Introduction
This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your MageGee SKY98 Wireless Gasket Mechanical Gaming Keyboard. Please read this manual thoroughly to ensure optimal performance and longevity of your device.
Figure 1: MageGee SKY98 Wireless Gasket Mechanical Gaming Keyboard (Lavender/Violet Switch variant).
Package Contents
Verify that all items listed below are included in your package:
- Wireless Creamy Mechanical Keyboard
- 8 Five-Sided Thermal Sublimation Keycaps
- 4 Additional Linear Switches
- USB Cable
- Key Puller & User Manual
Figure 2: All components included in the MageGee SKY98 keyboard package.
Setup
1. Connectivity Modes
The SKY98 keyboard supports three connection modes: wired USB-C, 2.4G wireless, and Bluetooth 5.0. A toggle switch located on the side of the keyboard allows for easy switching between these modes.
- Wired Mode: Connect the keyboard to your device using the provided USB-C cable. This mode offers a stable and reliable connection.
- 2.4G Wireless Mode: Insert the 2.4G USB receiver into an available USB port on your computer. The keyboard will automatically connect. This mode is driver-free.
- Bluetooth 5.0 Mode:
- Switch the toggle to Bluetooth mode.
- On your device (PC, laptop, smartphone, tablet), enable Bluetooth and search for new devices.
- Select "MageGee SKY98" from the list of available devices to pair.
- The keyboard can connect to up to 5 devices simultaneously via Bluetooth.
Figure 3: Illustration of the three available connection methods for the SKY98 keyboard.
Figure 4: The keyboard supports connectivity with various devices.
2. Battery Charging and Status
The SKY98 keyboard features a built-in 3000 mAh battery. When fully charged, it can provide approximately 16 hours of usage with the backlighting on. To check the current battery level, press the FN + Backspace keys simultaneously. The indicator lights will show the approximate charge level.
Figure 5: How to check the keyboard's battery level.
Operating Instructions
1. RGB Backlighting Control
The keyboard features 18 distinct RGB backlighting modes. You can customize the lighting effects using the following key combinations:
- FN + \|: Switch between 18 different light modes.
- FN + ↑ / ↓: Adjust backlighting brightness.
- FN + ← / →: Adjust backlighting speed.
- FN + Home: Switch light colors.
- FN + DEL: Turn the backlight on or off to conserve power.
Figure 6: RGB backlighting controls and effects.
2. N-Key Rollover (NKRO)
The SKY98 keyboard supports 100% anti-ghosting with N-Key Rollover. This feature ensures that every keystroke is registered accurately, even when multiple keys are pressed simultaneously. This is particularly beneficial for fast-paced gaming and typing.
Figure 7: N-Key Rollover ensures all keystrokes are registered.
3. Hot-Swappable Switches
The SKY98 keyboard features hot-swappable sockets, allowing you to easily change mechanical switches without soldering. It is compatible with both 3-pin and 5-pin switches. This enables personalization of your typing experience.
To replace a switch:
- Use the provided keycap puller to remove the desired keycap.
- Use the provided switch puller to gently remove the switch from its socket.
- Align the pins of the new switch with the holes in the PCB and press firmly until it clicks into place.
- Reattach the keycap.
The keyboard comes with pre-lubricated Violet switches, designed for a smooth and responsive typing feel with a lifespan of up to 70 million keystrokes.
Figure 8: The hot-swappable design allows for easy switch replacement.
Figure 9: Detail of hot-swappable keycaps and the tri-mode switch.
Figure 10: Specifications of the pre-lubricated Violet switches.
4. Sound Absorbing Features
The SKY98 keyboard is engineered with a gasket-mounted structure and a 5-layer sound absorbing filling to minimize typing noise and enhance the acoustic experience. The gasket mount prevents direct contact between the interior components and the keyboard casing, providing a softer and more elastic typing feel.
The 5-layer filling consists of:
- IXPE foam pad
- PORON foam
- Diaphragm
- EVA soundproofing foam
- Silicone absorbing pad
These layers work together to reduce internal resonance and hollow sounds, resulting in a more pleasant and quiet typing sound.
Figure 11: Gasket-mounted structure for reduced noise.
Figure 12: The 5-layer sound absorbing filling components.
Figure 13: The comprehensive silencing structure of the keyboard.
5. Ergonomic Design
The SKY98 keyboard features adjustable feet, allowing you to set the typing angle to your preference for improved ergonomic comfort during extended use.
Figure 14: Adjustable feet for ergonomic typing angles.
Maintenance
To ensure the longevity and optimal performance of your MageGee SKY98 keyboard, follow these maintenance guidelines:
- Cleaning: Regularly clean the keycaps and keyboard surface with a soft, dry, lint-free cloth. For deeper cleaning, you can remove keycaps using the provided keycap puller and clean underneath with compressed air or a small brush.
- Avoid Liquids: Do not expose the keyboard to liquids. In case of accidental spills, immediately disconnect the keyboard and allow it to dry completely before reconnecting.
- Storage: When not in use for extended periods, store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures.
- Switch Care: While switches are hot-swappable, avoid frequent removal unless necessary to prevent wear on the sockets.
Troubleshooting
If you encounter issues with your MageGee SKY98 keyboard, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Keyboard not responding (Wired) | Loose cable connection, faulty USB port. | Ensure USB-C cable is securely connected to both keyboard and computer. Try a different USB port or cable. |
| 2.4G Wireless not connecting | USB receiver not inserted, interference, low battery. | Ensure 2.4G receiver is fully inserted. Move closer to the receiver. Charge the keyboard. Check the toggle switch is in 2.4G mode. |
| Bluetooth pairing issues | Keyboard not in pairing mode, device Bluetooth off, interference. | Ensure keyboard toggle is in Bluetooth mode. Turn Bluetooth off and on again on your device. Remove previous pairings and re-pair. Charge the keyboard. |
| Backlighting not working or dim | Backlight turned off, brightness set too low, low battery. | Press FN + DEL to toggle backlight. Press FN + ↑ to increase brightness. Charge the keyboard. |
| Keys not registering (ghosting) | Software conflict, physical obstruction. | Restart your computer. Ensure no debris is under the keycaps. If a specific key is not working, consider hot-swapping the switch. |
Specifications
Key technical specifications for the MageGee SKY98 Wireless Gasket Mechanical Gaming Keyboard:
| Feature | Detail |
|---|---|
| Model | SKY98 |
| Connectivity | BT/2.4G/USB-C (Tri-Mode) |
| Keyboard Layout | 96% (99 Keys) |
| Switch Type | Violet Switch (Pre-lubed, Linear) |
| Hot-Swappable | Yes (3-pin/5-pin compatible) |
| Mounting Style | Gasket Mount |
| Sound Dampening | 5-Layer Sound Absorbing Filling (IXPE, PORON, Diaphragm, EVA, Silicone) |
| Backlighting | RGB (18 modes) |
| Battery Capacity | 3000 mAh |
| N-Key Rollover | 100% Anti-Ghosting |
| Compatible Devices | Laptop, PC, Smartphone, Tablet |
| Operating System Support | Windows, Mac |
| Item Weight | 2.79 pounds |
| Package Dimensions | 16.02 x 7.36 x 2.13 inches |
Figure 15: Physical dimensions of the keyboard.
Warranty and Support
For warranty information, technical support, or further inquiries, please refer to the official MageGee website or contact their customer service directly. Details can typically be found on the product packaging or the manufacturer's official online resources.
