Introduction
This manual provides comprehensive instructions for the Technical Pro LED Table Lamp with Wireless Charger. This versatile 3-in-1 device integrates a multi-color LED light, a Bluetooth speaker, and a 10W wireless charging pad, designed to enhance your living space with light, sound, and convenience. Please read this manual thoroughly before operation to ensure proper use and maintenance.
Product Overview
Familiarize yourself with the components and controls of your Technical Pro LED Table Lamp.
Figure 1: Front view of the Technical Pro LED Table Lamp, showcasing its integrated wireless charging pad and speaker grille. A smartphone is placed on the charging pad, indicating active wireless charging.
Figure 2: Feature diagram highlighting key functionalities such as 10W Qi-Enabled Wireless Charging, Bluetooth Speaker, Audio Playback Controls, TWS Stereo Sound, LED Multi-Colored Lights, Type C Input, and a 1200mAh Rechargeable Battery.
Figure 3: Control layout and dimensions of the lamp. Key controls are numbered: (1) Light Switch, (2) Mode Switch (Bluetooth/FM/USB/TF/AUX), (3) Volume Down/Previous Track, (4) Play/Pause, (5) Volume Up/Next Track. Also indicates (6) Loudspeaker and (7) Wireless Charging area.
Components and Controls:
- LED Light Panel: Integrated multi-color LED lighting.
- Wireless Charging Pad (7): Top surface for Qi-enabled device charging.
- Loudspeaker (6): Front-facing speaker for audio output.
- Control Buttons (1-5):
- Button 1 (Light Switch): Long press to start/short press to switch lights.
- Button 2 (Mode Switch): Long press for Bluetooth mode/short press for FM/USB/TF/AUX mode.
- Button 3 (Volume Down/Previous Track): Long press to decrease volume, short press once for previous song.
- Button 4 (Play/Pause): Controls audio playback.
- Button 5 (Volume Up/Next Track): Long press to increase volume, short press once for next song.
- USB Type-C Port: For charging the lamp's internal battery.
- SD Card Slot: For direct audio playback from an SD card.
- AUX Input: For wired audio connection.
Setup
- Unpacking: Carefully remove the lamp and all accessories from the packaging. Verify that all components are present: the lamp unit, USB to USB-C charging cable, and audio cable.
- Initial Charging: Before first use, fully charge the lamp using the provided USB-C cable. Connect the USB-C end to the lamp's charging port and the USB-A end to a compatible USB power adapter (not included) or computer USB port. The charging indicator (if present) will show charging status.
- Placement: Place the lamp on a stable, flat surface. Ensure there is adequate space around the lamp for proper ventilation and to allow for wireless charging of devices.
Operating Instructions
Power On/Off:
- To power on the lamp, long press Button 1 (Light Switch).
- To power off the lamp, long press Button 1 again.
Light Functions:
Figure 4: Illustration of the lamp's warm and brilliant colored light modes. The warm light is suitable for bedtime, while the colored light can enhance ambiance.
- Switching Light Modes: Short press Button 1 (Light Switch) to cycle through different light modes, including warm light and various color light options.
- Brilliant Colored Light: Long press Button 2 (Mode Switch) to activate the jumping colored light mode, which can sync with music when Bluetooth is connected.
Bluetooth Speaker & Music Playback:
Figure 5: The lamp functioning as an atmospheric Bluetooth speaker in a social setting, demonstrating its ability to provide background music and ambiance.
- Bluetooth Pairing:
- Long press Button 2 to enter Bluetooth pairing mode. The lamp will indicate it is ready to pair (e.g., a sound prompt or flashing light).
- On your mobile device, enable Bluetooth and search for "A106" (or similar device name).
- Select "A106" to connect. Once paired, the lamp will provide an audio confirmation.
- Audio Playback Controls:
- Play/Pause: Short press Button 4.
- Volume Up: Long press Button 5.
- Volume Down: Long press Button 3.
- Next Track: Short press Button 5.
- Previous Track: Short press Button 3.
- Other Playback Modes (USB Disk, SD Card, AUX):
- Insert a USB disk into the USB port, an SD card into the SD card slot, or connect an audio device via the AUX input.
- Short press Button 2 to cycle through available input modes (FM/USB/TF/AUX). The lamp will automatically detect and play audio from the connected source.
- TWS Couplet Mode (True Wireless Stereo):
Figure 6: Two lamps operating in TWS Couplet Mode, creating a stereo sound experience and synchronized ambient lighting in a room.
To achieve true wireless stereo sound, you can pair two Technical Pro LED Table Lamps together:
- Ensure both lamps are powered on and not connected to any other Bluetooth device.
- On one lamp (this will be the primary unit), long press Button 2 to enter Bluetooth pairing mode.
- On the second lamp (this will be the secondary unit), long press Button 2 to enter Bluetooth pairing mode.
- The two lamps should automatically connect to each other. Once connected, they will indicate TWS pairing (e.g., a specific sound prompt).
- Now, connect your mobile device to the primary lamp via Bluetooth as described above. Audio will play through both lamps in stereo.
10W Wireless Charging Pad:
- Place your Qi-enabled smartphone or other compatible device directly onto the wireless charging pad located on top of the lamp.
- Ensure the device is centered on the charging pad for optimal charging efficiency.
- The lamp will begin charging your device automatically. A charging indicator on your device will confirm charging status.
- Note: Remove any thick cases or metallic objects from your device that may interfere with wireless charging.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the surface of the lamp. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
- Storage: When not in use for extended periods, store the lamp in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the lamp regularly, even if not in constant use.
- Avoid Water: This product is not waterproof. Keep it away from water and high humidity environments.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Connect the lamp to a power source using the USB-C cable and allow it to charge. |
| Wireless charging is not working. | Device not Qi-enabled; device not properly aligned; thick phone case; metallic objects on pad. | Ensure your device supports Qi wireless charging. Realign the device on the pad. Remove thick cases or metallic objects. |
| No sound from speaker. | Volume too low; not connected via Bluetooth; incorrect input mode selected. | Increase volume on both the lamp and your connected device. Ensure Bluetooth is paired or the correct input mode (USB/SD/AUX) is selected. |
| Bluetooth connection unstable. | Device too far; interference; low battery. | Move the connected device closer to the lamp. Avoid obstacles. Ensure the lamp has sufficient battery charge. |
| Light modes not changing. | Incorrect button press. | Ensure you are short pressing Button 1 to cycle through light modes. Long press Button 2 for jumping colored light. |
Specifications
| Model Number | TPGLAMP3 |
| Dimensions | 9.45"D x 3.15"W x 9.25"H |
| Item Weight | 1.85 pounds |
| Power Source | Battery Powered (Rechargeable 1200 mAh) |
| Wireless Charging Output | 10W |
| Light Source Type | LED (Multi-color and Warm Light) |
| Connectivity | Bluetooth, USB, SD Card, AUX |
| Control Method | Touch Buttons |
| Material | Plastic |
| Color | White |
Warranty and Support
Warranty information for the Technical Pro LED Table Lamp with Wireless Charger is not provided within this manual. For details regarding warranty coverage, technical support, or service inquiries, please refer to the product packaging or contact Technical Pro customer service directly through their official website or the retailer from whom the product was purchased.
For further assistance, please visit the Technical Pro Store on Amazon.
