Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your ARES WING Racing Simulator Cockpit with Monitor Mount and Seat. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of the product. This racing cockpit is designed for an immersive simulation experience, offering robust stability, wide compatibility, and extensive adjustability.
1. Setup and Assembly
Careful assembly is crucial for the stability and performance of your racing simulator cockpit. Ensure all components are present before beginning. Refer to the included hardware kit for labeled parts.
1.1 Unpacking and Component Check
Unpack all items from the packaging. Verify that all parts listed in the packing list are present and undamaged. Keep packaging materials until assembly is complete.
1.2 Frame Assembly
Assemble the main frame structure according to the diagram. Ensure all bolts are securely tightened to provide the necessary rigidity. The frame is designed with strengthened components to support high-torque direct drive steering wheels.
Image 1.2.1: Fully assembled ARES WING Racing Simulator Cockpit with Monitor Mount and Seat. This image shows the complete setup, including the racing seat, wheel mount, pedal tray, shifter mount, and integrated monitor stand.
1.3 Seat Installation
Attach the racing seat to the main frame. The seat features a sliding mechanism for fore and aft adjustment and a reclining backrest. Ensure the seat is securely fastened to prevent movement during use.
1.4 Monitor Mount Installation
The detachable monitor mount supports screens up to 50 inches and 77 lbs. It is compatible with VESA patterns 75x75, 100x100, 200x100, 200x200, 300x200, and 400x200. Attach the monitor mount to the designated points on the cockpit frame. Secure your monitor to the VESA plate using appropriate screws.
Image 1.4.1: Diagram illustrating the monitor mount's height settings and VESA compatibility. The image details supported screen sizes (32"-50"), weight capacity (77 lbs), and various VESA patterns.
1.5 Peripheral Mounts (Wheel, Pedal, Shifter)
Install your steering wheel, pedal set, and shifter onto their respective mounts. The cockpit features pre-drilled mounting holes for wide compatibility with major brands. The shifter mount can be installed on either the left or right side to suit user preference.
2. Operating Instructions
The ARES WING Racing Simulator Cockpit is designed for an adaptable and comfortable racing experience. Adjustments can be made to optimize your driving posture.
2.1 Ergonomic Adjustments
Customize your driving position using the following adjustments:
- Seat Sliding: The seat can slide 7.1 inches forward and backward to accommodate different leg lengths.
- Seat Recline: The seat back offers a recline range from 90° to 150° for optimal comfort during extended sessions.
- Wheel Mount Tilt: Adjust the steering wheel mount tilt from +25° to -35°.
- Pedal Tilt: The pedal tray can be tilted at 0°, 15°, or 27° to suit your preference.
- Shifter Mount: The shifter mount can be positioned on either the left or right side and offers tilt adjustments of +16°, 0°, or -16°.
- Monitor Mount Height: The monitor mount has two height levels for optimal screen placement.
Image 2.1.1: Visual representation of the cockpit's ergonomic adjustments, including seat sliding (7.1 inches), seat recline (90°-150°), wheel mount tilt (+25° to -35°), gear shifter tilt (+16°/0°/-16°), and pedal tilt (0°/15°/27°).
2.2 Compatibility
The ARES WING Racing Simulator Cockpit is compatible with a wide range of racing peripherals and gaming platforms:
- Steering Wheels: Fanatec, Thrustmaster, Logitech, Moza.
- Pedals: Thrustmaster, Logitech, Fanatec.
- Gear Shifters: Logitech, Fanatec.
- Gaming Platforms: PS5, PS4, Xbox, PC.
Note: Steering wheel, pedals, shifter, and TV are not included with the cockpit.
Image 2.2.1: Diagram illustrating the wide compatibility of the cockpit with various brands of racing wheels, pedals, and gear shifters.
3. Maintenance
Regular maintenance ensures the longevity and optimal performance of your racing simulator cockpit.
- Cleaning: Wipe down the frame and seat with a soft, damp cloth. Avoid abrasive cleaners that may damage the powder-coated finish or PU leather.
- Fastener Check: Periodically check all bolts and fasteners to ensure they remain tight. Re-tighten as necessary to maintain structural integrity and prevent wobbling.
- Non-Slip Feet: Ensure the 8 non-slip support feet on the bottom of the chair are intact and properly positioned to prevent shaking or drifting during intense use.
- Cable Management: Utilize any integrated cable management features to keep wires organized and prevent damage.
4. Troubleshooting
If you encounter issues with your ARES WING Racing Simulator Cockpit, refer to the following common problems and solutions:
- Cockpit Wobbling or Shaking:
- Ensure all assembly bolts are fully tightened.
- Verify that the non-slip leveling feet are properly adjusted and making full contact with the floor.
- Check that the metal braces supporting the frame sections are correctly installed to enhance rigidity.
- Peripherals (Wheel, Pedals, Shifter) Not Fitting:
- Confirm your peripheral brand and model are listed as compatible.
- Ensure you are using the correct mounting hardware for your specific peripheral.
- Adjust the mounting plates as needed; some peripherals may only align with a subset of pre-drilled holes.
- Seat Adjustment Issues:
- If the seat does not slide or recline smoothly, check for obstructions or debris in the tracks.
- Ensure adjustment levers are fully engaged or disengaged as required.
5. Specifications
| Model Number | GRS1002RE |
| Product Dimensions | 53.7 x 27.9 x 42.5 inches (L x W x H) |
| Item Weight | 67.5 pounds |
| Monitor Mount Screen Size | Up to 50 inches |
| Monitor Mount Weight Capacity | 77 lbs |
| Monitor Mount VESA Patterns | 75x75, 100x100, 200x100, 200x200, 300x200, 400x200 |
| Seat Sliding Adjustment | 7.1 inches (fore/aft) |
| Seat Recline Adjustment | 90° to 150° |
| Frame Material | Powder-coated steel |
| Seat Surface Material | High-quality PU leather |
Image 5.1.1: Diagram illustrating the key dimensions of the ARES WING Racing Simulator Cockpit, including overall length, width, height, and individual component measurements.
6. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. ARES WING is committed to customer satisfaction.
6.1 Customer Support
If you require assistance with assembly, operation, or troubleshooting beyond the scope of this manual, please contact ARES WING customer support through the retailer's platform or the official ARES WING website. Please have your model number (GRS1002RE) and purchase details ready when contacting support.
