NOVAPARTS 68111384AB

NOVAPARTS Cruise Control Steering Wheel Switch User Manual

Model: 68111384AB

Product Overview

This manual provides detailed instructions for the installation, operation, and maintenance of the NOVAPARTS Cruise Control Steering Wheel Switch, model 68111384AB. This component is a direct replacement part designed to restore cruise control functions in compatible vehicles.

Front view of the NOVAPARTS Cruise Control Steering Wheel Switch

Figure 1: Front view of the NOVAPARTS Cruise Control Steering Wheel Switch, showing the "ON/OFF", "RES+", "SET-", "CANCEL", "GEAR-", and "GEAR+" buttons. The switch features a black finish with chrome trim.

The switch is designed for specific Dodge Ram 1500 models, ensuring a precise fit and reliable performance. It is manufactured from durable plastic and metal components, rigorously tested to meet OEM standards.

Compatibility

This cruise control steering wheel switch is compatible with the following vehicle models:

  • 2013-2018 Dodge Ram 1500
  • 2019-2024 Dodge Ram 1500 Classic (3.0L, 3.6L, 5.7L engine variants)

Replaces Part Numbers: 68111384AA, 601-608, CCA1384, V33800018.

NOVAPARTS Cruise Control Steering Wheel Switch installed on a steering wheel

Figure 2: Example of the cruise control switch integrated into a vehicle's steering wheel, demonstrating its intended placement and appearance.

Setup and Installation

Installation of the cruise control steering wheel switch requires basic automotive repair knowledge and tools. It is recommended to consult a professional mechanic if you are unsure about any steps.

Before You Begin:

  • Ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical hazards.
  • Gather necessary tools, which typically include screwdrivers, a trim removal tool, and a socket wrench set.
  • Refer to your vehicle's specific service manual for detailed instructions on steering wheel and airbag removal, as these steps can vary by model year.

Installation Steps:

  1. Disconnect Battery: Disconnect the negative terminal of the vehicle's battery. Wait at least 10 minutes for the airbag system to discharge.
  2. Remove Airbag Module: Carefully remove the airbag module from the steering wheel. This usually involves releasing clips or screws from the back or sides of the steering wheel. Handle the airbag with extreme care.
  3. Disconnect Old Switch: Locate the existing cruise control switch. Disconnect its electrical connector and remove any retaining screws or clips holding it in place.
  4. Install New Switch: Position the new NOVAPARTS cruise control switch (model 68111384AB) into the steering wheel housing. Ensure it seats correctly.
  5. Connect Electrical Connector: Reconnect the electrical connector to the new switch. Ensure a secure connection.
  6. Reinstall Airbag Module: Carefully reinstall the airbag module, ensuring all clips or screws are properly secured.
  7. Reconnect Battery: Reconnect the negative terminal of the vehicle's battery.
  8. Test Functionality: Start the vehicle and test the cruise control functions to ensure proper operation.
Back view of the NOVAPARTS Cruise Control Steering Wheel Switch showing the electrical connector

Figure 3: Rear view of the cruise control switch, highlighting the multi-pin electrical connector. This connector ensures proper communication with the vehicle's electrical system.

Operating Instructions

Once installed, the NOVAPARTS Cruise Control Steering Wheel Switch operates identically to the original equipment. Refer to your vehicle's owner's manual for specific details on cruise control system usage.

Basic Cruise Control Functions:

  • ON/OFF: Press this button to activate or deactivate the cruise control system. An indicator light on your dashboard typically illuminates when the system is active.
  • SET-: Once the system is on, drive to your desired speed and press "SET-" to set the current speed. The vehicle will maintain this speed.
  • RES+: If cruise control was disengaged (e.g., by pressing the brake), press "RES+" to resume the previously set speed.
  • CANCEL: Press this button to disengage cruise control without erasing the set speed from memory. Applying the brake pedal will also cancel cruise control.
  • GEAR+ / GEAR-: These buttons are typically used for manual gear selection in vehicles equipped with a manual shift mode on automatic transmissions, or for adjusting gear limits in certain driving modes. Consult your vehicle's manual for specific functionality.

Maintenance and Care

The NOVAPARTS Cruise Control Steering Wheel Switch is designed for long-term durability and requires minimal maintenance.

  • Cleaning: Clean the surface of the switch with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the plastic and button markings.
  • Inspection: Periodically inspect the switch for any signs of physical damage, loose connections, or unresponsive buttons.
  • Environmental Factors: While designed for automotive environments, extreme temperatures or excessive moisture should be avoided if possible, though this is typically managed by the vehicle's interior design.

Troubleshooting

If you experience issues with your cruise control switch, consider the following troubleshooting steps:

  • Cruise Control Not Engaging:
    • Ensure the "ON/OFF" button has been pressed to activate the system.
    • Check if the brake lights are stuck on, as a faulty brake light switch can prevent cruise control engagement.
    • Verify all electrical connections to the switch are secure.
    • Ensure vehicle speed is above the minimum required for cruise control activation (typically 25-30 mph).
  • Buttons Unresponsive:
    • Inspect the switch for any physical damage or debris lodged around the buttons.
    • If recently installed, recheck the electrical connector for proper seating.
  • Intermittent Operation:
    • This could indicate a loose connection or a more complex electrical issue within the vehicle's system. Professional diagnosis may be required.

If these steps do not resolve the issue, it is recommended to seek assistance from a qualified automotive technician.

Specifications

FeatureDetail
Model Number68111384AB (Replaces 68111384AA, 601-608, CCA1384, V33800018)
BrandNOVAPARTS
Operation ModeON-NONE-ON
Current Rating0.1 Amps
Operating Voltage12 Volts
Contact TypeNormally Open
Connector TypePlug In
MaterialPlastic & Metal
ColorBlack
Item Dimensions (L x W x H)3.35 x 2.56 x 1.57 inches
Item Weight1.76 ounces
What's in the Box1x Cruise Control Switch Standard

Warranty and Support

NOVAPARTS stands behind the quality of its products. This cruise control switch comes with a warranty period as detailed below:

  • Warranty Period: You can get a free replacement within 365 days if the product has any problems.

For any questions, technical assistance, or warranty claims, please contact NOVAPARTS customer service. We aim to reply to all inquiries within 24 hours.

Contact Information: Please refer to the seller's contact information on the platform where the product was purchased, or visit the official NOVAPARTS store page for support details.

Note: Warranty terms may vary based on region and retailer. Please retain your proof of purchase.

© 2025 NOVAPARTS. All rights reserved.

This manual is for informational purposes only. NOVAPARTS is not responsible for any damage or injury resulting from improper installation or use of this product.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.