1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your M-VAVE WP-1 2.4GHz Wireless Guitar System. Designed for electric guitars, basses, and electro-acoustic guitars, this system offers a stable, low-latency, and high-quality audio transmission solution, freeing you from the constraints of cables.
2. Product Overview
2.1 Components
- 1 x M-VAVE WP-1 Transmitter
- 1 x M-VAVE WP-1 Receiver
- 1 x Dual USB Charging Cable
2.2 Key Features
- Upgraded 2.4G Wireless Technology: Provides stable, interference-proof connection.
- Crystal Clear Signal Transmission: 24-bit 48KHz high-quality audio with less than 6ms latency. Effective range of approximately 30 meters.
- Rechargeable System: Built-in rechargeable lithium battery with hours of usage. Includes dual USB charging cable.
- Hassle-Free Plug and Play: Simple pairing by pressing and holding the signal key. Supports up to 6 channels simultaneously.
- Versatile Compatibility: 280° rotatable plug design fits most electric guitars, basses, and electro-acoustic guitars.
2.3 Product Visuals
Figure 1: M-VAVE WP-1 Wireless Guitar System, showing both the black transmitter and silver receiver units.
Figure 2: Illustration of the 2.4GHz wireless guitar system, highlighting its compatibility with various instruments such as vocal microphones, audio mixers, guitars, keyboards, drums, and violins.
Figure 3: Demonstrates the 280° rotatable 1/4" plug design, allowing flexible connection to various guitar types, including those with vibrato systems.
Figure 4: A guitarist enjoying pure sound transmission with the wireless system connected to multiple amplifiers, showcasing 24-bit 48KHz high-quality audio broadcasting with low latency.
Figure 5: Highlights the long working time of 5 hours on a single charge, with convenient recharging via the included USB cable.
Figure 6: Illustrates the system's capability for simultaneous broadcasts on up to 6 channels, allowing multiple devices to operate without interference.
Figure 7: Depicts diverse applications of the wireless system, suitable for personal practice, band performances, individual performances, and family gatherings.
3. Setup
3.1 Initial Charging
Before first use, ensure both the transmitter and receiver units are fully charged using the provided dual USB charging cable. The charging port is a USB-C type.
3.2 Connecting and Pairing
- Plug the transmitter unit into your instrument's 6.35mm output jack. The 280° rotatable plug allows for optimal positioning.
- Plug the receiver unit into your amplifier's 6.35mm input jack.
- Turn on both the transmitter and receiver units by pressing and holding their respective power buttons.
- The units will automatically pair. The indicator lights will change from blinking to solid green once a stable connection is established. No need to re-link for future use after the initial pairing.
For a visual demonstration of the setup and pairing process, please refer to the official product video below:
Video 1: Wireless listening system Demonstration. This video illustrates the physical connection of the transmitter to an instrument and the receiver to an amplifier, followed by the automatic pairing process and a demonstration of sound transmission.
4. Operating Instructions
4.1 Channel Selection
The system supports up to 6 channels simultaneously to avoid interference when multiple wireless systems are in use. To change the channel, simply click the signal key on both the transmitter and receiver units. Ensure both units are set to the same channel for proper operation.
4.2 Instrument Compatibility
The 280° rotatable 6.35mm plug ensures broad compatibility with various electric instruments, including:
- Electric Guitars
- Electric Basses
- Electro-acoustic Guitars
- Other instruments with 6.35mm output jacks and pickups
5. Maintenance
5.1 Battery Care
To prolong battery life, fully charge the units before extended storage. Recharge regularly, even if not in frequent use, to maintain battery health. Avoid exposing the units to extreme temperatures.
5.2 Cleaning and Storage
Wipe the units with a soft, dry cloth. Do not use liquid cleaners or abrasive materials. Store in a cool, dry place away from direct sunlight and moisture when not in use.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent signal. | Units not paired, out of range, low battery, or interference. | Ensure both units are powered on and paired (solid green light). Check battery levels. Reduce distance between transmitter and receiver (max 30m). Try switching to a different channel to avoid interference. |
| High latency or signal degradation. | Environmental interference or excessive distance. | Move closer to the receiver. Avoid obstacles that may block the signal. Ensure no other 2.4GHz devices are causing significant interference nearby. The system is designed for less than 6ms latency. |
| Units not charging. | Faulty cable or power source. | Verify the dual USB charging cable is properly connected. Try a different USB power adapter or port. |
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | WP-1 |
| Item Weight | 5.9 ounces (0.17 Kilograms) |
| Package Dimensions | 5.51 x 4.09 x 1.85 inches |
| Country of Origin | China |
| Compatible Devices | Guitar (Electric, Bass, Electro-acoustic) |
| Connector Type | 6.35mm Jack |
| Material Type | Alloy Steel |
| Power Source | Battery Powered |
| Voltage | 3.7 Volts |
| Wireless Technology | 2.4GHz |
| Audio Transmission Quality | 24-bit / 48KHz |
| Latency | <6ms |
| Effective Range | Approx. 30 meters (100 feet outdoors) |
| Dynamic Range | >105dB |
| Rotatable Plug | 280° |
| Simultaneous Channels | Up to 6 |
8. Support
M-VAVE is committed to providing high-quality products and excellent customer service. If you encounter any issues or have questions regarding your WP-1 Wireless Guitar System, please contact our professional sales support team. We aim to address all consumer questions within 24 hours.
For further assistance, please visit the M-VAVE Store on Amazon.
