blonbar AJ300D02
Blonbar AJ300D02 Bedside Lamp with Wake-up Light User Manual
Model: AJ300D02
Introduction
Thank you for choosing the Blonbar AJ300D02 Bedside Lamp with Wake-up Light. This versatile device combines a bedside lamp with adjustable brightness, a dual alarm clock, natural sound options, and a convenient 10W USB charging port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and user satisfaction.
Package Contents
- Blonbar AJ300D02 Bedside Lamp
- Power Cable
- User Manual (this document)
Setup
- Unpacking: Carefully remove all components from the packaging.
- Placement: Place the lamp on a stable, flat surface such as a bedside table or desk.
- Power Connection: Connect the provided power cable to the lamp's power input port and then plug the adapter into a standard electrical outlet. The clock display will illuminate.
Figure 1: Overview of the Blonbar AJ300D02 lamp with labeled control buttons and power adapter connection. The power output is 5V 2A and power input is DC 12V. The power cable is 1.5m long.
Operating Instructions
1. Setting the Time
- Press and hold the "Alarm" button (often labeled with a bell icon or "SET") until the hour display starts flashing.
- Rotate the adjustment knob (usually on the side or top) to set the desired hour.
- Press the "Alarm" button again to switch to minute adjustment. The minute display will flash.
- Rotate the adjustment knob to set the desired minutes.
- Press the "Alarm" button one more time to confirm the time setting. A short beep will confirm the setting.
- To switch between 12-hour and 24-hour format, press the "12/24H System" button.
Video 1: Demonstration of setting the time and adjusting light intensity on the Blonbar AJ300D02 bedside lamp. The video shows the user interacting with the control buttons and the rotary knob to change the time and cycle through light levels.
2. Adjusting Light Brightness
The lamp features 3 levels of brightness and a "breathing light" mode. The light is touch-controlled.
- Touch any part of the light ring to turn it on to the lowest brightness level (Level 1).
- Touch again to cycle through Level 2, Level 3, and then the "Breathing Light" mode.
- Touch one more time to turn the light off.
Figure 2: Visual representation of the touch control for the bedside lamp, showing the 'Breathing Light' mode and three distinct brightness levels (Level 1, Level 2, Level 3) as adjusted by touch.
3. Dual Alarm Clock and Snooze Function
The lamp includes two independent alarm systems and a snooze function.
- Setting Alarms:
- Press the "Alarm 1" or "Alarm 2" button (labeled with bell icons) to select which alarm to set. The alarm time will flash.
- Use the adjustment knob to set the desired alarm hour.
- Press the respective alarm button again to switch to minute adjustment.
- Use the adjustment knob to set the desired alarm minutes.
- Press the alarm button one more time to confirm.
- You can choose from 10 natural sounds or a wake-up light option for your alarm.
- Snooze Function: When an alarm sounds, press the "Snooze" button to temporarily silence it for 10 minutes. The alarm will sound again after 10 minutes. This can be repeated up to 3 times.
- Disabling Alarm: To turn off an alarm completely, press the corresponding "Alarm 1" or "Alarm 2" button when the alarm is not sounding. The alarm indicator on the display will disappear.
Figure 3: The lamp's display showing the time and different screen brightness levels (Level 1, Level 2, Level 3, Off) to prevent sleep disturbance, along with an illustration of the snooze function.
4. Natural Sounds and Countdown Timer
The lamp offers 10 natural sounds to aid sleep and a countdown timer for automatic shut-off.
- Playing Natural Sounds: Press the "Switch Nature Sound" button (often labeled with a music note or wave icon) to cycle through the 10 available natural sounds.
- Adjusting Volume: Use the adjustment knob to increase or decrease the volume of the natural sounds.
- Countdown Timer: Press the "Countdown Timer" button to set a sleep timer for 30, 60, or 90 minutes. The sounds will automatically turn off after the selected duration.
- Disabling Sounds: Press the "Switch Nature Sound" button again to turn off the sounds.
Figure 4: The bedside lamp playing natural sounds, with icons representing the 10 available sounds: birdsong, ocean wave, flowing water, bonfire, summer night, thunderstorm, fan, rain, music box, and clock ticking. A sleeping baby illustrates the sleep aid function.
5. USB Charging Function
The lamp includes a 10W USB-A charging port for convenient device charging.
- Locate the USB-A charging port on the back of the lamp.
- Connect your device's USB charging cable to this port.
- The lamp provides 5V 2A output for charging.
Figure 5: The Blonbar AJ300D02 bedside lamp with a smartphone connected to its built-in 10W USB fast charging port, illustrating its charging capability and reducing cable clutter.
6. Clock Screen Brightness Adjustment
The clock display brightness can be adjusted to avoid disturbing sleep.
- Locate the screen brightness adjustment button (often labeled with a sun icon or "DIMMER").
- Press this button to cycle through 3 levels of brightness or to turn the display off completely.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the lamp. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, unplug the lamp and store it in a cool, dry place.
- Avoid Water: Keep the device away from water and high humidity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power connection. | Ensure the power cable is securely plugged into the lamp and the wall outlet. |
| Light brightness cannot be adjusted. | Incorrect touch input. | Ensure you are touching the light ring directly. Cycle through the brightness levels by repeated touches. |
| Alarm does not sound. | Alarm not set or volume too low. | Verify alarm settings and ensure the volume is audible. Check if the alarm is enabled (indicator on display). |
| USB charging not working. | Device incompatibility or cable issue. | Ensure your device is compatible with 5V 2A charging. Try a different USB cable. |
Specifications
| Feature | Detail |
|---|---|
| Brand | blonbar |
| Model Number | AJ300D02 |
| Product Dimensions (L x W x H) | 7 x 24 x 24 cm |
| Item Weight | 700 grams |
| Style | Minimalist |
| Color | Beige (Water transfer wood structure) |
| Material | Plastic, Wood |
| Number of Light Levels | 3 (plus Breathing Light mode) |
| USB Charging Output | 10W (5V 2A) |
| Alarm Clocks | 2 |
| Natural Sounds | 10 |
| Snooze Duration | 10 minutes |
| Countdown Timer Options | 30/60/90 minutes |
| Switch Style | Touch |
| Power | 10 Watts |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official blonbar website. Keep your proof of purchase for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.