Medivon Kitty Scalp Massager User Manual

1. Introduction

Thank you for choosing the Medivon Kitty Scalp Massager. This device is designed to provide a gentle and comforting scalp massage, stimulating nerve points for relaxation and tension relief. It also aims to improve blood circulation, potentially promoting hair growth. With its unique design, four operating modes, variable massage speed, and phototherapy feature, the Medivon Kitty offers a customizable and beneficial massage experience. Its wireless and portable nature makes it ideal for use at home, in the office, or while traveling.

2. Important Safety Information

• Not Waterproof: This device is not waterproof. Do not immerse it in water or use it in wet environments (e.g., shower, bath). Clean only with a damp cloth.
• Medical Conditions: Consult your doctor before use if you have any medical conditions, are pregnant, have sensitive skin, or are undergoing medical treatment.
• Children: Keep out of reach of children. This device is not a toy.
• Damage: Do not use the device if it appears damaged. Contact customer support for assistance.
• Charging: Use only the provided charging cable. Do not attempt to modify or repair the device yourself.
• Hair Entanglement: While designed not to damage hair, ensure long hair is tied back to prevent entanglement with the massage rollers.

3. Package Contents

Please check the package for the following items:

• Medivon Kitty Scalp Massager
• USB Charging Cable
• User Manual (this document)

4. Product Overview

The Medivon Kitty Scalp Massager features an ergonomic design for comfortable handling and effective scalp massage. It incorporates multiple massage rollers and an intuitive control panel.

Figure 1: Medivon Kitty Scalp Massager - Front View. This image displays the overall design of the massager, highlighting its ergonomic shape and the four massage rollers at the base.

Figure 2: Medivon Kitty Scalp Massager - Side View with Controls. This image shows the side profile of the massager, indicating the location of the control panel and power indicator lights.

Figure 3: Medivon Kitty Scalp Massager - Charging Port. This image provides a close-up view of the magnetic charging port located on the device, along with the accompanying charging cable connector.

5. Setup

5.1 Charging the Device

1. Before first use, fully charge the Medivon Kitty Scalp Massager.
2. Locate the magnetic charging port on the device (refer to Figure 3).
3. Connect the USB charging cable to the massager's charging port. The magnetic connector will snap into place.
4. Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer's USB port.
5. The indicator lights on the device will show the charging status. Once fully charged, the lights will indicate completion (refer to device specific light patterns).
6. A full charge typically takes approximately 2-3 hours and provides several hours of use, depending on the mode selected.

6. Operating Instructions

6.1 Powering On/Off

• To power on the device, press and hold the power button (usually located on the top or side, refer to Figure 2) for a few seconds until the device activates.
• To power off, press and hold the power button again until the device shuts down.

6.2 Selecting Massage Modes and Speed

The Medivon Kitty offers four distinct operating modes and variable massage speed:

• After powering on, short press the mode button (often integrated with the power button or a separate button) to cycle through the available massage modes.
• Each press will switch to a different mode, offering variations in rotation direction, intensity, or pattern.
• Some models may have dedicated buttons for speed adjustment. Refer to the indicator lights for the current mode and speed setting.

6.3 Activating Phototherapy

The device includes a phototherapy feature for an enhanced relaxing effect:

• To activate or deactivate phototherapy, press the dedicated phototherapy button (if available) or a specific combination of presses on the mode/power button.
• The phototherapy lights will illuminate when active.

6.4 Using the Massager

1. Ensure your hair is dry and free from tangles. For long hair, it is recommended to tie it back.
2. Power on the device and select your desired massage mode and speed.
3. Gently place the massage rollers onto your scalp.
4. Move the massager slowly across different areas of your scalp, applying light pressure.
5. Use for approximately 5-10 minutes per session, or as desired. Avoid prolonged use in one area.
6. After use, power off the device.

7. Maintenance

7.1 Cleaning

• Always power off the device before cleaning.
• Wipe the surface of the massager with a soft, slightly damp cloth.
• Do not use abrasive cleaners, alcohol, or harsh chemicals, as these may damage the device.
• Ensure no water enters the charging port or any openings.
• Allow the device to air dry completely before storing or recharging.

7.2 Storage

• Store the massager in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep it away from moisture and dust.
• If storing for an extended period, charge the device periodically (e.g., every 3 months) to maintain battery health.

8. Troubleshooting

9. Specifications

10. Warranty and Support

Medivon products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Medivon website.

If you encounter any issues or have questions about your Medivon Kitty Scalp Massager that are not covered in this manual, please contact Medivon customer support for assistance. Contact details can typically be found on the product packaging or the official Medivon website.