Introduction
Thank you for choosing the Mobler Fresno Extendable TV Panel. This manual provides essential information for the safe assembly, installation, and maintenance of your new TV panel. Please read these instructions carefully before beginning assembly and retain this manual for future reference.
Important Safety Information
- Always follow the assembly instructions precisely. Incorrect assembly can lead to instability and potential injury.
- Ensure all hardware is securely tightened before use. Periodically check and re-tighten fasteners as needed.
- Do not overload the panel. Refer to the specifications for maximum weight capacity.
- Keep small parts and packaging materials away from children and pets to prevent choking hazards.
- Use appropriate tools for assembly. Do not use power tools unless specifically instructed, as over-tightening can damage components.
- Mount the panel to a sturdy wall structure. Consult a professional if unsure about wall type or mounting methods.
Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact Mobler customer support.
- Main TV Panel Sections
- Side Extension Panels (if applicable)
- Mounting Hardware (screws, wall anchors, brackets)
- Assembly Fasteners (dowels, cam locks, screws)
- Instruction Manual (this document)
Image: Components of the Mobler Fresno TV Panel. This image shows the main panel sections and the wooden side accents, illustrating the product's design.
Setup and Assembly Instructions
Assembly typically requires two adults. Ensure you have a clear, spacious area for assembly. Tools required: Phillips head screwdriver, hammer, measuring tape, level, pencil, and a drill (for wall mounting).
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Refer to the parts list (if provided separately) to identify each piece.
- Assemble Main Panel Sections: Connect the main panel sections using the provided dowels and cam locks. Ensure the edges align perfectly. Tighten cam locks securely.
- Attach Side Accents: Secure the wooden side accents to the main panel using the designated screws. Do not overtighten.
- Prepare for Wall Mounting:
- Determine the desired height and position for your TV panel on the wall.
- Mark the drilling points for the wall mounting brackets using a pencil and a level to ensure accuracy.
- Drill pilot holes at the marked points. Use appropriate drill bits for your wall type (e.g., masonry bit for concrete, wood bit for studs).
- Insert wall anchors into the pilot holes if required for your wall type.
- Mount the Panel: Attach the mounting brackets to the wall using the provided screws. Carefully lift the assembled TV panel and hook it onto the wall brackets. Ensure it is securely seated and level.
- Final Checks: Verify that the panel is stable and all connections are secure.
Image: Fully assembled Mobler Fresno TV Panel. This image illustrates the panel installed on a wall, ready for use with a television.
Operating and Usage
The Mobler Fresno TV Panel is designed to securely hold your television and provide an aesthetic backdrop. Follow these guidelines for optimal use:
- TV Placement: Carefully place your television onto the designated area of the panel. Ensure the TV's base is stable and centered. If using a wall-mounted TV, ensure the TV mount is compatible with the panel's design and wall structure.
- Cable Management: Utilize any integrated cable management features (e.g., cutouts, channels) to route TV and media device cables neatly behind the panel. This helps maintain a clean appearance and prevents tripping hazards.
- Weight Capacity: Do not exceed the maximum weight capacity specified in the 'Specifications' section for your television and any other items placed on the panel.
- Extendable Feature: The panel's extendable design allows for adjustment to fit various TV sizes up to 60 inches. Ensure the extension is securely fastened in your desired position.
Care and Maintenance
Proper care will extend the life and appearance of your Mobler Fresno TV Panel:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishes that may damage the finish. Dry immediately with a clean cloth.
- Dusting: Regularly dust the panel with a dry, soft cloth to prevent dust buildup.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration of the panel's finish.
- Liquid Spills: Immediately wipe up any liquid spills to prevent staining or damage to the material.
- Hardware Check: Periodically inspect all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
Troubleshooting
If you encounter any issues with your TV panel, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Panel feels wobbly after assembly. | Loose fasteners or incorrect wall mounting. | Check all screws and cam locks and tighten them. Ensure wall mounting brackets are securely fastened to a sturdy wall stud or appropriate anchors. |
| Parts do not fit together. | Incorrect orientation of parts or manufacturing defect. | Review the assembly instructions carefully to ensure parts are oriented correctly. If parts are still not fitting, contact customer support. |
| Scratches or damage during assembly. | Lack of protective surface during assembly. | Always assemble on a soft, clean surface. For minor scratches, touch-up pens may be available from the manufacturer. |
If the problem persists or is not listed here, please contact Mobler customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | Mobler |
| Model Name | Fresno |
| Product Dimensions | 131 x 6 x 45 cm (Length x Width x Height) |
| Product Weight | 18.5 kg |
| Maximum TV Size | Up to 60 inches |
| ASIN | B0D2J99V2D |
| EAN | 7909350118232 |
Warranty and Customer Support
Mobler products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Mobler website.
If you require assistance with assembly, have questions about your product, or need to report missing/damaged parts, please contact Mobler customer support:
- Website: www.mobler.com.br (Note: This is a placeholder URL, please refer to your product documentation for the correct support contact.)
- Email: Refer to Mobler's official website for contact email.
- Phone: Refer to Mobler's official website for contact phone number.