AKOFUN 12000mAh Rechargeable Work Light with Detachable Tripod User Manual

Introduction

This manual provides detailed instructions for the safe and efficient operation of your AKOFUN 12000mAh Rechargeable Work Light with Detachable Tripod. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

• Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
• Keep away from water and moisture. This product is IP66 waterproof, but avoid submersion.
• Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel.
• Use only the provided or recommended charging cables and adapters.
• Keep out of reach of children.

Package Contents

• Rechargeable LED Work Light with stand
• USB-C Cable
• User Manual

Image: The AKOFUN work light, tripod stand, USB-C charging cable, and user manual are included in the package.

Product Overview

The AKOFUN 12000mAh Rechargeable Work Light is designed for versatile illumination in various environments. Key features include:

• 12000mAh Rechargeable Battery: Provides extended operation and functions as a power bank via USB-C and Type-C ports. Offers up to 22 hours of light at low brightness.
• Adjustable Triple Lamp Heads: Three LED lamp heads can be adjusted vertically 180° and horizontally 270° for precise lighting.
• Multiple Lighting Modes: Features 3 brightness modes (2500/5000/10000 Lumen) and 3 color temperatures (3500K/4500K/6500K), including white, yellow, white&yellow flood light, spotlight (8300K), and SOS strobe.
• Versatile Tripod Stand: Height adjustable from 29.13 to 78.74 inches. The lamp head can be removed for independent use. Includes a magnetic base and a foldable hook design for various mounting options.
• Wide Applicability: Suitable for garage work, camping, emergency lighting, car repair, construction, and outdoor activities.

Image: The AKOFUN work light displayed in its full tripod configuration, a shorter tripod configuration, and as a compact handheld unit.

Setup

1. Assemble the Tripod: Extend the tripod legs until they lock into place. Ensure the tripod is stable on a flat surface.
2. Attach the Light Head: Securely attach the main light unit to the top of the tripod pole.
3. Adjust Height: Loosen the locking mechanisms on the tripod pole sections, extend to the desired height (29.13 to 78.74 inches), and tighten the locks.
4. Adjust Lamp Heads: Each of the three lamp heads can be rotated 180° vertically and 270° horizontally. Position them to direct light as needed.

Image: Illustration of the adjustable lamp heads, demonstrating 180° vertical and 270° horizontal rotation, and the magnetic base and hook features.

Operating Instructions

1. Power On/Off: Press and hold the power button (usually marked with a power symbol) for 2-3 seconds to turn the light on or off.
2. Change Brightness: Short press the power button to cycle through the 3 brightness modes: 2500 Lumen (Weak), 5000 Lumen (Medium), and 10000 Lumen (Strong).
3. Change Color Temperature: Short press the mode button (often marked with a sun or light bulb symbol) to cycle through the 3 color temperatures: 3500K (Warm Light), 4500K (Natural Light), and 6500K (White Light).
4. Spotlight Mode: Some models may have a dedicated spotlight mode. Refer to the specific button markings for activation.
5. SOS Strobe: To activate the SOS strobe, typically press and hold the mode button or cycle through modes until the strobe appears.
6. Power Bank Function: Connect your device (phone, laptop, etc.) to the USB-C or Type-C output port on the work light using an appropriate cable. The work light's battery will then charge your device.

Image: Visual guide to the various lighting modes and brightness settings available on the AKOFUN work light.

Charging the Device

The AKOFUN work light is equipped with a 12000mAh rechargeable battery. To charge:

1. Connect the provided USB-C cable to the charging input port on the work light.
2. Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a powered USB port.
3. The indicator lights on the device will show the charging status. A full charge typically takes 7-8 hours.
4. Once fully charged, disconnect the charging cable.

Image: The work light's battery capacity and its ability to charge external devices are highlighted.

Maintenance

• Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the work light in a cool, dry place when not in use. If storing for extended periods, charge the battery periodically to maintain its health.
• Battery Care: Avoid fully discharging the battery frequently. For optimal battery life, charge before it completely drains.

Troubleshooting

Specifications

Image: Detailed dimensions of the work light and its adjustable tripod.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official AKOFUN website. Keep your proof of purchase for warranty claims.