1. Safety Instructions
Please read all safety instructions carefully before operating the Setpower PT30 portable refrigerator. Failure to follow these instructions may result in product damage or personal injury.
- Ensure the power supply voltage matches the refrigerator's requirements (12V/24V DC or 100-240V AC).
- Do not immerse the refrigerator in water or expose it to heavy rain.
- Keep ventilation openings clear of obstructions to prevent overheating.
- Avoid placing the refrigerator in direct sunlight for extended periods.
- Do not use abrasive cleaners or sharp objects inside the unit.
- Unplug the unit before cleaning or performing any maintenance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Product Overview
The Setpower PT30 is a 32-quart dual-zone portable refrigerator designed for versatile use in vehicles, RVs, trucks, and during camping or road travel. It features independent temperature control for two separate compartments, allowing simultaneous refrigeration and freezing.
Figure 2.1: Setpower PT30 Dual Zone Portable Refrigerator with contents and app control.
Key Features:
- Dual Zone & Dual Control: Independently set temperatures for two compartments from -4℉ to 50℉.
- App Control: Manage settings wirelessly via a smartphone app within a 10-meter range.
- Fast Cooling: Cools from 68℉ to 32℉ in approximately 15 minutes.
- Energy Efficient: ECO mode consumes only 28W; MAX mode consumes 38W.
- Low Noise Operation: Operates at less than 35dB.
- Anti-tilt Design: Maintains operation on inclines up to 40 degrees.
- Multiple Power Options: Compatible with 12V/24V DC and 100-240V AC power sources.
3. Package Contents
Upon unpacking, please verify that all items listed below are included:
- Setpower PT30 Portable Refrigerator
- AC Adapter (100-240V)
- DC Power Cord (12V/24V)
- User Manual (this document)
4. Setup
4.1 Initial Preparation
- Unpack the refrigerator and remove all packaging materials.
- Clean the interior and exterior of the unit with a damp cloth before first use.
- Place the refrigerator on a stable, level surface, ensuring adequate ventilation around the unit.
4.2 Power Connection
The PT30 can be powered by either AC (household) or DC (vehicle) power sources.
- AC Power (100-240V): Connect the AC adapter to the refrigerator's AC input port, then plug the adapter into a standard wall outlet.
- DC Power (12V/24V): Connect the DC power cord to the refrigerator's DC input port, then plug the other end into your vehicle's cigarette lighter socket or a compatible 12V/24V power source.
Figure 4.1: Multiple power options for the Setpower PT30.
4.3 App Download and Connection
The Setpower PT30 supports app control for convenient remote operation.
- Scan the QR code provided in the physical user manual or search for the 'Setpower' app in your smartphone's app store.
- Install the application on your device.
- Ensure your refrigerator is powered on and Bluetooth is enabled on your smartphone.
- Open the app and follow the on-screen instructions to pair your device with the PT30 refrigerator.
Figure 4.2: Controlling the Setpower PT30 via the smartphone app.
5. Operating Instructions
5.1 Control Panel Overview
The control panel is located on the top of the unit for easy access. It features an LCD display and several buttons for temperature adjustment and mode selection.
Figure 5.1: Control panel with dual temperature displays and mode selection.
5.2 Temperature Setting (Dual Zone)
The PT30 allows independent temperature control for its two zones.
- Press the power button to turn on the unit.
- Use the '+' or '-' buttons corresponding to each zone (left or right) to adjust the desired temperature. The temperature range is -4℉ to 50℉.
- The LCD display will show the current temperature of each zone.
5.3 Mode Selection (ECO/MAX)
Choose between ECO mode for energy saving or MAX mode for rapid cooling.
- Press the 'MODE' button on the control panel to toggle between ECO and MAX modes.
- ECO Mode: Optimized for lower power consumption (approx. 28W). Ideal for maintaining temperature over longer periods.
- MAX Mode: Provides faster cooling performance (approx. 38W). Recommended for initial cooling or when rapid temperature reduction is needed.
Figure 5.2: ECO and MAX power modes.
5.4 Battery Protection Settings
The PT30 features a 3-level battery protection system to prevent your vehicle's battery from draining.
- Access the battery protection settings via the control panel or the smartphone app.
- Select from High, Medium, or Low protection levels. The refrigerator will automatically cut off power if the input voltage drops below the set threshold.
Figure 5.3: Battery protection level settings.
6. Maintenance
6.1 Cleaning
- Always unplug the refrigerator before cleaning.
- Clean the interior and exterior surfaces with a soft cloth dampened with mild detergent and water.
- Do not use abrasive cleaners, solvents, or harsh chemicals.
- Ensure the unit is completely dry before reconnecting power.
6.2 Defrosting
The Setpower PT30 features an automatic defrost system. However, if excessive ice buildup occurs, manual defrosting may be necessary.
- Turn off the refrigerator and unplug it from the power source.
- Remove all contents.
- Leave the lid open to allow ice to melt naturally.
- Wipe away melted water with a clean cloth. Do not use sharp objects to remove ice.
- Ensure the interior is completely dry before restarting the unit.
6.3 Storage
When storing the refrigerator for an extended period:
- Clean and dry the unit thoroughly.
- Leave the lid slightly ajar to prevent odors and mold growth.
- Store in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your Setpower PT30, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Refrigerator not turning on | No power supply; loose connection; blown fuse. | Check power cord connection; verify power outlet/vehicle socket; check vehicle fuse. |
| Insufficient cooling | Temperature setting too high; ventilation blocked; excessive contents; lid not closed properly. | Adjust temperature lower; clear vents; reduce contents; ensure lid is sealed. |
| Unit making unusual noise | Unit not level; fan obstruction; compressor issue. | Place on a level surface; check for debris near fan; if noise persists, contact support. |
| App not connecting | Bluetooth off; app not updated; refrigerator not powered on; out of range. | Ensure Bluetooth is on; update app; power on refrigerator; move closer to unit. |
| Error code on display | Specific internal fault. | Refer to the app or contact Setpower customer support with the error code. |
8. Specifications
Detailed technical specifications for the Setpower PT30 portable refrigerator.
| Feature | Specification |
|---|---|
| Brand | Setpower |
| Model | PT30 |
| Capacity | 32 Quarts |
| Product Dimensions | 26.77 x 13.39 x 14.96 inches (68 x 34 x 38 cm) |
| Item Weight | 30 pounds (13.6 kg) |
| Voltage | 12V/24V DC, 100-240V AC |
| Temperature Range | -4℉ to 50℉ (-20℃ to 10℃) |
| Power Consumption (ECO Mode) | ~28W |
| Power Consumption (MAX Mode) | ~38W |
| Noise Level | <35dB |
| Defrost System | Automatic |
| Special Features | Anti-Shake, App Control, Digital Temperature Control, Portable |
9. Warranty & Support
Setpower is committed to providing reliable products and excellent customer service.
9.1 Warranty Information
- Compressor: 3-year technical support.
- All Other Parts: 1-year maintenance.
Please retain your proof of purchase for warranty claims.
9.2 Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Setpower customer support. Refer to the contact information provided in your product packaging or on the official Setpower website.
Figure 9.1: Setpower's commitment to professional support and warranties.
