Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your PPLEE LED Large Display Mirror Alarm Clock, Model CR1018. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.
Package Contents
- PPLEE LED Mirror Alarm Clock (Model CR1018)
- Power Adapter (American standard)
- USB Data Cable
- CR2032 Coin Cell Battery (pre-installed for backup)
- User Manual (this document)
Product Overview
The PPLEE Alarm Clock features an 8.7-inch LED mirror display, dual alarms, adjustable brightness and volume, and two USB charging ports. Below are illustrations of the device and its key components.
Figure 1: Front view of the PPLEE Alarm Clock with phones charging.
Figure 2: Key features of the PPLEE Alarm Clock.
Figure 3: Rear view of the PPLEE Alarm Clock with labeled buttons and ports.
Key Features:
- 8.7" Large LED Mirror Display
- Dual Alarms with 9-minute Snooze Function
- 8-Level Adjustable Brightness
- 7-Level Adjustable Alarm Volume (90-110 dB)
- Two USB Charging Ports (for external devices)
- AC Powered with CR2032 Battery Backup
- 12/24 Hour Time Format
- Daylight Saving Time (DST) Function
Setup
- Power Connection: Connect the provided USB data cable to the alarm clock and then to the power adapter. Plug the power adapter into a standard wall outlet. The clock display will illuminate.
- Battery Backup: A CR2032 coin cell battery is pre-installed. This battery serves as a backup to retain time and alarm settings during a power outage or when the clock is unplugged. Note that the screen will be blank and alarms will not sound when operating on battery backup alone.
Figure 4: Power Off Memory feature, illustrating how settings are retained.
Operating Instructions
1. Setting the Time
- Press and hold the "TIME SET" button (refer to Figure 3 for button location). The hour digits will begin to flash.
- Use the "+" or "-" buttons to adjust the hour.
- Press "TIME SET" again to confirm the hour and move to minute adjustment. The minute digits will flash.
- Use the "+" or "-" buttons to adjust the minutes.
- Press "TIME SET" one more time to confirm the minutes and exit time setting mode.
2. Setting Alarms (Alarm 1 and Alarm 2)
The clock supports two independent alarms.
Figure 5: Dual Alarm functionality.
- Press and hold the "ALARM 1" button (or "ALARM 2" for the second alarm). The alarm hour digits will flash.
- Use the "+" or "-" buttons to adjust the alarm hour.
- Press "ALARM 1" (or "ALARM 2") again to confirm the hour and move to minute adjustment. The alarm minute digits will flash.
- Use the "+" or "-" buttons to adjust the alarm minutes.
- Press "ALARM 1" (or "ALARM 2") one more time to confirm the alarm time. The alarm icon will appear on the display, indicating the alarm is active.
- To deactivate an alarm, press the corresponding "ALARM OFF" button once to turn it off for 24 hours, or press and hold it to turn off the alarm permanently.
3. Snooze Function
When an alarm sounds, press the "SNOOZE" button to temporarily silence the alarm for 9 minutes. The alarm will sound again after 9 minutes. This can be repeated until the alarm is fully turned off.
4. Adjusting Brightness
The display brightness can be adjusted to 8 levels.
Figure 6: Brightness adjustment levels.
- Press the "BRIGHTNESS" button repeatedly to cycle through the 8 brightness levels.
- To turn off the display completely (dark mode), switch the clock dimmer to "OFF". A small red indicator light on top will remain on to show the clock is still powered.
5. Adjusting Volume
The alarm volume can be adjusted to 7 levels, ranging from 90dB to 110dB.
Figure 7: Volume adjustment levels.
- Press the "VOLUME" button repeatedly to cycle through the 7 volume levels.
6. 12/24 Hour Mode and DST Function
Figure 8: Time display options (12H, 24H, DST).
- 12/24 Hour Mode: Press the "12/24H" button to switch between 12-hour and 24-hour time formats. In 12-hour mode, "AM" or "PM" indicators will be displayed.
- Daylight Saving Time (DST): Press the "DST" button to activate or deactivate the Daylight Saving Time function. When activated, the time will adjust by one hour.
Dual USB Charging Ports
The alarm clock is equipped with two USB charging ports on the rear. These ports allow you to charge your mobile phone or other USB-powered devices directly from the clock, reducing the need for additional wall adapters.
Figure 9: Dual USB charging ports in use.
- Simply connect your device's USB charging cable to one of the ports on the back of the alarm clock.
- Ensure the alarm clock is connected to AC power for the charging ports to function.
Maintenance
- Cleaning: The mirror surface is designed to resist dust and is easy to clean. Use a soft, dry, lint-free cloth to gently wipe the display and casing. Avoid abrasive cleaners or sprays directly on the unit.
- Battery Replacement: If the CR2032 backup battery needs replacement, carefully open the battery compartment on the back of the unit, remove the old battery, and insert a new CR2032 battery with the correct polarity.
- Storage: If storing the clock for an extended period, disconnect it from power and remove the backup battery to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is blank. | Not connected to AC power; backup battery depleted; brightness set to OFF. | Ensure AC adapter is securely plugged in. Replace CR2032 backup battery if needed. Adjust brightness level. |
| Alarm does not sound. | Alarm not activated; volume too low; clock not connected to AC power. | Verify alarm is set and icon is displayed. Increase alarm volume. Ensure AC power is connected. |
| Cannot set time/alarm. | Buttons not pressed correctly; unit unresponsive. | Press and hold the respective "SET" button until digits flash. If unresponsive, unplug and replug the power adapter to reset. |
| USB charging ports not working. | Clock not connected to AC power. | Ensure the alarm clock is connected to a live AC power outlet. |
Specifications
| Feature | Detail |
|---|---|
| Brand | PPLEE |
| Model Number | CR1018 |
| Display Type | Digital LED, Mirror Surface |
| Display Size | 8.7 inches |
| Power Source | AC Powered (Adapter included) |
| Battery Backup | 1 x CR2032 (included) |
| USB Charging Ports | 2 ports |
| Brightness Levels | 8 levels (including OFF) |
| Volume Levels | 7 levels (90-110 dB) |
| Snooze Duration | 9 minutes |
| Time Format | 12H/24H selectable |
| Special Features | DST Function, Dual Alarms, Mirror Surface |
| Material | Plastic (Acrylonitrile Butadiene Styrene) |
| Item Weight | 10.2 ounces |
Warranty and Support
PPLEE is committed to providing high-quality products and customer satisfaction.
Figure 10: PPLEE Warranty and Support details.
- 45-Day Full Refund: If you are unsatisfied with the product or have any questions, please contact customer support for a full refund or technical assistance.
- 18-Month Warranty: In case of any quality problems within 18 months of purchase, please contact us for a replacement or partial refund.
- Lifetime Free Support: We offer free lifetime user support. Do not hesitate to contact us if you have any questions or concerns.
For support, please visit the PPLEE Store on Amazon or contact customer service directly.
