oneisall PTM

Download PDF
Contents

oneisall 4L Wireless Cat Drinking Fountain

User Manual

Introduction

Thank you for choosing the oneisall 4L Wireless Cat Drinking Fountain. This innovative fountain provides fresh, filtered water for your pets, encouraging healthy hydration habits. Its wireless design offers unparalleled flexibility, allowing you to place it anywhere in your home without the constraints of power outlets. Featuring a motion sensor, long battery life, and a multi-layer filtration system, this fountain is designed for convenience, cleanliness, and quiet operation.

oneisall 4L Wireless Cat Drinking Fountain

Image: The oneisall 4L Wireless Cat Drinking Fountain, showcasing its sleek stainless steel design and water flow.

Safety Information

Please read all safety instructions carefully before using the product to ensure safe operation and prevent damage.

  • US Safety Warning: Keep this unit in a horizontal position; do not knock over the unit, otherwise the unit may not work properly or spill water.
  • Disconnect the power supply when performing the whole machine cleaning.
  • Do not rinse or soak the main unit of the water dispenser with water to avoid damaging the unit.
  • Ensure the fountain is placed on a stable, level surface to prevent tipping.
  • Use only the original charging cable and adapter provided by the manufacturer.
  • Keep out of reach of children and pets when not in use or during maintenance.
Safety warnings and manufacturer information for oneisall cat fountain

Image: Detailed safety warnings and manufacturer information, including instructions to keep the unit horizontal and avoid soaking the main unit.

Product Overview

The oneisall 4L Wireless Cat Drinking Fountain is designed with your pet's health and your convenience in mind. Key components and features include:

  • Wireless Design: Freedom to place the fountain anywhere, eliminating tangled cables.
  • 304 Stainless Steel: Durable, BPA-free material for cleanliness and freshness.
  • 4L Capacity: Sufficient water for multiple pets, reducing refill frequency.
  • Motion Sensor: Activates water flow when a pet approaches, conserving battery and water.
  • Ultra-Quiet Pump: Operates at less than 30dB, ensuring a peaceful environment.
  • Multi-Layer Filtration System: Effectively removes odors, pet hair, and impurities.
  • Long Battery Life: Up to 60 days of operation on a single charge (3000mAh battery).
Wireless cat fountain placement in various rooms

Image: Illustration showing the wireless cat fountain can be placed anywhere in a home, including bedroom, living room, kitchen, and balcony.

Setup

Follow these steps for initial setup of your oneisall cat drinking fountain:

  1. Charge the Fountain: Before first use, fully charge the built-in 3000mAh battery using the provided Type-C cable. A full charge takes approximately 3.5 hours and provides up to 60 days of operation.
  2. Assemble Filtration System:
    • Place the primary sponge into its designated slot.
    • Insert the filter cotton.
    • Add the activated carbon/ion exchange resin filter.
    • Place the final filter cotton layer.
  3. Fill with Water: Fill the stainless steel reservoir with clean water up to the MAX fill line. The fountain has a 4L capacity.
  4. Place the Pump Unit: Securely place the pump unit onto the designated area within the fountain.
  5. Position the Fountain: Place the assembled fountain on a stable, horizontal surface in your desired location. Ensure it is not easily knocked over.
Multi-layer filtration system diagram

Image: Diagram illustrating the multi-layer filtration system, including primary sponge, filter cotton, activated carbon/ion exchange resin, and another filter cotton layer.

60 days power supply illustration

Image: Visual representation of the 60-day power supply, highlighting the 3000mAh battery and Type-C interface for charging.

Operating Modes

The oneisall cat fountain offers two operating modes to suit your pet's needs and conserve energy:

  • Detection Mode (Recommended):

    When your cat approaches within 80cm and an angle of 120°, the water will flow for 30 seconds. This mode is highly recommended as it encourages your cat to drink more by providing fresh water on demand, while also conserving battery life.

  • Intermittent Mode:

    In this mode, the water flows for 30 seconds every 10 minutes, regardless of pet presence. This mode is suitable if you prefer a consistent water flow throughout the day.

Sensor mode operation diagram

Image: Diagram illustrating the sensor mode, showing a cat approaching the fountain and the 120° detection angle, with text explaining water runs for 30s when cat approaches.

Maintenance

Regular maintenance is crucial for the longevity and hygiene of your pet's drinking fountain.

  • Daily: Check water level and refill as needed.
  • Weekly:
    • Clean the stainless steel reservoir and pump unit with mild soap and water. Rinse thoroughly.
    • Ensure no pet hair or debris is obstructing the pump or water flow.
  • Monthly (or as needed):
    • Replace the multi-layer filter system components (primary sponge, filter cotton, activated carbon/ion exchange resin).
    • Deep clean all parts of the fountain, including the pump impeller.

Note: The frequency of filter replacement may vary depending on the number of pets and water quality.

Troubleshooting

If you encounter any issues with your oneisall cat fountain, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
No water flow or weak flowLow water level, clogged filter, pump obstruction, low battery.Refill water, clean or replace filter, clean pump impeller, charge battery.
Fountain is noisyLow water level, pump not properly seated, debris in pump.Refill water, ensure pump is correctly installed, clean pump.
Water tastes or smells badDirty water, old filter.Clean fountain thoroughly, replace filter.
Motion sensor not workingSensor obstructed, low battery, incorrect mode.Clean sensor area, charge battery, ensure "Detection Mode" is active.

Specifications

FeatureDetail
Model NumberPTM
Capacity4 Liters
Material304 Stainless Steel
Power SourceBattery Operated (Wireless)
Battery TypeLithium-Ion (3000mAh)
Operating Time per ChargeUp to 60 Days
Noise Level<30dB
Product Dimensions26.60 x 19.90 x 12.20 cm
Net Weight1.28 kg
Product specifications including model, capacity, dimensions, and weight

Image: Table summarizing product specifications such as model number, capacity, net weight, dual mode, power supply, and physical dimensions.

Warranty and Support

Your oneisall 4L Wireless Cat Drinking Fountain comes with a 2-year warranty from the date of purchase. We also provide 24-hour customer service support to assist you with any questions or concerns.

If you have any questions about the product, need assistance with setup, operation, or troubleshooting, or wish to claim warranty service, please do not hesitate to contact us:

Please provide your purchase details and a description of the issue when contacting support for faster resolution.

© 2025 oneisall. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.