Ecolab Aquanomic 2.0 Low Temp Laundry Solid Break

1. Product Overview

The Ecolab Aquanomic 2.0 Low Temp Laundry Solid Break is a highly concentrated, solid laundry detergent designed for use in low-temperature commercial laundry systems. This product is formulated to deliver effective cleaning while being environmentally conscious.

Key Features:

• Inhibits scale formation and controls water hardness to maintain linen whiteness over time.
• Phosphate-free and NPE-free formulation helps protect waterways and the environment.
• Part of the innovative Aquanomic Laundry System, designed for clean, white, and soft linen results with proven water and energy savings (up to 40%).
• Solid chemistry provides small, lightweight packages for easy storage, handling, and loading, resulting in 74% less plastic waste.

Image: Two 6 Lb containers of Ecolab Aquanomic 2.0 Low Temp Laundry Solid Break, packaged together.

2. Important Safety Information

Always read and understand the Safety Data Sheet (SDS) for this product before use. The SDS provides detailed information on safe handling, storage, and emergency procedures. This product is for professional use only.

• Eye Contact: Causes serious eye irritation. Wear appropriate eye protection (e.g., safety goggles) when handling.
• Skin Contact: May cause skin irritation. Wear protective gloves.
• Ingestion: Harmful if swallowed. Do not ingest.
• Inhalation: Avoid breathing dust or fumes. Use in a well-ventilated area.
• Storage: Store in original container in a cool, dry place, away from incompatible materials and direct sunlight. Keep out of reach of children and unauthorized personnel.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is a laundry chemical, not a dietary supplement.

3. Preparation and Setup

This product is designed for use with an Ecolab Aquanomic dispensing system. Ensure your laundry facility is equipped with the appropriate dispenser before attempting to use this product.

1. Inspect Dispenser: Verify that the Aquanomic dispensing unit is clean and in good working order.
2. Prepare Product: Carefully remove the solid break container from its packaging. Do not remove the protective film or wrapper from the solid product itself, as it is designed to dissolve in the dispenser.
3. Load Dispenser: Following the instructions for your specific Aquanomic dispensing system, load the solid break container into the designated compartment. Ensure it is seated correctly to allow for proper dissolution and dispensing.
4. Verify Connection: Confirm all water and chemical lines to the dispenser are securely connected and free from leaks.

4. Operating Instructions

The Ecolab Aquanomic 2.0 Low Temp Laundry Solid Break is automatically dispensed by the Aquanomic system. Proper operation relies on the correct programming and maintenance of your laundry machines and dispensing unit.

1. Load Laundry: Place soiled linens into the washing machine according to the machine's capacity and load type.
2. Select Program: Choose the appropriate low-temperature wash program on your laundry machine. The Aquanomic system is designed to work optimally with specific low-temperature cycles.
3. Start Cycle: Initiate the wash cycle. The Aquanomic dispenser will automatically add the correct amount of Solid Break at the appropriate stage of the wash cycle.
4. Monitor Performance: Periodically observe the wash process and the cleanliness of the laundered items to ensure optimal performance.

For specific dosage rates and program settings, consult your Ecolab service representative or the documentation provided with your Aquanomic dispensing system.

5. Care and Maintenance

The Ecolab Aquanomic 2.0 Low Temp Laundry Solid Break is a consumable product and does not require maintenance itself. However, regular maintenance of the associated Aquanomic dispensing system and laundry machines is crucial for consistent performance.

• Dispenser Cleaning: Follow the manufacturer's guidelines for routine cleaning of the Aquanomic dispenser to prevent buildup and ensure proper chemical delivery.
• Machine Maintenance: Adhere to the maintenance schedule for your laundry machines, including cleaning filters, checking water levels, and inspecting hoses.
• System Checks: Regularly check the entire laundry system for any signs of wear, leaks, or blockages.

6. Troubleshooting

If you encounter issues with your laundry results or the dispensing system, consider the following common troubleshooting steps:

• Poor Cleaning Results:
  • Verify the correct wash program is selected.
  • Check if the Solid Break container in the dispenser is empty or nearly empty.
  • Ensure water temperature is consistent with low-temp requirements.
  • Confirm laundry machine is not overloaded.
• Residue on Linens:
  • Check for proper rinsing cycles in the wash program.
  • Inspect the dispenser for any blockages that might affect dissolution.
• Dispenser Not Functioning:
  • Ensure the dispenser has power and is correctly connected to the laundry machine.
  • Check for any error codes on the dispenser unit.
  • Confirm water supply to the dispenser is active.

For persistent issues, contact your Ecolab service representative for professional assistance.

7. Product Specifications

8. Storage and Disposal

Storage:

• Store in a cool, dry, well-ventilated area.
• Keep containers tightly closed when not in use.
• Store in original packaging.
• Protect from freezing and direct sunlight.
• Keep away from incompatible materials (e.g., strong acids, strong bases).

Disposal:

• Dispose of contents and container in accordance with local, regional, national, and international regulations.
• Empty containers may contain product residue. Do not reuse empty containers.
• Consult local waste management authorities for proper disposal methods for chemical products.

9. Warranty and Support

For information regarding product warranty, technical support, or service inquiries, please contact your authorized Ecolab distributor or Ecolab customer service directly. Contact details can typically be found on the product packaging or the official Ecolab website.

Ecolab is committed to providing high-quality products and support to ensure your satisfaction and operational efficiency.