LS2 Serra Evo Motorcycle Sport Jacket User Manual

1. Introduction

The LS2 Serra Evo Motorcycle Sport Jacket is engineered for motorcycle riders, offering a blend of protection, comfort, and functionality. Constructed from durable polyester fabrics, it features a fixed breathable waterproof membrane and removable protective elements. This manual provides essential information for the proper use, setup, and maintenance of your jacket.

This image displays the rear of the LS2 Serra Evo Motorcycle Sport Jacket. Key features visible include the LS2 logo on the upper back, reflective strips on the sleeves for enhanced visibility, and the 'ALWAYS AHEAD' branding near the lower back. The jacket features adjustable straps on the arms and waist for a customized fit.

2. Key Features

• Construction: 600D 92T polyester fabric with ripstop and stretch polyester for durability and flexibility.
• Waterproofing: Fixed breathable waterproof membrane to protect against elements.
• Lining: Fixed mesh lining for comfort and a removable thermal jacket for varying temperatures.
• Ventilation: Back ventilation system for improved airflow.
• Protection: Abrasion-resistant shoulder panels and safety stitching in high-risk zones.
• Visibility: Reflective details to enhance rider visibility in low-light conditions.
• Comfort: Neck comfort pad.
• Zippers: YKK front zipper and YKK zipper for pants connection.
• Integrated Protectors: Soft slow bounce protectors in shoulders and elbows.
• Removable CE Protectors: Removable CE Shoulder & Elbow Protectors (EN 1621-1: 2012 Level 1).
• Back Protector: LS2 851 Back Protector, Level 2.
• Elbow Protector System: Elbow protector pocket with a variable system allowing for two protector positions.
• Adjustability: Collar closure, buckles on arms and waist, and Velcro sleeve cuffs for a customizable fit.
• Storage: Two zippered side pockets, one inner pocket, one Napoleon chest pocket, and one internal dry-pocket.

3. Setup and Adjustment

3.1 Protector Installation and Adjustment

The jacket comes with removable CE Level 1 shoulder and elbow protectors, and a Level 2 back protector. These are pre-installed. The elbow protector pockets feature a variable system, allowing you to adjust the protector's position for optimal comfort and coverage. Ensure all protectors are correctly seated before riding.

3.2 Fit Adjustment

• Collar: Adjust the collar closure for a snug and comfortable fit around your neck.
• Arms: Utilize the buckle adjustments on the arms to secure the fit and prevent flapping at speed.
• Waist: Adjust the waist buckles to achieve a secure and comfortable fit around your torso.
• Cuffs: Use the Velcro sleeve cuffs to seal around your gloves, preventing wind and water entry.

Important Sizing Note: This jacket features an European cut, which may run smaller than standard US sizing. Refer to the manufacturer's size chart for accurate fitting.

4. Operation

4.1 Wearing the Jacket

Don the jacket and ensure all zippers and closures are securely fastened. Adjust the collar, arm, waist, and cuff straps for a personalized and secure fit.

4.2 Ventilation System

The jacket is equipped with a back ventilation system. Open the ventilation zippers or flaps as needed to allow airflow and regulate internal temperature during warmer conditions. Close them to retain warmth or prevent water entry.

4.3 Pocket Usage

Utilize the various pockets for storing small personal items. Ensure all pocket zippers are closed before riding to prevent items from falling out. The internal dry-pocket is designed to offer additional protection for sensitive items.

5. Maintenance

5.1 Cleaning Instructions

To maintain the longevity and performance of your LS2 Serra Evo jacket, follow these cleaning guidelines:

• Machine Wash: The jacket is machine washable. Before washing, remove all CE protectors (shoulder, elbow, and back) and the removable thermal liner.
• Preparation: Close all zippers and Velcro fasteners to prevent damage during washing.
• Detergent: Use a mild detergent. Avoid bleach or harsh chemicals.
• Temperature: Wash in cold water on a gentle cycle.
• Drying: Do not tumble dry. Hang the jacket to air dry away from direct sunlight or heat sources. Ensure it is completely dry before reinserting protectors and liner.
• Protectors: Clean protectors separately with a damp cloth and mild soap if necessary, then air dry.

6. Specifications

7. Warranty and Support

For information regarding warranty coverage, product support, or any inquiries not covered in this manual, please contact LS2 customer service directly. Refer to the official LS2 website or your purchase documentation for contact details.