Product Overview
The addlon Floor Lamp is a versatile lighting solution designed to enhance your living space with both illumination and functionality. It integrates a floor lamp with a convenient storage cabinet, equipped with charging capabilities. This manual provides detailed instructions for assembly, operation, and maintenance to ensure optimal performance and longevity of your product.
Figure 1: Overall view of the addlon Floor Lamp, showcasing its integrated design with a lamp, shelves, and a storage cabinet.
Setup and Assembly
Please follow these steps carefully for proper assembly. It is recommended to watch the provided installation video for visual guidance.
Video 1: Detailed installation guide for the addlon Floor Lamp.
- Unpack and Identify Components: Carefully unpack all parts and hardware. Refer to the product list diagram to ensure all components are present and undamaged.
- Assemble the Wooden Cabinet Base: Attach the wooden side panels to the main wooden base using the provided screws and wrench. Ensure all connections are secure but do not fully tighten screws until instructed.
- Attach Metal Frames to Cabinet: Secure the metal frames to the assembled wooden cabinet base. Pay attention to the orientation of the frames and the screw holes. Again, tighten screws partially.
- Assemble Upper Lamp Structure: Connect the vertical metal poles and the upper wooden shelf (part B) to form the upper section of the lamp. Ensure the counterbore on part B faces upwards.
- Install Light Socket and Shade: Insert the light socket and wire assembly into the designated hole on the top shelf. Attach the lampshade frame and fabric, ensuring the buckle is correctly oriented. Screw in the provided 3CCT LED bulb.
- Cable Management: Use the provided clips to neatly secure the power cord along the lamp's frame, preventing tangles and ensuring safety.
Figure 2: Close-up of the 3CCT LED bulb, the flip-top storage cabinet, and the internal storage compartment.
Operating Instructions
Lighting Functionality
The lamp features a 3CCT (Correlated Color Temperature) LED bulb, allowing you to select from three different light temperatures: 3000K (Warm White), 4500K (Cool White), and 6000K (Daylight). To change the color temperature, simply pull the chain switch repeatedly until your desired setting is achieved. The lamp will remember your last setting if left off for at least 10 seconds.
Figure 3: Visual representation of the three selectable color temperatures.
Charging Station
The lamp is equipped with 2 USB ports and 1 power outlet located on one of the shelves. These ports allow you to conveniently charge your electronic devices such as phones, tablets, and laptops directly from the lamp. The charging function operates independently of the lamp's light, meaning you can charge devices even when the light is off.
Figure 4: Detail of the integrated charging station with USB ports and power outlet.
Flip-Top Storage Cabinet
The lamp features a flip-top storage cabinet designed for organizing small items like remotes, charging cables, or other essentials. The lid opens smoothly upwards for easy access, and soft-close buffer strips ensure quiet operation.
Figure 5: The flip-top storage cabinet provides discreet storage for various items.
Maintenance
- Cleaning: Dust the lamp regularly with a soft, dry cloth. For deeper cleaning, wipe surfaces with a slightly damp cloth and mild detergent, then dry immediately. Avoid abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged before replacing the LED bulb. Use only E26 base LED bulbs with a maximum wattage of 9W.
- Cord Care: Periodically check the power cord for any signs of damage. If the cord is damaged, discontinue use and contact customer support.
- Tighten Connections: Over time, screws may loosen. Periodically check and tighten all assembly screws to maintain stability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. | Lamp is not plugged in; bulb is loose or faulty; pull chain is not activated. | Ensure the lamp is securely plugged into a working outlet. Check if the bulb is screwed in tightly. Pull the chain switch firmly to cycle through settings. Replace bulb if necessary. |
| Devices are not charging via USB/outlet. | Lamp is not plugged in; device cable is faulty; device is incompatible. | Verify the lamp is plugged into a live power source. Try a different charging cable or device to rule out cable/device issues. |
| Lamp feels unstable or wobbly. | Assembly screws are loose. | Carefully inspect all assembled joints and tighten any loose screws using the provided wrench. |
Specifications
- Model Name: AD-02-V
- Brand: addlon
- Product Dimensions: 20.67"D x 11.02"W x 66.14"H
- Item Weight: 20.72 Pounds
- Lamp Type: Floor Lamp
- Shade Material: Linen
- Base Material: Wood
- Light Source Type: LED
- Wattage: 9 watts
- Special Features: 1 Power Outlet, 2 USB Ports, 3CCT (Color Temperature Change), Storage Cabinet
- Control Method: Pull Chain
- Room Type: Bedroom, Living Room, Office
- Included Components: Bulb, Shade
Warranty and Support
At addlon Lighting, we are committed to your satisfaction. This product comes with a comprehensive 2-year product support. If you encounter any issues or have questions regarding your addlon Floor Lamp, please do not hesitate to contact our dedicated customer service team. We are here to assist you.
For support, please visit the addlon Store on Amazon or refer to your purchase documentation for direct contact information.
