Graco Ready2Jet Travel System: Compact Stroller and SnugRide Infant Car Seat User Manual

Introduction

This manual provides essential instructions for the safe and proper use, assembly, and maintenance of your Graco Ready2Jet Travel System. This system includes a compact stroller and a Graco SnugRide Lite Infant Car Seat, designed for infants from 4-30 lb and up to 30 inches. Please read all instructions carefully before use and retain this manual for future reference.

Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Always secure your child with the harness system.
• Never leave your child unattended in the stroller or car seat.
• Ensure the stroller is fully open and locked before placing a child in it.
• Do not overload the storage basket or attach items to the handle, as this may cause the stroller to become unstable.
• Always engage the brakes when the stroller is stationary.
• Refer to the separate Graco SnugRide Lite Infant Car Seat manual for complete car seat safety and installation instructions.

For detailed safety guidelines, always consult the full product manual included with your purchase.

What's in the Box

Your Graco Ready2Jet Travel System package includes:

• Graco Ready2Jet Compact Stroller
• Graco SnugRide Lite Infant Car Seat
• Removable Belly Bar
• Parent Cup Holder
• Storage Basket (integrated)

Image: The Graco Ready2Jet Travel System components, including the stroller, infant car seat, and the stroller in its compact folded state.

Setup

1. Attaching the Wheels

The stroller comes partially assembled. You will need to attach the front and rear wheels.

1. Locate the wheel assemblies.
2. Align each wheel with its corresponding axle on the stroller frame.
3. Push firmly until you hear a click, indicating the wheel is securely locked in place.

2. Attaching the Belly Bar

The removable belly bar provides an additional safety barrier and can also serve as a carry handle when the stroller is folded.

1. Locate the attachment points on both sides of the stroller seat.
2. Align the belly bar with these points and push until it clicks into place.

3. Attaching the Parent Cup Holder

The parent cup holder can be attached to either side of the stroller handle.

1. Locate the designated slot on the side of the handle.
2. Slide the cup holder onto the slot until it is secure.

Video: A demonstration of the easy assembly process for the Graco Ready2Jet Stroller, including attaching wheels, the belly bar, and the cup holder.

Operating Instructions

1. Automatic Folding and Unfolding

The Ready2Jet stroller features a one-hand automatic fold mechanism for convenience.

1. To Fold: Locate the button and lever on the stroller handle. Simultaneously press the button and pull the lever, then gently push the handle forward. The stroller will automatically fold into a compact, self-standing position.
2. To Unfold: Release the locking mechanism (if engaged) and lift the handle. The stroller will extend and lock into its open position.

Image: Step-by-step visual guide demonstrating the one-hand automatic folding mechanism of the stroller.

Video: A user demonstrates the ease of folding and unfolding the Graco Ready2Jet Stroller with one hand.

2. Adjusting the Seat Recline

The multi-position reclining seat ensures your child's comfort.

1. Locate the recline strap mechanism on the back of the seat.
2. Squeeze the buckle to loosen the strap and recline the seat.
3. Pull the strap to bring the seat to a more upright position.

3. Harness Adjustment

The 5-point harness system can be adjusted to a 3-point system as your child grows.

1. To adjust shoulder strap height, re-thread the straps through the appropriate slots in the seat back.
2. To convert to a 3-point harness, detach the shoulder straps from the waist straps.
3. Ensure all buckles are securely fastened before each use.

4. Canopy Operation

The UV 50 oversized canopy provides ample shade and protection.

1. Pull the canopy forward to extend it for maximum coverage.
2. Push the canopy back to retract it.

Image: An overview of the stroller's key features, including the canopy, seat adjustments, and other functional elements.

5. Engaging the Brakes

The stroller is equipped with a one-foot tap brake for secure stopping.

1. To engage the brake, press down firmly on the brake pedal located near the rear wheels.
2. To release the brake, lift the pedal upwards.

6. Using the Storage Basket

An easy-access storage basket is located underneath the seat for essentials.

• Do not exceed the maximum weight limit specified in the specifications section.
• Ensure items are securely placed and do not interfere with the stroller's folding mechanism or wheel movement.

Maintenance

Cleaning Instructions

• Fabric Parts: Machine wash removable fabric components on a gentle cycle with cold water. Do not bleach. Hang dry.
• Frame: Wipe the frame with a damp cloth and mild soap. Dry thoroughly.
• Wheels: Periodically clean wheels and axles to remove dirt and debris. Lubricate moving parts as needed.

Troubleshooting

If you encounter any issues with your Graco Ready2Jet Travel System, please refer to the following general tips:

• Stroller not folding/unfolding smoothly: Ensure all components are clear of obstructions and that the locking mechanisms are properly aligned.
• Wheels not turning freely: Check for debris caught in the wheels or axles. Clean and lubricate as necessary.
• Harness not securing: Verify that all straps are correctly threaded and buckles are fully engaged. Adjust strap length for a snug fit.

For more specific issues, please contact Graco customer support or consult the detailed manual.

Specifications

Warranty and Support

For warranty information, product registration, or further assistance, please visit the official Graco website or contact their customer service department. Keep your purchase receipt as proof of purchase.

You can also visit the Graco Store on Amazon for more product details and support resources.