SUPNIU Bluetooth Speaker User Manual

Introduction

Thank you for purchasing the SUPNIU A50 (MIC-01) Bluetooth Speaker. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read it thoroughly before use to ensure optimal performance and longevity of your speaker.

Safety Information

• Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping or subjecting the speaker to strong impacts.
• Do not disassemble or attempt to repair the speaker yourself. This will void the warranty.
• Keep the speaker away from water and liquids. This product is not waterproof.
• Use only the provided charging cable and power adapter (if included) to charge the speaker.
• Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.

Package Contents

Please check the box for the following items:

• A50 Bluetooth Party Speaker (1)
• Wireless Microphone (1)
• Remote Control (1)
• AUX Audio Cable (1)
• USB Type-C Cable (2)
• User Manual (1)

Image: The SUPNIU A50 Bluetooth Speaker, accompanied by its wireless microphone and remote control, as included in the package.

Product Overview

Components and Controls

Familiarize yourself with the various parts and controls of your SUPNIU A50 speaker.

Image: Front view of the SUPNIU A50 speaker highlighting the master volume, bass, treble, microphone echo, microphone volume, and lighting control knobs/buttons.

• Master Volume: Adjusts the overall sound output level.
• Bass Control: Adjusts the low-frequency sound level.
• Treble Control: Adjusts the high-frequency sound level.
• Microphone Echo: Controls the echo effect for the microphone.
• Microphone Volume: Adjusts the microphone's sound level.
• Lighting Control: Manages the speaker's LED light show.
• Mode Button: Switches between Bluetooth, FM Radio, AUX, USB, and TF Card modes.
• Play/Pause Button: Controls media playback.
• Previous/Next Track Buttons: Navigates through tracks or FM radio stations.

Image: Side panel of the SUPNIU A50 speaker showing the input ports: MIC, AUX, TF card, USB, DC 5V power connection, and ON/OFF switch.

• MIC Input: 3.5mm jack for connecting the wireless microphone.
• AUX Input: 3.5mm auxiliary audio input for external devices.
• TF Card Slot: For playing music from a TF (MicroSD) card.
• USB Port: For playing music from a USB drive or for recording.
• DC 5V: Power input for charging the speaker.
• ON/OFF Switch: Powers the speaker on or off.

Setup

1. Charging the Speaker

Before first use, fully charge the speaker. Connect the provided USB Type-C cable to the DC 5V port on the speaker and the other end to a compatible USB power adapter (not included) or a computer USB port. The charging indicator will show the charging status. A full charge typically takes 3-4 hours.

Image: Diagram illustrating the charging time (3-4 hours) and playing time (4-15 hours, depending on volume) of the SUPNIU A50 speaker.

2. Powering On/Off

Slide the ON/OFF switch located on the side panel to the 'ON' position to power on the speaker. Slide it to 'OFF' to power off.

3. Bluetooth Pairing

1. Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing 'BLUE' on the display.
2. Enable Bluetooth on your device (smartphone, tablet, etc.).
3. Search for "A50" in your device's Bluetooth list and select it to connect.
4. Once connected, the speaker will emit a confirmation tone, and the 'BLUE' indicator will stop flashing.
5. The speaker will automatically reconnect to the last paired device when powered on, if the device is within range and Bluetooth is enabled.

4. Microphone Setup

To use the wireless microphone:

1. Ensure the speaker is powered on.
2. Insert the microphone's receiver into the MIC input port on the speaker.
3. Power on the wireless microphone. It should automatically connect to the speaker.
4. Adjust the Microphone Volume and Microphone Echo controls on the speaker to your preference.

Image: Diagram showing the SUPNIU A50 speaker and the wireless microphone, illustrating the automatic connection and directional sound pickup of the microphone.

5. Remote Control Setup

The remote control allows for convenient operation of the speaker from a distance. Ensure the remote has batteries installed (if not pre-installed). Point the remote towards the speaker's front panel for optimal response.

Operating Modes

Press the MODE button on the speaker or remote control to switch between the following modes:

1. Bluetooth Mode

After successful pairing (as described in the Setup section), you can stream audio wirelessly from your Bluetooth-enabled device. Use your device's controls or the speaker's Play/Pause and Track buttons to manage playback.

2. FM Radio Mode

In FM mode, the speaker can scan and play local radio stations.

1. Switch to FM mode using the MODE button.
2. Press and hold the Play/Pause button to initiate an automatic scan for available radio stations. The speaker will save found stations.
3. Use the Previous/Next Track buttons to navigate between saved stations.

Image: The SUPNIU A50 speaker being used indoors for FM radio, showing the extendable antenna for improved reception.

3. AUX Mode

Connect external audio devices (e.g., MP3 players, laptops) using the provided 3.5mm AUX cable.

1. Connect one end of the AUX cable to the speaker's AUX input and the other end to your audio device's output.
2. Switch the speaker to AUX mode using the MODE button.
3. Control playback directly from your connected audio device.

4. USB/TF Card Mode

Play music directly from a USB flash drive or TF (MicroSD) card.

1. Insert a USB drive into the USB port or a TF card into the TF Card slot.
2. The speaker will automatically switch to the corresponding mode and begin playing audio files. If not, press the MODE button.
3. Use the speaker's or remote's playback controls to manage music.

5. Karaoke Function

With the wireless microphone connected, you can use the speaker for karaoke. Adjust the microphone volume and echo effects using the dedicated knobs on the speaker for a customized vocal experience.

6. Light Show Control

The speaker features a dynamic LED light show that synchronizes with the music. Use the Lighting Control knob or button to change light patterns or turn the lights on/off.

Image: The SUPNIU A50 speaker displaying various colorful LED light patterns, illustrating the dynamic light show feature.

Maintenance

• Cleaning: Wipe the speaker's surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or solvents.
• Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use, to maintain battery health.

Troubleshooting

Specifications

Image: An internal view of the SUPNIU A50 speaker, highlighting the two 2.5-inch woofers and two 3-inch tweeters, which contribute to its sound output.

Warranty and Support

SUPNIU products come with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use.

For any questions, technical support, or warranty claims, please contact SUPNIU customer service. You can typically find contact information on the product packaging or the official SUPNIU store page on Amazon.

Online Customer Service: 24-hour online support is available for assistance.

Please retain your purchase receipt as proof of purchase for warranty purposes.