OPPSK 500W 960 LEDs RGBW Stage Strobe Light User Manual

1. Introduction

This manual provides essential information for the safe and effective operation of your OPPSK 500W 960 LEDs RGBW Stage Strobe Light. Please read these instructions thoroughly before installation and use. Retain this manual for future reference.

2. Safety Information

• Always connect the fixture to a grounded circuit to avoid the risk of electrocution.
• Ensure the power voltage matches the specified voltage for the fixture.
• Do not operate the fixture if the power cord is damaged.
• Avoid direct eye exposure to the light source, as it can cause eye injury.
• Ensure adequate ventilation around the fixture to prevent overheating.
• Disconnect power before cleaning or servicing the fixture.
• This fixture is designed for indoor use only.

3. Package Contents

Verify that all components are present upon unpacking:

• 1 x OPPSK 500W 960 LEDs RGBW Stage Strobe Light
• 1 x Metal Bracket
• 2 x Screws Knobs
• 1 x Power Cord
• 1 x User Manual

Image: Contents of the product package, showing the strobe light, metal bracket, power cord, and user manual.

4. Product Overview

The OPPSK 500W 960 LEDs RGBW Stage Strobe Light is a versatile lighting fixture featuring 864 RGB LEDs and 96 cold white SMD LEDs. It offers dynamic strobe effects, vibrant color washes, and chasing effects across 16 individually controllable zones.

4.1 Front Panel

Image: Front view of the strobe light, showcasing the RGB and white LED arrangement.

Image: Breakdown of the LED types, showing 864 RGB LEDs for color and 96 white LEDs for strobe effects, organized into 16 controllable segments.

4.2 Rear Panel and Controls

Image: Rear panel illustrating the LED display, control buttons (Menu, Up, Down, Enter), 3-pin DMX In/Out ports, cooling fan, and Power In/Out ports.

• LED Display: A 4-button menu digital display for navigating and changing fixture functions.
• Control Buttons: Menu, Up, Down, Enter buttons for configuration.
• DMX In/Out Ports: 3-pin XLR connectors for DMX control and daisy-chaining.
• Power In/Out Ports: Twist-locking connectors for power input and daisy-chaining up to 6 fixtures at 110V.
• Cooling Fan: Smart start-stop cooling system to maintain optimal operating temperature.

5. Setup

5.1 Mounting

The fixture can be mounted using the included metal bracket. Ensure the mounting surface or truss is capable of supporting the weight of the fixture. Secure the bracket with the provided screws and knobs, adjusting the angle as needed.

5.2 Power Connection

Connect the provided power cord to the Power In port on the rear of the fixture and then to a grounded power outlet (110V). For multiple fixtures, use the Power Out port to daisy-chain power to additional units. A maximum of 6 fixtures can be daisy-chained on a 110V circuit.

5.3 DMX Connection (Optional)

For DMX control, connect a DMX controller to the DMX In port using a 3-pin XLR cable. To control multiple fixtures, connect the DMX Out of the first fixture to the DMX In of the next, and so on.

6. Operating Modes

The OPPSK Stage Strobe Light offers several operating modes, selectable via the LED display and control buttons on the rear panel.

Image: Visual representation of the available operating modes for the strobe light.

• Auto Play Mode: The fixture cycles through pre-programmed light shows automatically.
• Show Mode: Select from a variety of built-in effects and programs.
• Sound Activated Mode: The light reacts to ambient sound or music, creating dynamic effects.
• Static Color Mode: Choose and display a single static color.
• Master-Slave Mode: Link multiple fixtures where one acts as the master, controlling all connected slave units.
• DMX Mode: Provides external control over all fixture parameters via a DMX controller.

Image: Examples of various light effects and patterns achievable with the fixture.

7. DMX Control

The fixture supports DMX512 protocol, allowing for precise control over its functions. It features RDM (Remote Device Management) for remote debugging and address setting. Multiple DMX channel modes are available:

• 4 DMX Channels
• 11 DMX Channels
• 32 DMX Channels
• 39 DMX Channels

Each DMX channel mode offers different levels of control, from basic functions to individual pixel control for RGB LED (8 segments) and White LED (8 segments). Refer to the DMX chart in the full user manual for detailed channel assignments.

8. Maintenance

8.1 Cleaning

Regular cleaning helps maintain optimal light output and extends the fixture's lifespan. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a mild glass cleaner can be used. Ensure the fixture is powered off and cool before cleaning.

8.2 Storage

When not in use, store the fixture in a dry, dust-free environment. If storing for extended periods, consider using the original packaging for protection.

9. Troubleshooting

10. Specifications

11. Warranty and Support

The OPPSK 500W 960 LEDs RGBW Stage Strobe Light comes with a 12-month warranty. For any inquiries or technical assistance, please contact customer support. Email service is available 24 hours a day.