Tineco iFLOOR 3 Breeze Complete Wet Dry Vacuum & Pure ONE Station Cordless Stick Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the Tineco iFLOOR 3 Breeze Complete Wet Dry Vacuum and Pure ONE Station Cordless Stick Vacuum Cleaner. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new cleaning system. Please read it thoroughly before first use and retain it for future reference.

2. Important Safety Instructions

When using an electrical appliance, basic precautions should always be followed, including the following:

• Read all instructions before using this appliance.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only Tineco recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without filters in place.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance.
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.

3. Package Contents

Please check the contents of your package to ensure all items are present and undamaged:

• Tineco iFLOOR 3 Breeze Wet Dry Vacuum
• Pure ONE Station (Charging & Self-Cleaning Dock)
• Power Adapter
• Cleaning Solution
• Accessory Holder
• Extra Brush Roller
• Extra HEPA Filter
• Cleaning Tool
• User Manual

4. Product Overview

Familiarize yourself with the main components of your Tineco iFLOOR 3 Breeze and Pure ONE Station.

Figure 4.1: Multi-Functional OmniHub. This image displays the Pure ONE Station, which serves as a 4-in-1 hub for self-cleaning, charging, real-time detection, and storage of the vacuum cleaner and its accessories.

Figure 4.2: Wet Dry Vacuum Head. This image shows the vacuum head cleaning various types of sealed hard floors, including wood, tile, and marble, demonstrating its versatility.

5. Setup and Assembly

Follow these steps to assemble your Tineco iFLOOR 3 Breeze and set up the Pure ONE Station.

1. Handle Assembly: Insert the handle into the main body of the vacuum until it clicks into place.
2. Clean Water Tank Installation: Fill the clean water tank with water and a small amount of Tineco cleaning solution (if desired). Ensure the tank is securely attached to the main body.
3. Dirty Water Tank Installation: Ensure the dirty water tank is empty and properly installed.
4. Pure ONE Station Setup: Place the Pure ONE Station on a flat, stable surface near a power outlet. Connect the power adapter to the station and plug it into the outlet.
5. Initial Charge: Place the assembled vacuum cleaner onto the Pure ONE Station to begin charging. Ensure the charging indicator lights up. For first use, fully charge the battery.

6. Operating Instructions

Learn how to effectively use your Tineco iFLOOR 3 Breeze for optimal cleaning performance.

6.1 Powering On and Mode Selection

• Press the Power Button to turn on the vacuum.
• The vacuum will typically start in Auto Mode, which automatically adjusts suction power and water flow based on detected debris.
• Some models may offer a MAX mode for stubborn messes. Refer to the display for current mode.

6.2 Cleaning Hard Floors

The iFLOOR 3 Breeze is designed for sealed hard floors. It vacuums and mops simultaneously.

Figure 6.1: Self-Propulsion System. This image illustrates the self-propulsion feature of the vacuum, showing how it assists in moving the unit forward and backward for easier cleaning.

• Hold the handle firmly and tilt the vacuum back to engage the brush roller.
• Move the vacuum forward and backward over the soiled area. The self-propulsion system will assist with movement.
• For heavily soiled areas, you may need to pass over them multiple times.
• The vacuum leaves floors dry and streak-free due to its efficient water recovery system.

6.3 iLoop™ Smart Sensor Technology

The iLoop™ Smart Sensor detects debris and automatically adjusts cleaning power.

Figure 6.2: iLoop™ Smart Sensor in Action. This image demonstrates the iLoop™ Smart Sensor detecting varying levels of debris (no debris, less debris, more debris) and adjusting the cleaning power accordingly, indicated by a color-changing LED ring.

• Observe the LED display ring on the vacuum head. It changes color to indicate the level of dirt detected: blue for clean, red for dirty.
• The vacuum will automatically increase suction and water flow when more dirt is detected.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Tineco cleaning system.

7.1 Self-Cleaning Cycle

After each use, place the vacuum on the Pure ONE Station and initiate the self-cleaning cycle.

Figure 7.1: Mess-Free Self-Cleaning. This image shows the self-cleaning process of the brush roller, indicating that it is being cleaned and prepared for the next use, ensuring hygiene and convenience.

Figure 7.2: Deep Self-Cleaning System. This diagram illustrates the internal self-cleaning mechanism, showing how air and water flow through the brush, tube, and filters to ensure a thorough clean and consistent suction.

• Ensure the dirty water tank is empty and the clean water tank has sufficient water.
• Press the self-clean button on the Pure ONE Station or the vacuum (refer to your specific model's controls).
• The vacuum will automatically clean its brush roller and internal pathways.
• Once the cycle is complete, empty the dirty water tank and clean the filter if necessary.

7.2 Emptying the Dirty Water Tank

• Press the release button to detach the dirty water tank.
• Open the tank and dispose of the dirty water. Rinse the tank thoroughly with clean water.
• Clean the filter screen inside the dirty water tank.
• Reattach the tank securely.

7.3 3L Eco Dustbin (Pure ONE Station)

The Pure ONE Station features a large 3L dustbin for extended use without frequent emptying.

Figure 7.3: 3L Eco Dustbin. This image highlights the large 3-liter dustbin capacity of the Pure ONE Station, indicating it can hold debris for up to 60 days before needing to be emptied.

• The Pure ONE Station automatically empties the vacuum's dustbin into its larger 3L Eco Dustbin.
• Monitor the fill level of the 3L dustbin. Empty it when full, typically every 60 days depending on usage.
• To empty, remove the 3L dustbin from the station, open it, and dispose of the contents.

7.4 Filter Maintenance (HEPA Filter)

The H13 HEPA filter traps fine dust particles for cleaner air.

Figure 7.4: H13 HEPA Filtration System. This diagram illustrates the multi-stage filtration process, including the main cyclone, mesh filter, Tineco PureCyclone, and the H13 HEPA filter, which traps over 99.97% of dust down to 0.3 µm.

• The Pure ONE Station's self-cleaning function also cleans the HEPA filter.
• Periodically remove the HEPA filter from the vacuum (or station, depending on model design) and tap out any loose debris.
• Rinse the HEPA filter under running water if heavily soiled. Ensure it is completely dry before reinstallation (allow 24-48 hours).
• Replace the HEPA filter every 3-6 months, or as needed, to maintain optimal filtration.

8. Troubleshooting

Refer to this section for common issues and their solutions.

9. Specifications

Technical details for the Tineco iFLOOR 3 Breeze and Pure ONE Station.

• Brand: Tineco
• Model: iFLOOR 3 Breeze
• Special Feature: Bagless
• Filter Type: HEPA Filter
• Included Components: Brush
• Is Cordless?: Yes
• Capacity (Dustbin): 3 Liters (Pure ONE Station)
• Battery Description: Lithium-Ion
• Number of Items: 1
• Controller Type: Push Button
• Control Method: App
• Portable: Yes
• Number of Power Levels: 2
• Indoor/Outdoor Usage: Indoor
• Surface Recommendation: Hard Floor
• Power Source: Battery Powered

10. Warranty and Support

For warranty information and customer support, please refer to the warranty card included in your package or visit the official Tineco website. You can also contact Tineco customer service directly for assistance with product registration, technical support, or spare parts.

Tineco Official Website: www.tineco.com