1. Introduction
This manual provides comprehensive instructions for the assembly, safe use, and proper maintenance of your VECELO 5-Piece Dining Table Set. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
2. Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand on the table or chairs.
- Keep small parts away from children during assembly.
- Distribute weight evenly on the table surface.
- Do not exceed the maximum weight capacities: Table: 180 lbs, Each Chair: 320 lbs.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 1 x Rectangular Dining Table
- 4 x Dining Chairs
- 1 x Accessory Bag (containing screws, bolts, and tools)
- 1 x User Manual (this document)
4. Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to have two people for table assembly.
4.1. Chair Assembly
Important Tip: When assembling the chair frame, do not fully tighten screws until all parts are loosely connected. This allows for adjustment and proper alignment. Fully tighten all screws once the chair is upright and stable.
- Step 1: Assemble Chair Frame. Attach the chair leg pieces together using the provided screws. Ensure the front and rear iron support brackets (Parts 6 and 7) are correctly oriented. Part 6 (shorter, 330mm/13") goes on the back side, and Part 7 (longer, 360mm/14") goes near the leg when you sit. Refer to the image for correct placement.
- Step 2: Attach Seat. Place the chair seat (Part 5) onto the assembled frame. The chair seat is trapezoid-shaped, not square. Ensure the longer side (395mm/15.5") is at the front and the shorter side (355mm/14") is at the back to align with the frame. Secure with screws.
- Step 3: Attach Backrest. Align the backrest (Part 4) with the upper part of the chair frame. The backrest screw holes and metal frame holes must match correctly. The shorter distance (268mm/10.5") between holes should align with the frame. Secure with screws.
- Step 4: Final Tightening. Once all parts are loosely assembled and correctly aligned, carefully tighten all screws using the provided tool. Do not overtighten.
4.2. Table Assembly
The table assembly typically involves attaching the legs to the tabletop. Refer to the included instruction sheet for specific diagrams and screw types.
- Step 1: Prepare Tabletop. Place the tabletop upside down on a soft, clean surface to prevent scratches.
- Step 2: Attach Legs. Align each table leg with the pre-drilled holes on the underside of the tabletop. Secure each leg using the appropriate screws and bolts from the accessory bag. Do not fully tighten yet.
- Step 3: Attach Support Brackets (if applicable). If your table includes additional support brackets between the legs, attach them now, ensuring they are correctly oriented.
- Step 4: Final Tightening. Once all legs and supports are loosely attached, carefully turn the table upright. Ensure it is stable and level, then fully tighten all screws and bolts.
5. Usage
This VECELO dining set is designed for indoor use in kitchens, dining rooms, breakfast nooks, or small spaces. The chairs are designed to fit under the table when not in use, optimizing space.
6. Maintenance
- Cleaning: Wipe surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Spills: Clean up spills immediately to prevent staining, especially on the MDF tabletop.
- Tightening: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain stability and safety.
- Protection: Use placemats or coasters to protect the tabletop from heat, scratches, and moisture.
7. Troubleshooting
7.1. Chair Seat and Back Board Assembly Issues
If you encounter difficulties with the chair seat or backrest alignment during assembly, please refer to the following video for detailed troubleshooting tips. Incorrect orientation of parts 6 and 7, or the trapezoid seat, can lead to misalignment.
Video 7.1: Troubleshooting Tips for Chair Seat and Back Board Assembly. This video demonstrates correct part orientation and assembly techniques to prevent common issues.
7.2. General Assembly Tips
- Misaligned Holes: If screw holes do not align perfectly, loosen all screws on the affected section, adjust the parts slightly, and then re-tighten. Avoid forcing screws, as this can damage the material.
- Wobbly Table/Chairs: Ensure all screws are fully tightened. If wobbling persists, check that all legs are on an even surface. Slight adjustments to screw tightness can sometimes resolve minor wobbles.
- Missing Parts: Double-check the accessory bag and packaging. If parts are genuinely missing, contact customer support immediately.
8. Specifications
| Feature | Detail |
|---|---|
| Model | 5-Piece Dining Set (B0D2QV6NTG) |
| Color | Black |
| Material | MDF (Medium-Density Fiberboard), Metal |
| Dining Table Dimensions (L x W x H) | 43.3" x 27.5" x 31.2" (110cm x 70cm x 79cm) |
| Chair Dimensions (L x W x H) | 15.5" x 15.3" x 33.8" (39.4cm x 38.9cm x 85.9cm) |
| Table Weight Capacity | 180 lbs (81.6 kg) |
| Each Chair Weight Capacity | 320 lbs (145.1 kg) |
| Item Weight (Total) | 67.24 lbs (30.5 kg) |
9. Warranty and Support
VECELO is committed to providing quality products and customer satisfaction. If you encounter any problems with your product, including missing parts or assembly difficulties, please do not hesitate to contact our customer service team.
Email: support@vecelo.com
Our technical support team aims to reply within 24 hours.
For information regarding protection plans, please refer to your purchase documentation or the retailer's website.