Product Overview
The Upgrow IP66 Double Outdoor Socket with Switch is designed for reliable electrical connections in various environments. Its robust construction ensures protection against water and dust, making it suitable for outdoor and damp locations.
- Waterproof Design: Features an IP66 rating, providing protection against strong jets of water and dust ingress.
- Deep Socket Design: With a depth of 34mm, it accommodates various conventional plugs, ensuring full insertion and secure connection.
- Individual Switches: Each socket has a separate built-in switch for convenient and safe control of power to individual outlets.
- Comprehensive Accessories: Includes all necessary installation hardware such as screws, wall plugs, waterproof connection sleeves, and a voltage tester/screwdriver.
- Versatile Application: Ideal for gardens, exterior walls, bathrooms, kitchens, basements, laundry rooms, garages, and workshops.
- Safety Features: Rated for 220V-250V, 16A, with an insulation resistance of 50 MΩ, ensuring safe operation. The lockable cover prevents unauthorized access.
Figure 1: Front view of the Upgrow IP66 Double Outdoor Socket with its protective cover closed.
Figure 2: The IP66 waterproof rating ensures the socket functions reliably even in rainy conditions, as shown on an exterior wall.
Setup and Installation
Before beginning installation, ensure the main power supply is turned off at the circuit breaker to prevent electrical shock. It is recommended that installation be performed by a qualified electrician.
Included Components:
- 1x Upgrow IP66 Double Outdoor Socket
- 4x Black oval floor plugs
- 4x Grey cover plugs
- 4x Pointed screws
- 4x Flat screws
- 4x Expansion screws (wall plugs)
- 2x Black waterproof connection sleeves
- 1x Double-sided electrical voltage tester/screwdriver
Figure 3: Product dimensions (168mm x 105mm x 98mm) and a visual representation of all included installation accessories.
Installation Steps:
- Prepare the Socket: Open the rear cover of the socket and guide the electrical wires through the designated cable entries. Ensure the waterproof connection sleeves are properly used to seal the cable entry points.
- Wire Connections: Connect the neutral wire (blue), earth wire (green/yellow), and live wire (brown/black) to their respective terminals inside the socket. Ensure all connections are secure and properly insulated.
- Secure the Rear Cover: Once wiring is complete, tighten the rear cover with the provided screws to ensure a watertight seal.
- Mounting: Secure the socket to the desired surface (e.g., wall) using the expansion screws and wall plugs.
- Final Closure: Close the waterproof front cover and fasten the buckles securely. If using a plug, insert it into the socket before closing the cover.
Figure 4: Visual guide for connecting wires and securing the socket during installation.
Figure 5: The socket with its cover open, revealing the two outlets and individual switches, ready for wiring or plug insertion.
Figure 6: Key features for secure and waterproof installation, including the keyhole for a padlock, waterproof joint sleeves, rubber gaskets for sealing, and mounting holes.
Operating Instructions
The Upgrow IP66 Double Outdoor Socket is designed for straightforward operation.
- Connecting a Device: Open the front cover of the socket. Insert the plug of your electrical device into one of the two sockets.
- Activating Power: Use the individual switch located above each socket to turn the power ON or OFF for that specific outlet. The switch will typically have an indicator light when active.
- Securing the Connection: After inserting the plug and activating the power, close the front cover and fasten the buckles. The deep socket design (34mm) ensures that most conventional plugs can be fully inserted, allowing the cover to close securely and maintain the IP66 waterproof rating.
- Security: For added security, a padlock can be inserted through the designated keyhole on the cover to prevent unauthorized access or accidental disconnection.
Figure 7: The Upgrow socket features a 34mm deep design, allowing full insertion of various plugs and enabling the waterproof cover to close properly, unlike shallower sockets.
Maintenance
Regular maintenance ensures the longevity and safe operation of your Upgrow IP66 Double Outdoor Socket.
- Cleaning: Clean the exterior of the socket with water and a soft cloth or brush. Avoid using abrasive cleaners or solvents that could damage the plastic housing or seals.
- Seal Inspection: Periodically inspect the rubber seals around the cover and cable entries for any signs of wear, cracks, or damage. Damaged seals can compromise the IP66 rating. Replace if necessary.
- Connection Check: Occasionally, with the power off, check that all electrical connections inside the socket remain tight and secure.
- Cover Integrity: Ensure the cover closes properly and the buckles engage securely to maintain its waterproof and dustproof properties.
Troubleshooting
If you encounter issues with your Upgrow IP66 Double Outdoor Socket, consider the following common solutions:
- No Power to Device:
- Ensure the individual switch for the specific socket is in the 'ON' position.
- Check if the main power supply to the socket is active at your circuit breaker.
- Verify that the device itself is functioning correctly by testing it in another known working outlet.
- Inspect the plug for full insertion into the socket.
- Water Ingress:
- Ensure the front cover is fully closed and the buckles are securely fastened.
- Check the condition of all rubber seals and gaskets. Replace any damaged seals immediately.
- Verify that the cable entry points are properly sealed with the waterproof connection sleeves.
- Loose Connections: If you suspect loose wiring, turn off the main power supply and carefully re-check all internal wire connections. If unsure, consult a qualified electrician.
Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 16.8 x 10.5 x 9.8 cm |
| Weight | 620 g |
| Model Number | 1 |
| Brand | Upgrow |
| Material | Plastic (ABS) |
| Color | Grey |
| Rated Voltage | 220V-250V |
| Rated Current | 16A |
| Insulation Resistance | 50 MΩ |
| IP Rating | IP66 (Waterproof and Dustproof) |
| Recommended Uses | Garden, Exterior Walls, Bathrooms, Kitchens, Basements, Laundry Rooms, Garages, Workshops |
| Special Feature | Lockable Cover, Individual Switches |
| UPC | 797424057450 |
Warranty Information
No specific warranty information is provided with this product. Please refer to your retailer or the manufacturer's official website for details regarding warranty terms and conditions.
Customer Support
For technical assistance, product inquiries, or further support, please contact Upgrow customer service. Contact details are typically available on the product packaging, the manufacturer's official website, or through your point of purchase.