AiXun T380 Portable Smart Soldering Station User Manual

1. Introduction

The AiXun T380 Portable Smart Soldering Station is a compact and intelligent tool designed for precision soldering tasks. This non-rechargeable version, equipped with a T210 handle, features advanced temperature control and a robust design, making it suitable for various maintenance needs. Its neural network temperature control algorithm ensures rapid heating, achieving set temperatures in approximately one second.

2. Safety Information

Please read and understand all safety instructions before operating the soldering station. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always work in a well-ventilated area to avoid inhaling solder fumes.
• Wear appropriate personal protective equipment, including safety glasses, to protect against splashes of molten solder.
• The soldering iron tip can reach temperatures up to 450°C. Avoid direct contact with the tip or heated components.
• Place the soldering iron securely in its stand when not in use.
• Ensure the power cord is not damaged and is properly connected to a grounded outlet.
• Do not use the soldering station near flammable materials or gases.
• Keep out of reach of children.

3. Product Components

The AiXun T380 Portable Smart Soldering Station package includes the following items:

• 1 x T380 Portable Smart Soldering Station unit
• 1 x T210 Handle
• 1 x C210 Tip (K-tip)
• 1 x Data Cable
• 1 x Charger

Figure 3.1: Overview of the AiXun T380 Soldering Station and its included components.

4. Setup

4.1 Connecting the Handle and Power

1. Insert the T210 handle cable into the designated port on the T380 soldering station. Ensure a secure connection.
2. Insert the C210 K-tip into the T210 handle.
3. Connect the charger to the soldering station's power input port.
4. Plug the charger into a standard AC 110V-230V power outlet.

4.2 Initial Power-On

Once connected to power, the T380 station will typically power on automatically or can be activated via its power button. The display will illuminate, indicating the current status and temperature settings.

Figure 4.1: The T380 station demonstrating rapid heating capabilities, reaching operational temperature quickly.

Figure 4.2: The T380's display showing the intelligent temperature control system at work.

5. Operating Instructions

5.1 Power On/Off

To power on the device, ensure it is connected to a power source. The unit will typically power on automatically. To power off, press and hold the designated power button, or disconnect from the power source.

5.2 Temperature Adjustment

The T380 allows for precise temperature control within a range of 100°C to 450°C. Use the control buttons or rotary knob on the station to increase or decrease the desired temperature. The current temperature will be displayed on the screen.

5.3 Handle Compatibility and Sleep Stand

The T380 soldering station supports both T210 and T115 handles. The included sleep stand is adjustable, allowing you to set the angle according to your preference for comfortable and safe operation. When the handle is placed in the stand, the station may enter a sleep mode to conserve energy and prolong tip life.

Figure 5.1: The T380 station demonstrating compatibility with T210 and T115 handles, and the adjustable sleep stand.

5.4 Firmware Updates (OTA)

The T380 features convenient WiFi networking for Over-The-Air (OTA) firmware upgrades. This allows the device to receive the latest software versions, ensuring optimal performance and access to new features. Refer to the manufacturer's official website or the device's on-screen menu for instructions on checking for and performing updates.

Figure 5.2: The T380 station connected via WiFi for OTA firmware updates.

6. Maintenance

6.1 Soldering Tip Care

• Always tin the soldering tip with a small amount of solder before and after use to prevent oxidation and extend its lifespan.
• Clean the tip regularly using a damp sponge or brass wool provided in the stand.
• Replace worn or damaged tips promptly to maintain soldering quality.

6.2 Unit Cleaning

• Ensure the unit is powered off and unplugged before cleaning.
• Wipe the aluminum alloy body with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Keep the ventilation slots clear of dust and debris to ensure proper cooling.

7. Troubleshooting

This section addresses common issues you might encounter with your T380 soldering station.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact AiXun customer support for further assistance.

8. Specifications

Detailed technical specifications for the AiXun T380 Portable Smart Soldering Station:

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact AiXun customer service. You can find contact details and additional resources on the official AiXun website or through the AiXun Amazon Store.