Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your HEALLILY Stainless Steel Soap Dispenser, Model 19254T536JEJJODNOS4YPL8. Please read this manual thoroughly before using the product to ensure safe and efficient operation. Keep this manual for future reference.
Safety Information
- Do not use abrasive cleaners or scouring pads on the stainless steel finish, as this may scratch the surface.
- Ensure the dispenser is placed on a stable, flat surface to prevent tipping.
- Keep out of reach of children to prevent accidental ingestion of contents.
- Avoid dropping the dispenser, especially the glass bottle, to prevent breakage.
- Only use liquids intended for soap dispensers, such as liquid hand soap, dish soap, lotion, or shampoo. Do not use corrosive chemicals.
Package Contents
Verify that all items are present in the package:
- 1 x HEALLILY Stainless Steel Soap Dispenser (Stainless Steel Pump Head, Stainless Steel Housing, Glass Bottle Container)
Figure 1: Components of the HEALLILY Soap Dispenser. The image highlights the glass bottle container, stainless steel housing, and stainless steel pump head.
Product Overview
The HEALLILY Stainless Steel Soap Dispenser is designed for dispensing liquid soaps, lotions, or shampoos in bathrooms and kitchens. It features a durable stainless steel pump and housing, combined with a clear glass bottle for easy monitoring of liquid levels.
Figure 2: HEALLILY Stainless Steel Soap Dispenser.
Figure 3: Product Dimensions and Capacity. The dispenser measures approximately 7.6 inches (19.5 cm) tall and 2.6 inches (6.7 cm) wide, with a 300ml capacity.
Setup
- Unpack: Carefully remove all components from the packaging.
- Disassemble: Unscrew the pump head and stainless steel housing from the glass bottle.
- Fill: Pour your desired liquid soap, lotion, or shampoo into the glass bottle. Do not overfill; leave a small space at the top.
- Reassemble: Carefully screw the stainless steel housing and pump head back onto the glass bottle, ensuring it is securely tightened to prevent leaks.
- Prime the Pump: Press the pump head several times until the liquid begins to dispense.
Figure 4: Dispensing liquid from the pump.
Operating Instructions
To dispense liquid, simply press down on the pump head. The amount dispensed can be controlled by the pressure applied. Release the pump head to allow it to return to its original position.
Figure 5: Dispenser in a bathroom setting.
Maintenance and Cleaning
Regular cleaning will help maintain the appearance and functionality of your soap dispenser.
- Exterior Cleaning: Wipe the stainless steel housing and pump head with a soft, damp cloth. For stubborn spots, use a mild soap solution and then rinse thoroughly with a damp cloth. Dry immediately with a soft, dry cloth to prevent water spots.
- Interior Cleaning (Glass Bottle): Periodically, empty the bottle and rinse it thoroughly with warm water. For a deeper clean, use a bottle brush and mild dish soap. Ensure all soap residue is removed before refilling.
- Pump Cleaning: If the pump becomes clogged or sticky, remove it from the bottle and pump warm water through it until it runs clear. You may also soak the pump mechanism in warm water for a few minutes.
- Avoid: Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish and materials.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not dispensing liquid. | Bottle is empty or liquid level is too low. Pump is clogged. Pump is not primed. | Refill the bottle. Clean the pump mechanism (see Maintenance section). Press the pump head repeatedly until liquid appears. |
| Liquid leaking from the top. | Pump head or housing not securely tightened. Bottle is overfilled. | Ensure the pump head and housing are tightly screwed onto the bottle. Reduce the amount of liquid in the bottle. |
| Pump is stiff or difficult to press. | Soap residue buildup in the pump mechanism. Liquid is too thick. | Clean the pump mechanism thoroughly (see Maintenance section). Dilute the liquid with a small amount of water if suitable for the product. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 19254T536JEJJODNOS4YPL8 |
| Brand | HEALLILY |
| Material | 304 Stainless Steel, Glass |
| Dimensions (Diameter x Height) | Approximately 2.6" (6.7 cm) x 7.6" (19.5 cm) |
| Capacity | 300 ml (approx. 10.1 fl oz) |
| Weight | 13.6 ounces |
| Color | Silver (As Shown) |
Warranty and Support
For warranty information or technical support, please refer to the retailer's return policy or contact HEALLILY customer service through the platform where the product was purchased. Please have your model number (19254T536JEJJODNOS4YPL8) and purchase details available when contacting support.
For more information about HEALLILY products, visit the official HEALLILY store: HEALLILY Store