Introduction
Thank you for choosing the EarFun Wave Pro Active Noise Canceling Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
What's in the Box
- EarFun Wave Pro Bluetooth Headphones
- Travel Case
- AUX Audio Cable
- USB-C Cable
- User Manual
Image: The EarFun Wave Pro headphones, showcasing their sleek black design, alongside their included travel case, AUX audio cable, and USB-C charging cable.
Setup
1. Initial Charging
Before first use, fully charge your EarFun Wave Pro headphones. Connect the provided USB-C cable to the charging port on the left earcup and the other end to a compatible USB power source. A full charge takes approximately 2 hours. A 10-minute quick charge provides up to 10 hours of playback.
2. Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the power button until the LED indicator flashes blue and red, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for "EarFun Wave Pro" in the list of available devices.
- Select "EarFun Wave Pro" to connect. The LED indicator will turn solid blue once connected.
3. EarFun App Installation
For enhanced control and customization, download the official EarFun Audio App. Search for "EarFun Audio" on the Google Play Store (for Android devices) or Apple App Store (for iOS devices) and install it. The app allows you to select noise canceling modes, customize touch controls, and adjust EQ settings.
Operating Instructions
1. Power On/Off
- Power On: Press and hold the power button for 2 seconds.
- Power Off: Press and hold the power button for 5 seconds.
2. Controls (Buttons)
The EarFun Wave Pro features physical buttons for intuitive control:
- Power Button: Power on/off, enter pairing mode.
- Volume Up (+): Increase volume.
- Volume Down (-): Decrease volume.
- ANC Button: Cycle through Noise Canceling modes (Normal, Ambient Sound, Wind Noise Canceling, Comfort ANC, Strong ANC).
3. Active Noise Cancellation (ANC) Modes
The headphones feature EarFun QuietSmart 2.0 ANC technology, offering up to 45dB noise reduction. Use the ANC button or the EarFun Audio App to switch between modes:
- Normal: ANC off.
- Ambient Sound: Allows you to hear your surroundings.
- Wind Noise Canceling: Specifically reduces wind interference.
- Comfort ANC: Balanced noise cancellation for extended wear.
- Strong ANC: Maximum noise cancellation (up to 45dB).
Image: Diagram illustrating the 45dB active noise cancellation capability of the EarFun Wave Pro headphones, highlighting internal and external microphones.
4. Multipoint Connection
The EarFun Wave Pro supports multipoint connection, allowing you to connect to two devices simultaneously. You can manage these connections via the EarFun Audio App or manually switch between devices.
Note: Multipoint connection and LDAC cannot be simultaneously enabled due to chip limitations. When LDAC is activated, the multipoint connection will automatically turn off, and vice versa.
5. Game Mode
Activate Game Mode via the EarFun Audio App for an extremely low latency of approximately 55ms, providing a synchronized audio-visual experience ideal for gaming and video playback.
6. Wired Connection
The headphones can be used in wired mode using the provided 3.5mm AUX audio cable. When connected via AUX, the headphones will automatically power off, disabling ANC, touch controls, and microphones.
Maintenance
1. Charging
Charge the headphones using the supplied USB-C cable. The LED indicator will show charging status. Ensure the charging port is clean and dry before connecting the cable.
Image: Visual representation of the EarFun Wave Pro's impressive battery life, showing 80 hours with ANC off, 55 hours with ANC on, and 10 hours from a 10-minute quick charge.
2. Cleaning
Wipe the headphones with a soft, dry cloth. Do not use harsh chemicals or abrasive materials. Keep the earcups clean to maintain sound quality and hygiene.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Headphones not powering on | Ensure headphones are charged. Press and hold the power button for 2 seconds. |
| Cannot pair with device | Ensure headphones are in pairing mode (flashing blue/red LED). Turn off and on Bluetooth on your device. Forget previous pairings and try again. |
| No sound or low volume | Check headphone and device volume levels. Ensure headphones are properly connected. Try re-pairing. |
| ANC not working effectively | Ensure ANC mode is activated. Adjust earcup fit for a proper seal. |
| LDAC playback interruption | Keep the using distance within 2 meters. Disable LDAC in the app settings if issues persist. |
| Multipoint connection issues | Ensure LDAC is disabled if using multipoint connection. Manage connections via the EarFun App. |
Specifications
- Model Name: EarFun Wave Pro (HP200)
- Noise Control: Active Noise Cancellation (up to 45dB)
- Audio Drivers: 40mm DLC Composite Dynamic Drivers
- Frequency Response: 20 Hz - 40,000 Hz
- Sensitivity: 100 dB
- Connectivity: Bluetooth 5.3, 3.5mm AUX Jack
- Bluetooth Codecs: LDAC, AAC, SBC
- Microphones: 5 Mics with AI Algorithms for Clear Calls
- Battery Life: Up to 80 hours (ANC off), 55 hours (ANC on)
- Charging: USB-C, 10-minute quick charge for 10 hours playback
- Low Latency (Game Mode): ~55ms
- Weight: 266 Grams (9.4 ounces)
- Dimensions: 6.81 x 6.26 x 2.05 inches
- Water Resistance: Not Water Resistant
Warranty and Support
EarFun products come with a standard warranty. For detailed warranty information, product support, or service inquiries, please visit the official EarFun website or contact their customer service directly. You can also refer to the official User Manual PDF available online for more in-depth information.
- Official User Manual (PDF): Download PDF
- EarFun Store: Visit EarFun Store on Amazon
