1. Introduction
This manual provides essential information for the safe and effective use of your FIT KING Air Compression Recovery System. This system is designed to provide dynamic pressure massage to your legs, aiding in muscle recovery, reducing pain, and improving circulation. Please read it thoroughly before initial setup and operation, and retain it for future reference.
Image 1.1: The FIT KING Air Compression Recovery System, showing the control unit connected to the leg boots.
2. Safety Information
To ensure safe operation and prevent injury or damage, please adhere to the following safety guidelines:
- Do not use during sleep.
- Unplug the device when not in use.
- Consult a doctor if you have health conditions like deep vein thrombosis or are pregnant.
- Avoid excessive pressure adjustments.
- Keep out of reach of children.
- Do not use if the device or power cord is damaged.
- Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.
3. Package Contents
The FIT KING Air Compression Recovery System package typically includes the following components:
- Leg Compression Boots (Pair)
- Control Unit
- Air Hoses (pre-attached or separate)
- Power Adapter (for charging)
- User Manual
- Premium Carrying Bag
4. Product Features
The FIT KING Air Compression Recovery System incorporates advanced features for effective and convenient leg massage:
- Cordless & Portable Design: Equipped with a 2500mAh high-capacity battery, providing 3-4 hours of use on a full charge. Includes a carrying bag for portability.
- Full Leg Coverage: Features 4 large overlapped airbags designed to wrap and massage the entire leg, including the junction zones.
- Customized Zone Massage: The digital control unit allows selection of specific areas (Foot, Lower Calf, Upper Calf, Thigh) for individual massage.
- Multiple Settings: Offers 3 massage modes, 12 pressure intensities (ranging from 40-150 mmHg), and 10 treatment time options (15-60 minutes).
- Precise Sensor Control: An innovative sensor system precisely controls inflation volume based on leg size, ensuring optimal and safe air pressure.
- Efficient Air Pump: A large-capacity air pump facilitates faster inflation and deflation, delivering dynamic pressure.
- Quiet Operation: Mute Pump technology minimizes noise disturbance during use.
- User-Friendly Interface: Features a large LCD display for easy monitoring and adjustment of settings.
- Easy Wear: Zipper design on the boots allows for easy application and removal.
Image 4.1: Cordless Air Compression Recovery System in use, illustrating its benefits.
Image 4.2: Illustration of the 4 large overlapped airbags for comprehensive leg massage.
Image 4.3: Visual representation of the Intelligent Pressure Sensor Technology.
5. Setup
Follow these steps to set up your FIT KING Air Compression Recovery System:
- Unpack Components: Carefully remove all items from the packaging.
- Connect Air Hoses: Connect the air hoses from each leg boot to the corresponding ports on the control unit. Ensure the connections are firm and secure to prevent air leakage.
- Charge Control Unit: Before first use, fully charge the control unit using the provided power adapter. Plug the adapter into the charging port on the control unit and then into a standard electrical outlet. The LCD screen will indicate the charging status. A full charge typically takes several hours.
- Prepare for Use: Once charged, disconnect the power adapter. The system is now ready for operation.
6. Operation
Operating your FIT KING Air Compression Recovery System is straightforward:
- Wear the Boots: Sit comfortably and slide your legs into the compression boots. Ensure your feet are positioned correctly and zip up the boots completely. The zipper design allows for easy wearing.
- Power On: Press and hold the power button on the control unit to turn on the device. The LCD screen will illuminate.
- Select Mode: Use the 'MODE' button to cycle through the 3 available massage modes: Combination, Sequence, and Circulation. Select the mode that best suits your preference.
- Adjust Pressure Intensity: Use the '+' and '-' buttons to adjust the air pressure intensity. There are 12 levels, ranging from 40 mmHg to 150 mmHg. Start with a lower intensity and gradually increase to a comfortable level.
- Set Treatment Time: Use the 'TIME' buttons to select your desired treatment duration, from 15 to 60 minutes.
- Zone Massage (Optional): If you wish to target a specific area, press the 'ZONE' button and select the desired zone (Foot, Lower Calf, Upper Calf, Thigh) using the corresponding controls. You can also use a silicone plug (not included, but can be used with one of the ports) to massage only one leg if desired.
- Start/Pause: Press the 'Play/Pause' button to start the massage. Press it again to pause the massage at any time.
- Power Off: Once your session is complete, or if you need to stop, press and hold the power button to turn off the device.
Image 6.1: Digital control unit for customized operation.
Image 6.2: Customized Zone Massage diagram.
7. Sizing Guide
To ensure optimal fit and performance, please refer to the sizing chart below and measure your legs accurately:
| Size | Upper Thigh | Inseam | Height |
|---|---|---|---|
| Small | Up to 26.5" | Up to 30" | 5'1" - 5'8" |
| Medium | Up to 28.5" | Up to 34" | 5'9" - 6'3" |
| Large | Up to 31.5" | Up to 36" | 6'4" - 6'8" |
How to Measure:
- Upper Thigh: Wrap a measuring tape around the thickest part of your upper thigh.
- Inseam: Measure from the crotch to the heel of your leg.
Image 7.1: Sizing chart and measurement guide.
8. Maintenance
Proper maintenance ensures the longevity and hygiene of your device:
- Cleaning: Disconnect the boots from the control unit and power adapter. Wipe the exterior of the boots and control unit with a soft, damp cloth. Do not use abrasive cleaners, solvents, or immerse any part of the device in water.
- Drying: Ensure all components are completely dry before folding and storing.
- Storage: Store the device in its premium carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the device.
9. Troubleshooting
If you encounter any issues with your FIT KING Air Compression Recovery System, refer to the following common troubleshooting steps:
- Device not powering on: Ensure the control unit's battery is sufficiently charged. Connect it to the power adapter and try again.
- No compression or weak compression: Check that all air hoses are securely connected to both the leg boots and the control unit. Ensure the boots are worn correctly and the zippers are fully closed. Verify that the selected pressure intensity is not too low.
- Uneven compression: Make sure the boots are properly aligned on your legs and the zippers are fully fastened. Check for any kinks or blockages in the air hoses.
- Unusual noise during operation: A low hum from the air pump is normal. If you hear loud or unusual noises, power off the device and check for any obstructions or loose connections.
- Error message on display: If an error code appears, power off the device, wait a few moments, and power it back on. If the error persists, contact customer support.
If these steps do not resolve the issue, please contact FIT KING customer support for further assistance.
10. Specifications
Key technical specifications for the FIT KING Air Compression Recovery System (Model FT-109A):
- Product Dimensions: 15.75 x 12.2 x 6.1 inches
- Item Model Number: FT-109A
- Batteries: 1 Lithium Polymer battery required (included)
- Material: Nylon
- Item Weight: 4.3 Kilograms (9.48 Pounds)
- Power Source: Battery Powered
- Use For: Legs
- Pressure Intensities: 12 levels (40-150 mmHg)
- Treatment Time: 10 options (15-60 minutes)
11. Warranty and Support
FIT KING is committed to customer satisfaction and product quality.
- Warranty: This product is covered by a 24-month warranty from the date of purchase.
- Customer Support: For warranty claims, technical support, or any questions regarding the operation or maintenance of your FIT KING Air Compression Recovery System, please contact FIT KING customer service. Refer to the contact information provided with your product packaging or visit the official FIT KING website.
