1. Introduction
Thank you for choosing the Hypnia Nova Fabric Storage Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed. The Nova storage bed combines elegant design with practical storage solutions, featuring a rounded headboard, easy-open strap, and up to 970 liters of storage capacity. Its solid structure, reinforced with a central support bar, and beige fabric upholstery ensure both comfort and durability.
Please read these instructions carefully before assembly and use, and retain them for future reference.
Image 1.1: The Hypnia Nova Fabric Storage Bed in a bedroom setting, showcasing its design and beige fabric.
Image 1.2: A close-up view of a mattress resting on the Hypnia Nova bed frame, highlighting the fabric finish.
2. Safety Information
Important Safety Warnings:
- Exercise caution during the assembly and handling of the lifting mechanism. Ensure hands and fingers are clear of moving parts.
- Do not exceed the maximum weight capacity of 200 kg on the bed frame to prevent instability or damage.
- Ensure all components are securely fastened before use. Regularly check and tighten screws as needed.
- Keep small parts and packaging materials away from children to avoid choking hazards.
- Assemble the bed on a soft, clean surface to prevent scratching the product or your floor.
3. Setup and Assembly
The Hypnia Nova storage bed requires assembly. It is recommended that two adults assemble this product. Please ensure all parts are present before beginning assembly.
3.1 Package Contents
The package includes:
- Bed frame components (wood and metal)
- Rounded headboard
- 12 passive slats
- Central reinforcement bar
- 4 bed legs
- Lifting mechanism with robust cylinders
- Assembly hardware (screws, bolts, etc.)
- Fabric pull strap for opening
3.2 Assembly Steps
- Unpack all components and verify against the parts list.
- Assemble the main bed frame structure using the provided hardware. Ensure all connections are tight.
- Attach the rounded headboard to the main frame.
- Install the central reinforcement bar for added stability.
- Insert the 12 passive slats into their designated positions on the bed frame.
- Mount the lifting mechanism, ensuring the robust cylinders are correctly installed for safe operation.
- Attach the 4 bed legs to the base of the frame.
- Secure the fabric pull strap to the mattress base for easy opening of the storage compartment.
- Perform a final check to ensure all screws are tightened and the bed is stable.
Image 3.1: The Hypnia Nova bed frame structure, showing the slat system and headboard attachment.
Image 3.2: Detailed view of the bed frame, illustrating slat placement and frame dimensions (e.g., 10 cm, 5 cm, 20 cm depth).
4. Operating Instructions
4.1 Accessing the Storage Compartment
The Hypnia Nova bed features a convenient under-bed storage compartment, offering up to 970 liters of space.
- Ensure there is no excessive weight on the mattress before opening.
- Locate the fabric pull strap positioned at the foot end of the bed.
- Firmly grasp the strap and lift the mattress base upwards. The robust cylinders will assist in lifting and holding the base in an open position.
- To close, gently pull the mattress base downwards until it securely latches into place. Ensure it is fully closed before placing weight on the bed.
Image 4.1: Demonstrating the use of the fabric pull strap to open the storage compartment.
Image 4.2: The storage compartment of the Hypnia Nova bed shown open, with items stored inside.
Image 4.3: A view of the internal lifting mechanism and slat system when the storage is open.
5. Maintenance
5.1 Cleaning
- For the fabric upholstery, spot clean only with a damp cloth and mild detergent. Do not use harsh chemicals or abrasive cleaners.
- Vacuum the fabric regularly using an upholstery attachment to remove dust and debris.
- For the wooden and metal components, wipe with a soft, dry cloth.
5.2 General Care
- Periodically check all screws and bolts and tighten them if necessary to maintain stability.
- Avoid dragging the bed when moving it; always lift it to prevent damage to the legs and frame.
- Do not jump on the bed, as this can damage the frame and slat system.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels unstable or wobbly. | Loose screws or bolts. | Check and tighten all assembly hardware. Ensure the bed is on a level surface. |
| Lifting mechanism is difficult to open or close. | Mechanism not properly installed; excessive weight on mattress; cylinders worn. | Verify correct installation of the lifting mechanism. Remove heavy items from the mattress. If cylinders are worn, contact support for replacement. |
| Squeaking noises. | Loose connections; friction between parts. | Tighten all bolts. Apply a small amount of silicone spray to friction points if necessary (avoiding fabric). |
| Storage compartment does not stay open. | Cylinders not fully engaged or faulty. | Ensure the mattress base is lifted fully until the cylinders lock. If the issue persists, the cylinders may need replacement. |
7. Specifications
| Model Number: | 200200 |
| Brand: | Hypnia |
| Color: | Beige |
| Material: | Wood and metal frame, foam and fiber filling, fabric upholstery |
| Compatible Mattress Size: | 140 x 190 cm |
| Product Dimensions (L x W x H): | 2.08L x 1.5W x 0.8H meters |
| Distance from Ground to Item: | 5 cm |
| Maximum Weight Capacity: | 200 kg |
| Storage Capacity: | Up to 970 liters |
| Included Components: | Bed legs, Headboard, Slats, Lifting mechanism |
| Care Instructions: | Spot clean fabric only (hand wash recommended for specific stains) |
8. Warranty and Support
8.1 Warranty Information
Hypnia is a recognized French brand committed to your well-being. While this specific product's warranty duration is not explicitly stated, Hypnia mattresses typically come with a 10-year warranty. Please refer to your purchase documentation or the official Hypnia website for detailed warranty terms applicable to the Nova Fabric Storage Bed.
8.2 Customer Support
For any questions, missing parts, or assistance with assembly or operation, please contact Hypnia customer support. Contact details can typically be found on the Hypnia official website or your purchase invoice.
Note: Always provide your model number (200200) and purchase date when contacting support.