Gillaway Q21 5000A Portable Car Jump Starter and Air Compressor User Manual

1. Important Safety Information

Please read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Always wear eye protection when jump starting a battery.
• Do not expose the jump starter to rain or wet conditions.
• Do not operate the jump starter if it has been dropped or damaged.
• Keep out of reach of children.
• Ensure proper polarity connection (red clamp to positive, black clamp to negative) to avoid sparks or damage.
• Do not attempt to jump start a frozen battery.
• Remove the jump starter from the vehicle battery within 30 seconds after the vehicle starts.
• Do not use the air compressor continuously for more than 10 minutes to prevent overheating. Allow it to cool down before further use.

2. Product Overview

The Gillaway Q21 is a versatile device combining a powerful car jump starter with a 150PSI air compressor. It also functions as a portable power bank and features an LED flashlight.

Image: The Gillaway Q21 portable jump starter and air compressor unit, showing its compact design, digital display, control buttons, and included jumper cables.

2.1 Package Contents

Verify that all items are present in your package:

Image: Contents of the Gillaway Q21 package, including the jump starter unit, extended jumper cables, USB charging cable, EVA carrying case, user manual, and air tube with various nozzles.

1. Gillaway Q21 Jump Starter Unit
2. Extended Jumper Cables
3. USB Charging Cable
4. EVA Carrying Case
5. User Manual (this document)
6. Air Tube with Nozzles

2.2 Product Features

• 5000A Peak Current: Capable of jump starting various vehicles, including cars, SUVs, trucks, and motorcycles.
• 150PSI Air Compressor: For inflating tires, sports balls, and other inflatables.
• Portable Power Bank: Equipped with USB output ports to charge mobile devices.
• 3-in-1 LED Flashlight: Features steady, strobe, and SOS modes for emergencies.
• Advanced Protection Chip: Incorporates multiple safety protections including over-charge, short-circuit, low-temp, over-voltage, reverse charge, over-current, reverse polarity, high-temp, over-load, and spark-proof.

3. Setup and Charging

3.1 Initial Charging

Before first use, fully charge the Gillaway Q21 unit. Use the provided USB charging cable to connect the unit to a USB wall adapter (not included) or a powered USB port. The digital display will indicate the charging status.

• A full charge typically takes several hours.
• It is recommended to fully charge the unit every 3-6 months to maintain battery health, even if not in use.

4. Operating Instructions

4.1 Jump Starting a Vehicle

Follow these steps carefully to jump start your vehicle:

Image: A four-step visual guide demonstrating how to jump start a car using the Gillaway Q21, showing cable connection and engine start.

1. Connect Jumper Cables: Insert the blue end of the jumper cable into the jump starter's EC5 port. Ensure a secure connection.
2. Attach Clamps to Battery: Connect the red clamp to the positive (+) terminal of the vehicle battery and the black clamp to the negative (-) terminal. Ensure the clamps make good contact with the battery terminals.
3. Start Vehicle: Return to your vehicle and start the engine.
4. Remove Clamps: Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect the cables from the jump starter.

Important Note: Do not leave the jumper cables connected to the vehicle battery for more than 30 seconds after the engine starts.

4.2 Using the Air Compressor

The integrated air compressor can inflate tires and other items up to 150 PSI.

Image: The Gillaway Q21 unit connected to a car tire valve, demonstrating its use as a 150PSI fast inflator for bikes, balls, and cars.

1. Connect Air Tube: Screw the air tube securely into the inflation port on the jump starter.
2. Attach Nozzle: Select the appropriate nozzle for your item (tire, ball, etc.) and attach it to the other end of the air tube.
3. Connect to Item: Connect the nozzle to the valve stem of the item you wish to inflate.
4. Set Pressure: Use the '+' and '-' buttons on the unit to set the desired pressure (PSI, BAR, KPA, kg/cm²). The display will show the current pressure.
5. Start Inflation: Press the inflation button to begin inflation. The compressor will automatically stop when the preset pressure is reached.
6. Disconnect: Disconnect the nozzle and air tube.

Caution: Do not over-inflate. Check the recommended pressure for your item. Allow the unit to cool down after 10 minutes of continuous use.

4.3 Using as a Portable Power Bank

The Gillaway Q21 can charge various USB-powered devices.

Image: The Gillaway Q21 unit charging a smartphone, smartwatch, and wireless earbuds, illustrating its function as a portable power bank with 16000mAh capacity.

• Connect your device's USB charging cable to one of the USB output ports on the Gillaway Q21.
• The unit will automatically begin charging your device.
• Output specifications: USB1: 5V/3A, USB2: 5V/3A 9V/2A 12V/1.5A.

4.4 Using the LED Flashlight

The unit includes a multi-mode LED flashlight for illumination and emergency signaling.

Image: The Gillaway Q21 unit with its LED flashlight illuminated, showing its use in various scenarios like camping, car repair, and general illumination, highlighting its flash, strobe, and SOS light functions.

• Press the LED button once to turn on the steady flashlight.
• Press again for strobe mode.
• Press a third time for SOS signal mode.
• Press a fourth time to turn off the flashlight.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Gillaway Q21.

• Charging: Recharge the unit every 3-6 months, even if not in use, to prevent deep discharge and extend battery life.
• Cleaning: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its carrying case for protection.
• Temperature Range: Optimal operating temperature is between -4°F (-20°C) and 140°F (60°C).

6. Troubleshooting

If you encounter issues with your Gillaway Q21, refer to the following common problems and solutions:

7. Specifications

8. Warranty and Support

Gillaway products are designed for reliability and performance. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided with your purchase or visit the official Gillaway website.

Please retain your proof of purchase for warranty claims.