YASHE KD-0803B 240ml 4-in-1 Electric Milk Frother and Steamer User Manual

1. Introduction

Thank you for purchasing the YASHE KD-0803B Electric Milk Frother and Steamer. This appliance is designed to effortlessly transform milk into rich, creamy foam or heat it for your favorite beverages such as lattes, cappuccinos, and hot chocolate. Please read this manual carefully before use to ensure safe and optimal operation.

Image 1.1: The YASHE KD-0803B Electric Milk Frother, a sleek stainless steel appliance with control buttons, shown next to a cup of frothed coffee and coffee beans.

2. Safety Instructions

To prevent injury or damage, always follow these basic safety precautions:

• Read all instructions before using the appliance.
• Do not immerse the base unit, power cord, or plug in water or other liquids.
• Keep the appliance out of reach of children. Close supervision is necessary when used near children.
• Unplug from the outlet when not in use and before cleaning. Allow to cool before handling parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• Use only attachments recommended by the manufacturer.
• Do not use outdoors.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to 'off', then remove the plug from the wall outlet.
• Do not use the appliance for other than intended use.
• Avoid contact with moving parts.
• This appliance has an automatic shut-off feature for safety and energy saving.

Image 2.1: Diagram illustrating the safe operation features of the milk frother, including automatic shut-off, temperature control, and quiet operation, with arrows indicating heat circulation.

3. Product Overview

3.1 Components

• Frother Jug (Stainless Steel)
• Transparent Lid
• Power Base
• Frothing Whisk (for hot/cold foam)
• Heating Whisk (for heating milk/chocolate milk)

3.2 Features

The YASHE KD-0803B offers 4-in-1 functionality:

• Hot Dense Foam: For cappuccinos and lattes.
• Hot Airy Foam: For macchiatos.
• Cold Foam: For iced coffees and cold beverages.
• Hot Milk: For hot chocolate or simply warming milk.

Image 3.1: An illustration showing the YASHE milk frother producing various beverages: Latte, Hot Chocolate, Hot Milk, and Cappuccino, highlighting its 4-in-1 functionality.

4. Setup

1. Unpack: Carefully remove all packaging materials and ensure all components are present.
2. Clean: Before first use, clean the frother jug and whisks according to the 'Maintenance and Cleaning' section.
3. Place: Place the power base on a dry, flat, and stable surface.
4. Select Whisk: Choose the appropriate whisk for your desired function (frothing or heating) and securely place it onto the shaft inside the jug.
5. Fill Milk: Pour milk into the frother jug, observing the MAX and MIN fill lines. Do not overfill.

Image 4.1: A close-up of the frother jug interior, showing clear 'MAX' and 'MIN' fill lines for different functions: 240ml for heating milk, 130ml for hot froth, and 75ml minimum filling requirement.

Image 4.2: Two types of whisks are shown: one for foaming milk (spring coil) and one for heating milk (flat paddle), with descriptions of their respective uses.

5. Operating Instructions

For best results, use cold whole milk (fat content >3%). Other milk types (soy, almond) may yield different results.

5.1 Hot Dense Foam (Cappuccino, Latte)

1. Insert the frothing whisk (with spring coil) into the jug.
2. Pour milk up to the MAX (130ml) frothing line.
3. Place the lid on the jug and place the jug on the power base.
4. Press the appropriate button for hot dense foam. The indicator light will illuminate.
5. The frother will automatically stop when the process is complete (approx. 2 minutes).

5.2 Hot Milk (Hot Chocolate, Warming Milk)

1. Insert the heating whisk (flat paddle) into the jug.
2. Pour milk up to the MAX (240ml) heating line.
3. Place the lid on the jug and place the jug on the power base.
4. Press the appropriate button for hot milk. The indicator light will illuminate.
5. The frother will automatically stop when the process is complete.

5.3 Cold Foam

1. Insert the frothing whisk (with spring coil) into the jug.
2. Pour milk up to the MAX (130ml) frothing line.
3. Place the lid on the jug and place the jug on the power base.
4. Press the appropriate button for cold foam. The indicator light will illuminate.
5. The frother will automatically stop when the process is complete.

Image 5.1: A visual representation of milk being poured from the frother, demonstrating the creation of dense and creamy milk foam, with a glass of coffee below.

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your frother.

1. Unplug: Always unplug the appliance from the power outlet before cleaning.
2. Cool Down: Allow the frother to cool completely before cleaning.
3. Clean Jug: The interior of the stainless steel jug is non-stick. Rinse the inner surface with water immediately after use or wipe with a soft, damp cloth. For stubborn residue, use a non-abrasive sponge and mild detergent.
4. Clean Whisks: Remove the whisks and rinse them under running water. They can also be washed with mild soap.
5. Clean Lid: Wash the transparent lid with warm, soapy water.
6. Clean Base: Wipe the exterior of the frother jug and the power base with a soft, damp cloth. Never immerse the power base in water or any other liquid.
7. Dry: Ensure all parts are completely dry before reassembling or storing.

Note: The frother jug and whisks are not dishwasher safe. Hand wash only.

Image 6.1: A visual demonstration of cleaning the frother jug by rinsing its interior with water, emphasizing the ease of maintenance.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.