1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your PAL Lighting Evenglow 64-EGMIC-150 Treo Micro Nicheless Pool & Spa Light. Please read all instructions carefully before proceeding.
1.1. Product Overview
The PAL Lighting Evenglow 64-EGMIC-150 Treo Micro is a multicolor nicheless LED light designed for pools and spas. It features 16 million colors, brightness control, and is designed for plug-and-play installation in any standard 1.5-inch wall fitting. The light operates on 12/24V DC and comes with a 150ft cable.
1.2. Safety Information
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure power is disconnected before installation or servicing.
- Water Depth: The underwater light should be installed in water depths between 2-12 inches (5-30.5 cm).
- Cable Integrity: Do not cut or splice the factory-sealed cable. Any damage to the cable can compromise the waterproof seal and void the warranty.
- Voltage: Ensure the power supply matches the light's operating voltage of 12/24V DC.
2. Package Contents
Verify that all components are present and undamaged before beginning installation.
- PAL Lighting Evenglow 64-EGMIC-150 Treo Micro Nicheless Pool & Spa Light with 150ft Cable
- Installation Manual
- Gasket and Locking Tabs (for GloBrite replacement, if applicable)
- Installation Tool (if applicable)
Figure 1: The PAL Lighting Evenglow 64-EGMIC-150 pool light with its 150ft cable coiled.
Figure 2: The light head of the PAL Lighting Evenglow 64-EGMIC-150, shown detached from its cable, highlighting the connection point.
Figure 3: Close-up of the PAL Lighting Evenglow 64-EGMIC-150 light head and its waterproof cable connector.
3. Installation
The Evenglow 64-EGMIC-150 is designed for easy installation into a standard 1.5-inch threaded wall fitting. The light operates on 12/24V DC. Ensure the power supply is compatible and properly installed.
3.1. General Installation Steps
- Prepare the Niche: Ensure the 1.5-inch wall fitting is clean and free of debris.
- Route the Cable: Carefully feed the 150ft cable through the conduit to the power source. Avoid kinking or damaging the cable.
- Insert the Light: Thread the light fixture into the 1.5-inch wall fitting. Hand-tighten until snug. Do not overtighten.
- Secure the Light: Use the provided locking tabs or gasket (if applicable for your specific pool type, e.g., fiberglass) to secure the light firmly in place.
- Electrical Connection: Connect the light's cable to a compatible 12/24V DC power supply. Ensure all connections are waterproof and meet electrical code requirements.
3.2. Installation Video Reference
The following video demonstrates the installation process for a 1.5-inch pool light. While the specific product in the video may vary slightly from your PAL Lighting model, the general installation principles for a nicheless 1.5-inch light are applicable.
Video 1: General installation guide for a 1.5-inch pool light. This video illustrates the steps for installing a similar type of nicheless pool light into a standard fitting.
4. Operation
Your PAL Lighting Evenglow Treo Micro light offers multiple color options and brightness control. Control can typically be achieved via a compatible remote control or a dedicated app, depending on your system configuration.
4.1. Color Modes and Brightness Control
- 16 Million Colors: Access a wide spectrum of colors to customize your pool or spa ambiance.
- Brightness Control: Adjust the light intensity to suit your preference.
- Pre-programmed Modes: The light may include various pre-set color changing sequences (e.g., Party Mode, Romance Mode, Color Wash, Royal Mode) for dynamic lighting effects.
4.2. Remote and App Control
The light is designed to be controlled by a compatible multi-smart remote control or a smartphone application. Please refer to the specific instructions provided with your controller for detailed pairing and operation.
Note: While the product description indicates a remote control, some packages may require a separate purchase of a compatible controller for full functionality. Please check your product packaging.
4.3. Controller Demonstration Video
The following video demonstrates the use of a ColorSync Controller for pool lights. This provides a general understanding of how such controllers operate to change colors and modes.
Video 2: Demonstration of a ColorSync Controller. This video shows how a remote and app can be used to control the color and modes of pool lights.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your pool light.
- Cleaning: Periodically clean the light's lens to remove any algae, mineral deposits, or debris that may obstruct light output. Use a soft brush or cloth and mild pool-safe cleaning solutions.
- Inspection: Regularly inspect the cable for any signs of wear, cuts, or damage. Check the light fixture for any cracks or loose components. Address any issues promptly to prevent water ingress.
- Winterization: If you winterize your pool, follow standard procedures for your region. Ensure the light remains submerged or is properly protected according to local guidelines.
6. Troubleshooting
If you encounter issues with your pool light, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; faulty wiring; incompatible voltage; damaged light. | Check circuit breaker/power source. Verify wiring connections. Ensure correct 12/24V DC voltage. Contact a qualified technician if light is suspected to be faulty. |
| Incorrect colors or modes | Controller malfunction; light not synchronized. | Refer to your controller's manual for synchronization steps. Ensure the controller is compatible with the light. |
| Remote control not working | Dead batteries; out of range; interference; pairing issue. | Replace remote batteries. Ensure you are within the remote's operating range. Minimize interference from other electronic devices. Re-pair the remote with the controller as per its instructions. |
| Water inside the light fixture | Improper installation; damaged seal/cable. | Immediately disconnect power. Remove the light and inspect for damage. Reinstall carefully, ensuring proper sealing. If damage is present, the light may need replacement. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 64-EGMIC-150 |
| Product Dimensions | 1800 x 2 x 2 inches (approx. 150ft cable length) |
| Voltage | 12/24V DC |
| Fitting Type | Standard 1.5-inch wall fitting |
| Color Options | Multicolor (16 Million colors) |
| Features | Brightness control, Plug & Play |
| Manufacturer | PAL LIGHTING |
8. Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or contact PAL Lighting directly through their official website or customer service channels. Keep your proof of purchase for warranty claims.
