DONOW DONOW-Soundmore

DONOW Portable Bluetooth Speaker with Lights User Manual

Model: DONOW-Soundmore

Brand: DONOW

1. Introduction

Thank you for choosing the DONOW Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. This speaker is designed to deliver high-fidelity stereo sound with dynamic lighting effects, suitable for various indoor and outdoor environments.

DONOW Portable Bluetooth Speaker with Lights

Image 1: Front view of the DONOW Portable Bluetooth Speaker, showcasing its sleek design and illuminated speaker rings.

2. Key Features

Speaker with 30W Loud Sound and internal components

Image 2: Diagram illustrating the speaker's internal components and its 30W loud sound capability.

Speaker with RGB light effects

Image 3: The speaker displaying its colorful RGB light show, with various light patterns shown.

Speaker with 20H Playback Time

Image 4: Visual representation of the speaker's extended 20-hour battery life, suitable for all-day use.

3. Setup Guide

3.1 Charging the Speaker

Before first use, fully charge the speaker. Connect the provided USB-C charging cable to the speaker's USB-C charging port (located under the waterproof flap on the back) and the other end to a compatible USB power adapter (not included).

3.2 Bluetooth Pairing

  1. Power On: Press and hold the Power On/Off button (marked with 'O') on the top panel until the LED indicator light turns blue and you hear an audible prompt.
  2. Pairing Mode: The speaker will automatically enter Bluetooth pairing mode, indicated by a blinking blue LED.
  3. Connect Device: On your smartphone, tablet, or other Bluetooth-enabled device, go to Bluetooth settings and select "DONOW-Soundmore" from the list of available devices.
  4. Confirmation: Once connected, the LED indicator will turn solid blue, and you will hear a confirmation sound.

3.3 AUX Input Connection

For devices without Bluetooth, use the 3.5mm AUX input. Open the waterproof flap on the back of the speaker and connect a 3.5mm audio cable (included) from your device's audio output to the speaker's AUX port. The speaker will automatically switch to AUX mode.

Speaker showing Bluetooth and AUX connection options

Image 5: The speaker highlighting its two connection methods: Bluetooth and 3.5mm AUX-IN.

Video 1: Official product video demonstrating the DONOW Bluetooth Speaker's features, including power-on, Bluetooth pairing, and light show.

4. Operating Instructions

Operating Guidelines for DONOW Speaker buttons

Image 6: Detailed diagram of the speaker's top panel buttons and rear ports for operational guidance.

4.1 Button Functions

ButtonFunction
Power On/Off / Mode Switch (O)Press and hold to power on/off. Short press to switch between Bluetooth and AUX modes.
Volume Down / Previous Track (-)Short press for volume down. Long press for previous track.
Play/Pause / Hands-free Calls (►)Short press to play/pause music. Short press to answer/end calls. Long press to reject calls.
Volume Up / Next Track (+)Short press for volume up. Long press for next track.
Light Mode (✶)Short press to cycle through 7 light effects. Long press to turn lights on/off.

4.2 Dynamic Light Show

The speaker features a dynamic light show with 7 different effects that can synchronize with your music. Use the Light Mode button (✶) to:

5. Maintenance and Care

To ensure the longevity of your DONOW speaker, follow these maintenance guidelines:

6. Troubleshooting

ProblemSolution
Speaker does not power on.Ensure the battery is charged. Connect the speaker to a power source and try again.
No sound from the speaker.Check the volume level on both the speaker and your connected device. Ensure the speaker is correctly paired via Bluetooth or the AUX cable is fully inserted.
Bluetooth connection fails.Ensure the speaker is in pairing mode (blinking blue LED). Turn off and on Bluetooth on your device. Move the speaker closer to your device. Forget the device in your Bluetooth settings and re-pair.
Lights are not working or stuck.Press the Light Mode button (✶) to cycle through modes or long press to turn them on/off. Ensure the speaker has sufficient battery.
Poor sound quality / Distortion.Reduce the volume on both the speaker and your device. Ensure there are no obstructions between the speaker and the Bluetooth device. Try a different audio source.

7. Specifications

AttributeDetail
Model NameDONOW-Soundmore
Speaker TypeOutdoor
Speaker Maximum Output Power30 Watts
Audio Output ModeStereo
Connectivity TechnologyBluetooth 5.3
Wireless Communication RangeUp to 100 Feet (approx. 30 meters)
Special FeaturesBass Boost, LED Light (7 effects), IPX5 Waterproof, Built-in Microphone
Battery Life20 Hours
Power SourceBattery Powered (1 Lithium Ion battery included)
Product Dimensions3.46"D x 7.87"W x 3.23"H (8.8cm D x 20.1cm W x 8.2cm H)
Item Weight1.61 pounds (approx. 0.73 kg)
ManufacturerDONOW
Product parameters table for DONOW speaker

Image 7: A visual summary of the speaker's key product parameters and dimensions.

8. Warranty and Support

The DONOW Portable Bluetooth Speaker comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the warranty card included in your product packaging or contact DONOW customer support directly.

For technical support, troubleshooting assistance, or any inquiries regarding your product, please contact DONOW customer service through the official channels provided at the time of purchase or on the manufacturer's website.

Related Documents - DONOW-Soundmore

Preview DONOW Squat Rider DN-6334B Assembly Manual
Comprehensive assembly manual for the DONOW Squat Rider DN-6334B fitness machine, detailing parts and step-by-step instructions.