 x Accessory Kit (containing screws, knobs, hooks, etc.)
- 1 x Anti-Tip Kit
- 1 x Instructions Manual
Setup and Assembly
The VASAGLE Blanket Ladder is designed for quick and easy assembly. With pre-assembled frames and clear instructions, setup can be completed in approximately 10 minutes.
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all components from the 'Package Contents' section are present.
- Connect Frames: The main ladder frames are pre-assembled. Align the connecting points of the two ladder sections.
- Secure Rungs/Knobs: Insert the provided knobs into the designated holes on the side frames and twist to secure the ladder rungs. Ensure they are tightened firmly but do not overtighten to avoid damaging the wood.

Image: Illustration of the pre-assembled frame sections.

Image: Securing a rung with a knob.
- Attach Hooks and Bag: Attach the metal hooks with synthetic leather straps to the top rung as desired. Install the side hooks into the pre-drilled holes on the side frames. The synthetic leather bag can be attached to the lower rungs.
- Install Anti-Tip Kit: Position the ladder against the wall in your desired location. Use the provided anti-tip kit to securely fasten the top of the ladder to the wall. This is a critical safety step.
- Final Check: Ensure all connections are secure and the ladder is stable before placing any items on it.

Image: Example of clear assembly instructions provided.
Operating Instructions
The VASAGLE Blanket Ladder is designed for versatile storage and display in various rooms.
Usage Guidelines:
- Blankets and Towels: Drape blankets, quilts, or towels over the rungs. Distribute weight evenly across the rungs.
- Decorative Items: The rungs can also be used to display lightweight decorative items.
- Metal Hooks: Use the three robust metal hooks with synthetic leather straps at the top for hanging scarves, bags, or other accessories.
- Side Hooks: The eight additional side hooks provide extra hanging space for smaller items like keys, jewelry, or light garments.
- Bottom Bag: The synthetic leather bag at the bottom is suitable for storing magazines, books, or other small items.

Image: Blanket ladder in use, displaying blankets and storage bag.

Image: Detail of the metal hook for hanging items.
Maintenance
Proper care will ensure the longevity and appearance of your blanket ladder.
- Cleaning: Wipe the wooden surfaces with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
- Felt Pads: The ladder is equipped with thick felt pads on the top and bottom to protect your wall and floor from scratches. Periodically check these pads for wear and replace if necessary.
- Fastener Check: Regularly inspect all screws and connections to ensure they remain tight. Re-tighten any loose fasteners to maintain stability.

Image: Felt pad on the bottom of the ladder leg.

Image: Felt pad on the top of the ladder leg.
Troubleshooting
If you encounter any issues with your blanket ladder, refer to the following common solutions:
- Ladder feels unstable: Ensure all assembly screws and knobs are fully tightened. Verify the anti-tip kit is correctly installed and secured to a sturdy wall. The ladder should be placed on a level surface.
- Items sliding off rungs: Ensure items are draped securely. Avoid overloading rungs beyond their weight capacity.
- Missing parts: Double-check the packaging and compare with the 'Package Contents' list. If parts are genuinely missing, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | ULLS022W01 |
| Dimensions (D x W x H) | 2.8" x 21.6" x 65" (7 cm x 54 cm x 165 cm) |
| Material | Pine Wood, Synthetic Leather, Steel |
| Number of Rungs | 5 |
| Weight Capacity | 99 lbs (45 kg) total; individual rung/hook capacities vary. |
| Item Weight | 8.3 lbs (3.76 kg) |
| Color | Cream White |
| Assembly Required | Yes (approx. 10 minutes) |

Image: Product dimensions diagram.

Image: Material comparison (Solid Wood vs. Particleboard).
Warranty and Support
Specific warranty information and direct customer support contact details are not available in the provided product data. For warranty claims or technical assistance, please refer to the retailer's return policy or contact the seller directly through your purchase platform.





