1. Introduction
This manual provides essential information for the safe and efficient use of your HYPNIA Nova Fabric Storage Bed. Please read these instructions carefully before assembly and operation, and retain them for future reference.
The HYPNIA Nova storage bed features a modern design with a rounded headboard and beige fabric upholstery. It includes a spacious storage compartment of up to 970 liters, accessible via an easy-open strap and a secure lifting mechanism assisted by robust gas springs.
Image 1.1: The HYPNIA Nova Fabric Storage Bed in beige, shown with a mattress. This image provides a general view of the assembled bed.
2. Safety Warnings
- Assembly: Exercise extreme caution during the assembly process. Ensure all components are correctly aligned and securely fastened before use.
- Folding Mechanism: Be careful when handling the bed's lifting and folding mechanism. Keep hands and fingers clear of moving parts to prevent injury.
- Weight Limit: Do not exceed the maximum weight capacity of 200 kg (440 lbs) for the bed. Exceeding this limit can lead to instability, structural damage, or personal injury.
- Children and Pets: Keep children and pets away from the storage mechanism during operation. Never allow children to play inside the storage compartment.
- Even Distribution: Distribute weight evenly across the bed frame and within the storage compartment.
- Maintenance: Regularly inspect all bolts and connections to ensure they remain tight.
3. Components List
Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, contact HYPNIA customer support.
- Bed Frame (Wood and Metal Structure)
- Rounded Headboard (Foam and Fiber Padded)
- 12 Passive Slats
- Central Reinforcement Bar
- 4 Feet
- Lifting Mechanism (with robust gas springs)
- Easy-Open Strap
- Assembly Hardware (bolts, nuts, washers, etc. - specific quantities will be in the separate assembly guide)
Image 3.1: The HYPNIA Nova Fabric Storage Bed frame without a mattress, showcasing the internal structure and slats.
Image 3.2: Detailed view of the bed frame's internal structure, showing slat placement and approximate dimensions for the frame's edge and depth.
4. Setup and Assembly
While this manual provides general guidance, a detailed step-by-step assembly guide with diagrams is included in your product packaging. Please refer to that guide for specific instructions on assembling your HYPNIA Nova storage bed.
General Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Frame: Connect the side rails, footboard, and headboard using the provided hardware. Ensure all connections are tight and secure.
- Install Slats: Place the 12 passive slats onto the designated supports. Ensure they are evenly spaced and securely fitted.
- Attach Central Reinforcement Bar: Secure the central reinforcement bar according to the assembly guide.
- Install Feet: Attach the four feet to the base of the bed frame.
- Install Lifting Mechanism: Carefully install the lifting mechanism with the robust gas springs. This step often requires two people and careful attention to safety warnings.
- Final Check: Before placing a mattress, double-check all connections for tightness and stability.
Note: The bed frame is designed for a 200x200cm mattress. Ensure your mattress size is compatible.
5. Operating the Storage Mechanism
The HYPNIA Nova storage bed features a convenient and secure lifting mechanism to access the spacious storage compartment.
To Open the Storage Compartment:
- Clear the Bed: Ensure there is no weight on the mattress. Remove any pillows or heavy bedding that might obstruct the lifting process.
- Locate Strap: Find the easy-open strap, typically located at the foot end of the bed.
- Lift Gently: Grasp the strap firmly and lift the mattress base upwards. The robust gas springs will assist in the lifting, making the process smooth and effortless. Continue lifting until the mechanism locks into its fully open position.
Image 5.1: A hand demonstrates pulling the easy-open strap to initiate the lifting of the mattress base.
Image 5.2: A person is shown organizing items within the spacious storage compartment of the HYPNIA Nova bed while it is fully open.
Image 5.3: A close-up of the storage area, demonstrating its capacity with various items like pillows, blankets, and books.
To Close the Storage Compartment:
- Clear Obstructions: Ensure no items are protruding from the storage compartment that could prevent the bed from closing properly.
- Lower Gently: Grasp the strap and gently pull the mattress base downwards. The gas springs will control the descent. Apply slight downward pressure until the bed base is fully closed and rests securely on the frame.
Image 5.4: A person is shown gently lowering the mattress base to close the storage compartment.
Image 5.5: The HYPNIA Nova bed fully closed with bedding, highlighting the discreet easy-open strap at the foot of the bed.
6. Maintenance
- Cleaning the Fabric: For general cleaning, wipe the fabric upholstery with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the fabric.
- Spills: In case of spills, blot immediately with a clean, dry cloth. Do not rub.
- Structural Check: Periodically check all bolts, screws, and connections to ensure they are tight. Re-tighten if necessary to maintain the bed's stability.
- Mechanism Check: Inspect the lifting mechanism and gas springs for any signs of wear or damage. If any issues are observed, contact customer support. Do not attempt to repair the mechanism yourself.
- Ventilation: Ensure adequate ventilation around and within the storage compartment to prevent moisture buildup, especially if storing textiles.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed base difficult to lift or lower. |
|
|
| Bed frame feels unstable or wobbly. |
|
|
| Squeaking noises. |
|
|
8. Product Specifications
| Model Name | Nova Fabric Storage Bed |
| Model Number | 200200 |
| Brand | HYPNIA |
| Color | Beige |
| Style | Modern |
| Upholstery Finish | Fabric |
| Compatible Mattress Size | 200x200cm (also compatible with Double, Queen as per general product line, but this specific model is 200x200cm) |
| Overall Item Dimensions (L x W x H) | 2.08 x 1.5 x 0.8 meters (208cm x 150cm x 80cm) - Note: This refers to the frame's external dimensions. The mattress area is 200x200cm. There seems to be a discrepancy in the provided data for item dimensions vs. title. We prioritize the title's 200x200cm for mattress size. |
| Storage Capacity | Up to 970 Liters |
| Maximum Weight Capacity | 200 kg (440 lbs) |
| Distance from Floor to Item | 5 Centimeters |
| Composition | Wood and Metal Structure, Foam and Fiber Padding, 12 Passive Slats |
| Care Instructions | Wipe with a damp cloth |
| Assembly Required | Yes (Detailed guide included in packaging) |
9. Warranty Information
The product description mentions a 10-year guarantee for mattresses. For specific warranty details regarding the HYPNIA Nova Fabric Storage Bed, please refer to the warranty card included with your purchase or visit the official HYPNIA website. Keep your proof of purchase for any warranty claims.
10. Customer Support
If you have any questions, require assistance with assembly, or encounter any issues with your HYPNIA Nova Fabric Storage Bed, please contact HYPNIA customer support through their official website or the contact information provided in your product packaging.
For more information, visit: www.hypnia.fr