NOCO AIR20 Portable Tire Inflator and Air Compressor User Manual

1. Introduction

The NOCO AIR20 is a high-performance 20-amp portable air compressor with a 280-watt motor, engineered for efficient and rapid inflation. It delivers a maximum pressure of 100 PSI (6.8 bar, 689 kPa) and a maximum flow rate of 47 SLPM (standard liters per minute) or 1.66 CFM (cubic feet per minute). This device is designed for ultra-fast tire inflation, capable of inflating tires from 0 to 40 PSI in approximately 2.5 minutes (based on a 205-65R16 95H tire) and can fully inflate up to five tires in a single duty cycle. Its intelligent features, including an integrated pressure sensor and advanced Dwell technology, ensure precise inflation by automatically pausing and resuming as the set pressure is achieved, preventing over-inflation.

The AIR20 is powered directly via a 12-volt battery connection using the included clamps. It also features a digital display for easy pressure setting between 15 and 100 PSI, with selectable units (PSI, kPa, bar). For versatility, a manual mode is available for inflating items below 15 PSI, such as sports balls, bicycle tires, and inflatable toys. The unit is suitable for vehicles with tires up to 35 inches and includes a 60-lumen LED flashlight with six light modes, including an SOS function, for enhanced safety and utility.

Figure 1: NOCO AIR20 highlighting its core specifications.

2. What's in the Box

Your NOCO AIR20 package includes the following components:

• NOCO AIR20 Portable 20A Tire Inflator
• 1-meter Braided Inflation Hose
• 6-meter 14 AWG Power Cable with Battery Clamps
• Presta Valve Adapter
• Needle Adapter
• Inflatable Nozzle Adapter
• Microfiber Storage Bag
• User Manual (this document)
• 1-Year Limited Warranty Information

Figure 2: All items included with your NOCO AIR20.

3. Setup

Follow these steps to set up your NOCO AIR20 for use:

1. Connect to Power Source: The AIR20 is powered by a 12-volt battery. Connect the red positive (+) clamp to the positive terminal of your vehicle's battery and the black negative (-) clamp to the negative terminal. Ensure a secure connection.
2. Attach Inflation Hose: Connect the braided inflation hose to the AIR20 unit. Ensure it is securely fastened to prevent air leaks.
3. Select Adapter: Choose the appropriate inflation adapter (Presta valve, needle, or inflatable nozzle) for the item you intend to inflate and attach it to the end of the inflation hose.
4. Power On: Press the power button on the AIR20 unit to turn it on. The digital display will illuminate.

Figure 3: NOCO AIR20 connected to a 12V battery.

Setup Demonstration Video

Video 1: A brief demonstration of the NOCO AIR20 product, showing its compact design and initial power-on sequence.

4. Operating Instructions

Operating the NOCO AIR20 is straightforward:

1. Set Desired Pressure: Use the digital display and control buttons to set your target pressure (between 15 and 100 PSI). You can switch between PSI, kPa, and bar units.
2. Connect to Item: Securely attach the inflation hose with the chosen adapter to the valve stem of the tire or inflatable item.
3. Start Inflation: Press the start button. The AIR20 will begin inflating and automatically stop once the preset pressure is reached, thanks to its Dwell technology.
4. Manual Mode: For items requiring less than 15 PSI, activate the manual mode. Monitor the pressure manually and stop inflation when desired.
5. Disconnect: Once inflation is complete, disconnect the hose from the item and then from the AIR20 unit. Disconnect the battery clamps from the power source.

Figure 4: Intuitive digital interface for precise pressure control.

Fast Inflation and Smart Pressure

The AIR20 is engineered for speed, capable of inflating a standard tire from 0 to 40 PSI in just 2.5 minutes. Its smart pressure system with Dwell technology ensures that inflation is precise and prevents over-inflation by automatically stopping at the set pressure.

Figure 5: Ultrafast inflation performance.

Figure 6: Smart Pressure with Auto-Shutoff and Dwell Technology.

Product in Detail Video

Video 2: Detailed overview of the NOCO AIR20, demonstrating its features and operation, including hose connection and pressure setting.

LED Flashlight Functionality

The integrated 60-lumen LED flashlight offers six modes, including a standard light, a less intense light, an intermittent light, and an SOS signal. To activate, press and hold the flashlight button for 3 seconds. Subsequent short presses will cycle through the modes. Press and hold again to turn off.

5. Maintenance

To ensure the longevity and optimal performance of your NOCO AIR20, follow these maintenance guidelines:

• Cleaning: Wipe the unit with a soft, damp cloth after each use to remove dirt and debris. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the AIR20 and its accessories in the provided microfiber storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Hose and Cable Inspection: Regularly inspect the inflation hose and power cable for any signs of wear, cracks, or damage. Replace if necessary.
• Adapter Care: Keep all inflation adapters clean and free of obstructions.

6. Troubleshooting

If you encounter issues with your NOCO AIR20, consider the following common troubleshooting steps:

• Unit Not Powering On: Ensure the battery clamps are securely connected to a 12V power source and that the battery has sufficient charge.
• No Airflow/Slow Inflation: Check that the inflation hose is securely attached to both the AIR20 and the item being inflated. Verify that the correct adapter is used and properly sealed. Ensure the vehicle's battery is providing adequate power.
• Inaccurate Pressure Reading: Make sure the hose is properly connected and there are no leaks. The digital gauge is calibrated for accuracy, but external factors can sometimes influence readings.
• Over-inflation: The AIR20 features automatic shut-off. If over-inflation occurs, ensure the desired pressure was set correctly before starting.

For persistent issues, please refer to the detailed troubleshooting section in the full product manual or contact NOCO customer support.

7. Specifications

8. Warranty and Support

Warranty Information

The NOCO AIR20 comes with a 1-year limited warranty. This warranty covers defects in material and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full details regarding warranty terms and conditions, refer to the warranty card included in your product packaging.

Customer Support

Should you require assistance with your NOCO AIR20, including technical support, troubleshooting, or warranty service, please contact NOCO customer support through their official website or the contact information provided in your product documentation. Always provide your model number (AIR20) and proof of purchase when contacting support.