Introduction
Thank you for choosing the Dangbei Gimbal Projector Stand. This stand is designed to provide a stable and adjustable platform for your projector, enhancing your viewing experience. Constructed from high-quality aluminum alloy, it offers durability and supports devices up to 11 lbs (5 kg). This manual provides essential information for proper setup, operation, and maintenance of your projector stand.
Important Safety Information
- Ensure the stand is placed on a stable, level surface to prevent tipping.
- Do not exceed the maximum supported weight of 11 lbs (5 kg).
- Keep the stand away from water or excessive moisture.
- Avoid placing the stand in direct sunlight or near heat sources.
- Do not attempt to disassemble or modify the stand, as this may void the warranty and cause damage.
- Keep out of reach of children and pets.
Package Contents
Please check the package for the following items:
- Dangbei Gimbal Projector Stand (Main Unit)
- User Manual (This Document)
- Note: Projector not included.
Setup Instructions
The Dangbei Gimbal Projector Stand features a quick 2-step assembly process.
- Unpack the Stand: Carefully remove all components from the packaging.
- Attach Projector: Align the standard 1/4" screw on the stand with the mounting hole on your projector (or compatible device). Rotate the projector clockwise until it is securely fastened to the stand. Ensure the connection is firm but do not overtighten.
Image: The Dangbei Gimbal Projector Stand with a projector securely mounted, illustrating the assembled unit. The stand features a sturdy base and two supporting arms, holding the projector at an angle.
Operating Instructions
The Dangbei Gimbal Projector Stand allows for flexible positioning of your projector.
- Placement: Position the stand on a flat, stable surface where you intend to project.
- Adjusting Tilt: The stand features an adjustable tilt range exceeding 180 degrees. Gently hold your projector and adjust its angle to achieve the desired projection position, including ceiling projection. The gimbal mechanism will hold the projector in place once adjusted.
- Compatibility: The standard 1/4" screw makes this stand compatible with Dangbei DBOX02, DBOX01, DBX3 Pro projectors, as well as other projectors, cameras, and lights that feature a compatible mounting thread.
Maintenance
- Cleaning: Wipe the stand with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the stand in a cool, dry place away from direct sunlight.
- Inspection: Periodically check all connections and components for any signs of wear or damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is unstable. | Uneven surface; projector weight exceeds limit; projector not securely attached. | Place on a flat, stable surface. Ensure projector weight is within 11 lbs (5 kg). Tighten the 1/4" screw securely. |
| Projector angle does not hold. | Projector is too heavy; gimbal mechanism may be worn or damaged. | Verify projector weight is within specifications. If the issue persists and the projector is within weight limits, contact customer support. |
| Stand appears damaged. | Physical impact; manufacturing defect. | Discontinue use. Contact customer support for assistance. |
Specifications
- Dimensions (L*W*H): 278 x 217 x 197 mm (approx. 10.94 x 8.54 x 7.76 inches)
- Net Weight: 4.4 lbs (2 kg)
- Maximum Supported Weight: 11 lbs (5 kg)
- Material: High-quality Aluminum Alloy
- Mounting Screw: Standard 1/4"
- Adjustable Tilt: Exceeds 180 degrees
- Compatible Devices: Dangbei DBOX02, DBOX01, DBX3 Pro Projectors, and other devices with a 1/4" mounting thread.
Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Dangbei website. You may also contact Dangbei customer service directly for assistance with product issues or inquiries.
Website: www.dangbei.com
Email: support@dangbei.com
