Picun G1 Wireless Gaming Headset User Manual

1. Introduction

Thank you for choosing the Picun G1 Wireless Gaming Headset. This manual provides essential information for setting up, operating, and maintaining your headset. Please read it thoroughly to ensure optimal performance and longevity of your device.

Picun G1 Wireless Gaming Headset in Pale Purple

Figure 1: Picun G1 Wireless Gaming Headset

2. Package Contents

Ensure all items are present in the package:

1x Picun G1 Gaming Headset
1x USB Transmitter (2.4GHz Wireless Dongle)
1x USB-C Charging Cable
1x 3.5mm Audio Cable
1x Detachable Noise-Cancelling Microphone
1x User Manual

Picun G1 Wireless Gaming Headset and included accessories

Figure 2: Headset and Accessories

3. Product Overview

3.1 Headset Components

Adjustable Headband: For a comfortable fit.
Soft Memory Earmuffs: Designed for extended wear comfort.
40mm Dynamic Drivers: For immersive 3D spatial audio.
Detachable Microphone: Noise-cancelling for clear communication.
Control Buttons: Power, Volume Up/Down, Mute.
USB-C Charging Port: For recharging the internal battery.
3.5mm Audio Jack: For wired connectivity.
Indicator Light: Displays power and connection status.

Diagram showing the control buttons and ports on the Picun G1 headset

Figure 3: Headset Controls and Ports

4. Setup and Connectivity

4.1 2.4GHz Wireless Connection (for PC, PS4, PS5, Nintendo Switch)

Insert the USB Transmitter into an available USB port on your device (PC, PS4, PS5, Nintendo Switch).
Power on the headset by pressing and holding the Power button until the indicator light illuminates.
The headset will automatically attempt to pair with the USB Transmitter. A solid indicator light typically signifies a successful connection.
Adjust audio settings on your device to ensure the Picun G1 is selected as the input and output audio device.

Diagram illustrating 2.4GHz wireless connection of Picun G1 headset to various devices

Figure 4: 2.4GHz Wireless Setup

4.2 Bluetooth 5.4 Connection (for Mobile Phones, Tablets, Other Bluetooth-enabled Devices)

Ensure the headset is powered off.
Press and hold the Power button for approximately 5 seconds until the indicator light flashes rapidly, indicating pairing mode.
On your mobile device, enable Bluetooth and search for available devices. Select "Picun G1" from the list.
Once connected, the indicator light on the headset will become solid.

4.3 Wired Connection (using 3.5mm Audio Cable)

Connect one end of the 3.5mm audio cable to the headset's 3.5mm audio jack.
Connect the other end of the 3.5mm audio cable to the audio output port of your device.
The headset will function in wired mode, even if the battery is depleted.

5. Operating Instructions

5.1 Power On/Off

Power On: Press and hold the Power button for 2-3 seconds.
Power Off: Press and hold the Power button for 3-4 seconds.

5.2 Volume Control

Volume Up: Press the '+' button.
Volume Down: Press the '-' button.

5.3 Microphone Usage

Attach Microphone: Insert the detachable microphone into the dedicated port on the headset. Ensure it is twisted to align with the groove and pushed up firmly for a secure connection.
Mute/Unmute: Press the Mute button on the headset to toggle microphone mute status.

5.4 Charging

Connect the USB-C charging cable to the headset's charging port and a power source.
The indicator light will show charging status (e.g., red for charging, off/blue for fully charged).
A full charge typically takes 1-2 hours.
The headset offers up to 30 hours of gaming time and up to 50 hours in Bluetooth mode on a single charge.

Diagram showing the Picun G1 headset with a large battery icon, indicating 30 hours of battery life and 1-2 hours charging time

Figure 5: Battery Life and Charging

6. Maintenance

Clean the headset regularly with a soft, dry cloth.
Avoid exposing the headset to extreme temperatures, humidity, or direct sunlight.
Do not attempt to disassemble or repair the headset yourself, as this may void the warranty.
Store the headset in a safe place when not in use to prevent damage.

7. Troubleshooting

Problem	Possible Solution
No sound from headset	Ensure headset is powered on and charged. Verify correct connection method (2.4GHz dongle, Bluetooth, or 3.5mm cable). Check device's audio output settings to ensure Picun G1 is selected. Increase headset and device volume.
Microphone not working	Ensure microphone is securely attached and not muted. Check device's audio input settings to ensure Picun G1 microphone is selected. Some devices (e.g., Nintendo Switch) may have invalid microphone support via certain connections.
Headset not pairing	Ensure headset is in pairing mode (flashing indicator light for Bluetooth). For 2.4GHz, ensure the USB dongle is properly inserted. Move closer to the device to reduce interference. Restart both the headset and the connecting device.
Short battery life	Ensure headset is fully charged (1-2 hours). High volume levels can reduce battery life.

8. Specifications

Feature	Detail
Model Name	G1
Connectivity Technology	2.4GHz Wireless, Bluetooth 5.4, 3.5mm Wired
Audio Driver Size	40mm Dynamic Driver
Noise Control	Sound Isolation, ENC Noise Reduction (Microphone)
Frequency Response	20-40000 Hz
Sensitivity	121 dB
Impedance	32 Ohms
Bluetooth Version	5.4
Audio Latency	15 Milliseconds
Battery Life	Up to 30 hours (Gaming), Up to 50 hours (Bluetooth)
Charging Time	1-2 Hours
Weight	14 ounces (approx. 220g)
Compatible Devices	PS5, PS4, PC, Mac, Laptop, Desktop, Phone, Pad, Tablet, Nintendo Switch (invalid microphone), Other Bluetooth Enabled Devices (Excludes Xbox)
Material	ABS, Leather, Plastic, PC

9. Warranty and Support

Picun provides a reliable warranty service for your G1 Wireless Gaming Headset. This warranty covers potential defects or problems. For any issues or professional guidance, please contact our customer support team. Our team is ready to provide quick solutions and assistance.

For further support, please visit the official Picun website or refer to the contact information provided in your product packaging.

Picun G1